ReviewsAc Voltage Tester

Greenlee - Electrical Kit-Basic (Tk-30A), Elec Test Instruments (TK-30A), 10 x 8 x 3'

  • Kit includes multimeter DM-25, non contact voltage detector GT-11, receptacle tester GT-10 and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly.
Check Stock

Amprobe AT-8020 Advanced Industrial Wire Tracer Kit

  • 【FUNCTION UPGRADE】 KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
  • 【QUICK DIAGNOSIS】Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
  • 【WIDELY APPLICATION】Works on 12V 100-2000CCA lead acid batteries , including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. Also, it is suitable for cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors batteries.
  • 【CRANKING & CHARGING SYSTEM TEST】Presents you with the test results (actual cranking voltage & cranking time) of the starter system in milliseconds to indicate if the cranking system is working as expected. Also, the battery load tester conducts a throughout check on the 12V charging system to make sure a normal generator output，perfectly working rectifier diode and under controlled charging current.
  • 【SAFE PROTECTION DESIGN】The battery tester doesn’t emit light, heat or spark, and won’t discharge the battery. It ....
Check Stock

Extech MN24-KIT Electrical Test Kit

  • MN24 Digital Multimeter with large, easy to read display measures AC/DC Voltage, DC Current, Resistance, and Continuity and features Diode and Battery tests.
  • Included 40130 Non Contact Voltage Detector detects AC Voltage from 100VAC to 600VAC with a Flashing LED and Audible beeper.
  • Included ET15 Receptacle Tester tests for faulty wiring in 3 wire outlets with a standard North American 3 prong Plug.
  • Everything you need to stay safe and work smart on DIY home electrical projects.
  • The MN24 KIT includes the MN24 Digital Multimeter, Multimeter Test Leads, 40130 Non Contact Voltage Detector, ET15 Receptacle Tester, Storage Case.
Check Stock

CLHPT VC1018 Non-Contact Voltage Tester，AC 12V-1000V/48V-1000V Electrical Tester Pen Voltage Detector with LED Flashlight Buzzer Alarm Wire Breakpoint Finder (Yellow)

  • NCV non-contact voltage tester：This electrical tester provides non-contact detection of voltage in wires, circuit breakers, lighting fixtures, switches, receptacles and cables. When voltage is detected, a buzzer will sound an alarm and a red indicator light will flash. The buzzer is staggered fast and slow to determine the current AC voltage strength..
  • Adjustable Sensitivity and Dual Range Voltage Detector：This electric testers comes with 2 sensitivity modes, low sensitivity mode (48-1000V AC) and high sensitivity mode (12-1000V AC). Simply press the "S" button to enter the high sensitivity test mode..
  • Safety level： The safety level of the whole machine conforms to CE CAT.III 1000V CAT.IV 600V, and the body is made of high-quality ABS material, with anti-drop insulation. The electrical tester is safe and double insulated, and the body is equipped with a high-performance sensor chip for accurate detection..
  • Flashlight lighting function: The voltage pen tester with flashlight allows you in the dark environment, no longer afraid of not being able to see the location of the measurement, to eliminate the risk of electric shock..
  • Smart shutdown and low power consumption mode：The automatic power-off function can save and extend the battery life. It will....
Check Stock

BSIDE Voltage Tester, EBTN LCD 3-Line Display Voltage Detector, Non-Contact with Adjustable Sensitivity, Dual Range AC Voltage Sensor Pen Live Wire Check Breakpoint Locate with Protect Case

  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application.
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems.
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace.
  • Dual Range testing, select 12-1000V AC or 48-1000V AC.
Check Stock

Voltage Tester Pen Non-Contact with LED Flashlight - 12V to 1000V Dual Range for Broad Application (Voltage Tester Pen)

  • ❤️ Non-Contact Design - The voltage tester features a non-contact and double-insulated design. The NCV sensor automatically identifies the voltage and alerts by sound and light. This voltage detector is safe for electricians, maintenance, service, safety personnel, and homeowners to test live circuits in the workplace or at home..
  • ❤️ Dual Range Voltage Tester - This electrical tester comes with 2 sensitivity modes, high sensitivity mode (12-1000V AC) and low sensitivity mode (48-1000V AC). Simply press the "S" button to adjust the sensitivity for different needs and situations..
  • ❤️ Sound and Light Alarm - When voltage is detected, the voltage tester will flash and beep. You can distinguish live wire and null wire by different sounds and indicators. When all the red lights are on, it means that high voltage and live wire are detected, and only one red light is on to indicate that low voltage and null wire are detected. The higher the voltage detected, the higher the frequency of its beeping sound..
  • ❤️ Auto Shut Off - To save energy and extend battery life, the voltage detector will automatically shut down after about 5 minutes of no operation. The power LED will flash when the battery voltage drops below 2.5V. Please replace the battery p....
Check Stock

uxcell Voltage Tester AC 100-500V with 3mm Slotted Screwdriver with Clip for Circuit Test Clear Pack of 3

  • Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D).
  • It can work as a circuit tester or a screwdriver, makes work more convenient.
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified.
  • The higher the voltage, the brighter the....
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers,....
  • Note: DO NOT touch the voltage tester probe.
Check Stock

Klein Tools NCVT3PKIT Electrical Test Kit Dual-Range Non-Contact Voltage Tester with Flashlight AC/DC Voltage Tester and Carrying Case

  • Electrical test kit contains a non-contact AC voltage tester with integrated flashlight and AC/DC voltage tester.
  • Dual range NCVT-3P with flashlight automatically detects and indicates low voltage (12-1000V) range and standard voltage (70-1000V AC).
  • NCVT-3P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.
  • NCVT-3P is a lightweight, compact tool with pocket clip for convenient storage and quick access.
  • Bright flashlight on the NCVT-3P illuminates work area and may be used independent of voltage detection function.
Check Stock

Klein Tools NCVT-4IR Non-Contact Volt Tester, 12 - 1000V AC Pen with IR Thermometer -22 to 482 deg F, LED and Audible Alarms, Pocket Clip

  • Voltage Tester designed specifically for HVAC applications.
  • Non-Contact Voltage Tester provides non-contact determition of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems.
  • Detects AC voltage from 12 to 1000V with visual and audible indicators.
  • 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius).
  • Convenient laser pointer to target measurement area for temperature measurement.
Check Stock

Klein Tools NCVT-4IR Non-Contact Volt Tester, 12 - 1000V AC Pen with IR Thermometer & RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

  • Product 1: Voltage Tester designed specifically for HVAC applications.
  • Product 1: Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems.
  • Product 1: Detects AC voltage from 12 to 1000V with visual and audible indicators.
  • Product 1: 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius).
  • Product 2: LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
  • Product 2: TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
  • Product 2: DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
  • Product 2: AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.
Check Stock

uxcell Voltage Tester AC 100-500V with 3.5mm Slotted Phillips Screwdriver for Circuit Test Clear and Orange Pack of 2

  • Overall Size: 151 x 23mm /5.95 x 0.91 Inch(L*D).
  • Slotted/Phillips Screwdriver Head Size: 3.5mm / 0.14 Inch.
  • It can work as a circuit tester or a screwdriver, makes work more convenient.
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified.
  • The higher the voltage, the brighter the....
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers,....
  • Note: DO NOT touch the voltage tester probe.
Check Stock