ReviewsAccelerated Epoxy Cure

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..

Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

Secrets of Silicon Valley

J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performanc....

Check Stock

J-B Weld ClearWeld 14ml w/Static Mixer, (50114H)

J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 qt & Dynatron 3 Pack Spreaders, 358

Product 1: EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
Product 1: IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
Product 1: OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
Product 1: BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes an....

Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..

Check Stock

J-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2

J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
Surface Applications: Metal, Most Plastics, PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

SOLAREZ UV Cure Epoxy Pro Travel Kit - Epoxy Surfboard Repair Kit ~ Cures 3 min in The Sun! Epoxy Surfboard Repair, SUP Repair, Epoxy Wakeboard Repair, Low Odor ~ Eco Friendly, Made in The USA!

SOLAREZ UV Cure Epoxy PRO Travel Kit is EPS & Styrofoam Safe,.
Includes Everything You Need for a Professional Repair!.
Zerovoc Styrofoam-safe UV cure resin - 2-part epoxy resin for internal structural repairs - Solarez Microlite-Epoxy for foam repairs - Fiberglass cloth - Rope - Stainless Steel Scissors - Sandpaper - Eco-Friendly Clean Up Solvent - Applicators - Travel Box.

Check Stock

Ding All 24 Ounces Epoxy Resin Kit with 2 Parts Resin to 1 Part hardener For Surfboard Construction, Ding Repairs, and Other Epoxy Repair Projects

...cally designed for surfboards construction and repairs this resin is easy to use. It is mixed in a ratio of 2 parts resin and 1-part hardener. The set comes complete with the correct amount of parts to make a total of 24 FL oz.
POPULAR CHOICE FOR SURFBOARD REPAIR: Ding All Epoxy Resin Kit is a popular choice among professionals for ding repairs and epoxy surfboard repair because of its exceptionally high strength, low odor while curing and a working time of around 30 minutes.
CURING TIME: The epoxy resin has a 30 - minute working time, 2 to 3 hours of gel time and 6 to 8 hours full cure figured at 77 F. The curing speed may change based on colder or warmer temperatures. The resin and has no harmful VOS’s during cure, is better for the environment.
HIGH QUALITY PRODUCT: The Ding All Resin is Ultra Clear- Nano Technology, UV Stable to help prevent yellowing, allows easy sanding, is used for ultra strong and bright lamination and hot coats. The product has low viscosity, low bubble retention and has an excellent high gloss, mirror-like finish.
ORIGINAL SURFBOARD EPOXY RESIN KIT: The....

Check Stock

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml

J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl). J-B Weld PlasticWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure. J-B Weld PlasticWeld set and cure color is Translucent Yellow..
STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI..
SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock