ReviewsAcoustic Sensor Module

Ambient Weather WS-100-F007PF Smart Home Weather Station WiFi Module w/ Pool & Spa Sensor

  • Includes WiFi module and (1) F00PF pool /spa sensor.
  • Easily connects to routers and smart devices using WAP, up to 80 feet open air/line of sight.
  • NIST time synchronization from Internet with Auto DST, and optional calibration of all measured parameters.
  • Module powered by 6V, 500mA adapter (included).
  • Sensor has ssolar panel with 4 x AAA battery back-up (not included).
Check Stock

GAOHOU 2 PCS DS18B20 Waterproof Digital Temperature Sensor with Adapter Module for Arduino

  • The kit contains a waterproof digital temperature sensor DS18B20 and a DS18B20 adapter module..
  • It can measure the temperature directly in the water. Compatible with Arduino UNO R3 / Mega2560..
  • With pull-up resistor on board, the adapter module can be connected directly to most microcontrollers and it is widely used in temperature monitoring for fish tanks, equipment, machinery, greenhouses..
  • You can plug the sensor onto the adapter module directory with screwing..
  • Package Includes: 2X DS18B20 temperature sensor + 2 X adapter modules..
Check Stock

Bolsen HB100 Microwave Doppler Radar Wireless Module Motion Sensor HB100, Microwave Motion Sensor, Motion Detector

  • 【Doppler Technique Microwave Induction】: The RCWL-0516 Microwave Radar Sensor Module is equipped with Doppler radar technology which is specially designed for detecting objects' motion. With high anti-jamming capability that it'll not be affected by wind, heat or other environmental factors..
  • 【RCWL-9196 Chip】: Equipped with the special signal processing chip RCWL-9196, the radar sensor module has the features of high sensitivity, long sensing distance(5-7M), high reliability, wide detection angle and wide power supply voltage range(4.0-28.0V)..
  • 【5 Ports for Varying Needs 】: 3V3(3V3 Power Output).
  • OUT(Control output. It will output high level when detect moving objects).
  • OUT will output low level all the time when the power is lower than 0.7V).
  • 【Penetration Testing Capability】: Compared with the traditional infrared induction PIR, this sensor module has the penetration detection ability..
  • 【Package Inlcudes】: 5x RCWL-0516 Microwave Radar Motion Sensor as pictured..
Check Stock

American Standard 215AA709.020 Exposed Trapway Cadet Touchless 2-Piece 1.28 GPF Single Flush Elongated Toilet (Seat Not Included), White

  • Promotes a cleaner bathroom and more hygienic experience.
  • Sensor module detects hand proximity and flushes toilet automatically.
  • To activate the touchless flush, simply position hand within 1-½ in. over sensor face for approximately two seconds to trigger a powerful flush.
  • Compact, 2-½ in. sensor module can be installed on wall within 3 feet of toilet or on top of toilet tank.
  • To activate the manual flush option, ensuring continual operation in the event batteries need replacing, simply push and hold the actuator button for approximately two seconds.
  • EverClean - Permanently maintains cleanliness of the surface.
  • Chair height, elongated bowl provides comfortable access and use.
  • Ultra-low consumption uses 20% less water than a regular toilet without sacrificing performance.
  • One-year battery life powered by 3AAA sensor and 4 AA control module batteries (included) is based upon an average of 12 flushes per day.
Check Stock

40T-Performance E85 Flex Fuel Sensor Mount/Bracket Bypass Module - Robust Mount For FULL FLOW from your E85 Flex Fuel Sensor to Fuel Rails - Solid 6061 Billet - 6AN and 8AN Fittings Included

  • The new 40T-Performance E85 Flex Fuel Sensor Bypass Module will let you install an e85 flex fuel sensor the right way! Get MORE fuel flow with this bypass module instead of restricting it when adding an e85 flex fuel sensor! *Does not include sensor.
  • Engineered in the USA & assembles on your E85 flex fuel sensor in minutes vs. piecing together a dozen fittings to make your own bypass saving you time! Cean look install, with O-rings at all connections for robust leak free operation and no messing with single use crush washers. Keep it simple and avoid the risk of leaky fuel in an engine bay.
  • Have a V6 or V8? Run it as a splitter with 6AN feed to each rail to get the benefit of full equalized fuel pressure & flow to each rail for maximum performance. 8AN feed and 6AN split can support up to 1000 HP on e85. Compatible with any sensor with tube length 95 mm x 9.5 mm diameter incl. GM 13577429 / 13577379, AC Delco 13507128, Continental, VDO & AEM 30-2200 30-2201 sensors.
  • Solid 6061 Billet Alum construction Includes 6AN & 8AN in/out fittings, 6AN plugs and a 6AN fitting to use the module as a splitter. Includes al....
Check Stock

Alinan 10pcs High Sensitivity Sound Microphone Sensor Detection Module for AVR PIC

  • Using infrared reflective sensor TCRT5000.
  • TCRT5000 infrared reflection sensor, detecting reflection distance, suitable for 1mm~25mm, comparator output, clean signal, good waveform, strong driving ability, over 15mA, with potentiometer adjustment sensitivity.
  • IR Infrared Obstacle Avoidance Sensor Module TCRT5000 Photoelectric Switch Barrier Line Track Sensor Module for Smart Car w/Cable 3.3V-5V.
  • Easily Installation:Design with bolt holes for easy installation.Use wide voltage LM393 comparator,With potentiometer to adjust sensitivity.
  • Output form: digital switching output (0 and 1),Comparator output, clean signal, good waveform, strong drive capability, over 15mA.
Check Stock

ACEIRMC 4pcs Si7021 GY-21 SHT21 HTU21 Digital Humidity Temperature Sensor Module Replace SHT11 SHT15

  • The humidity and temperature sensor board that carries a digital SHT21 humidity and temperature sensor from Sensirion..
  • Si7021 GY-21 Module Industrial High Precision Humidity Sensor I2C IIC Interface Module For Arduino Low Power CMOS IC Module.
  • It has a 4-pin interface that can communicate directly with the analog pins.
  • It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/temperature sensors in 3x3 mm DFN-6 packages, featuring precision sensing over a wider range and lower power consumption..
  • The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms..
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

ACEIRMC VL6180 VL6180X Range Finder Optical Ranging Light Sensor Module Gesture Recognition Sensor I2C Interface 3.3V 5V Emitter Ambient Light Sensor for Arduino I2C (4)

  • VL6180 VL6180X Range Finder Optical Ranging Sensor Module Gesture Recognition Sensor.
  • VL6180 is a time-of-flight ranging sensor. The sensor contains a very small laser source and a matching sensor..
  • I2C interface for device control and data, two programmable GPIOs..
  • VL6180X can detect the "time of flight" or the time required for the laser to recover the sensor to calculate the distance..
  • VL6180 VL6180X Range Finder Optical Ranging Sensor Module for Arduino I2C Interface 3.3V 5V gesture recognition.
Check Stock

DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

  • Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
  • Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
  • Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
  • Measure the temperature directly in water or soil.
  • DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.
Check Stock

Getting Started with the micro:bit: Coding and Making with the BBC's Open Development Board (Make)

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock