ReviewsAcrylic Engraving

ATOMSTACK A5 Pro 40W Laser Engraver Master, Wood Engraving Machine, Eye Protection Fixed-Focus CNC, Desktop DIY Laser Engraving Cutting Machine, Cut Engraver for Metal Wood Vinyl Leather, 410x400mm

★【A5 Pro 40W Laser Engraving, New Eye Protection Design】This laser protective case plays a very good role in protecting your eyes, filtering 97% of UV rays, you and those around you don't need to wear goggles. You can also watch laser engraving. Reduce the cost of goggles and the inconvenience of wearing goggles. Once you sculpt something, you can't put it down..
★【Strong and easy-to-install structure design】The all-metal structure design makes the machine more sturdy and durable, while improving the accuracy of engraving. The entire structure is designed for quick installation and can be installed within 10-20 minutes. Accurate graduated spool, large area is ideal for engraving any pattern, laser engraving machine beginners can use..
★ 【Ultra-fine compression, upgraded high-performance fixed-focus laser】Engraving can be done without adjusting the focal length.
the laser power is 5W-5.5W, the focal length of the ultra-fine laser is reduced to 0.23mm^2, and the high-density laser can easily cut 12mm thick wood , black acrylic.
can directly engrave smooth stainless steel metal, ceramic..
★【Wide Compatibility and Wide Use】The machine can be compatible with various mature engraving software, such as LaserGRBL (Free), LightBurn, and a....

Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

...y: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, support macbook system (LightBurn)..

Check Stock

MUNBYN Laser Engraver, 10W Laser Output Cutter and Metal Engraver with Rotary Attachment, Laser Engraving Machine for Cylindrical (Metal Bottles), Wood, Leather, Plates etc

...t up to 20mm of light wood(plywood) or 15mm of black acrylic while others are 11mm of wood and 8mm acrylic..
[Strong Cutting Ability with One Pass] MUNBYN laser cutter with powerful 10W laser output power enables it easily to cut 12mm wood or 7mm acrylic in one pass time. [The laser cutter’s machine power is 50W].
[Engraving Artwork Nearly Same as Original Image]: MUNBYN laser engraver’s spot is 0.06mm, reaching extremely fine engraving lines of 0.06mm. Plus 0.01mm accuracy means that the engraving lines will be straight like a ruler. This means the effect of your engraving arts are almost the same as the original drawings, more vivid..
[Free Premade Designs Files] Considering that customers will need of premade design, we specially request our loyal fans for their design files and consult a large number of data libraries to organize and classify them into a system premade design files library. You can find them in our help center, if you don't know how to find them and download them, please contact me anytime..
[Longer Lifetimes Use-More Than 3 Years] The working time of MUNBYN laser head is 28,000 hours, which is about 41% higher than similar laser cutter. Even in the case of continuous work every day, it could be used for more than 3 years -28000/....

Check Stock

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

...mperature smoke generated during laser operation through the unique air duct built into the laser module, which helps to engrave more delicate models. You can use the roller to engrave objects with diameters from 2mm-150mm, such as goblets, skateboards, pencils, etc.
【Stability and Efficiency】The Atezr P10 laser engraving machine is made of high-density aluminum alloy. It can ensure engraving accuracy and stability even at a high speed of 24,800mm/min, and save nearly 40%-80% of working time. The engraving area of Atezr P10 engraving machine is increased to 430mm*430mm, which can engrave larger materials.
【Powerful Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
【Multiple Connection Modes】ATZER laser cutting machine has 4 connection modes. You can not only connect to PC, mobile phone/tablet APP, but also connect to touch screen and WLAN. You can download APP from App Store/Google Play Store and use your mobile ....

Check Stock

Sports Sponsorship: Principles and Practices

TEAM PHOTO PLAQUE: This Custom Engraved Photo Frame Is 10" x 8" And Includes A Clear Acrylic Photo Cover To Complete Your Award..
INSERT YOUR OWN PHOTO: Add Your Very Own Photo Upon Delivery. Please See Product Photos For Additional Instructions On How To Insert Your Photo..
PERSONALIZED PHOTO PLAQUE: Customize Now With Your Own Text Engraving! Our Engraving Experts Personalize Each Wood Plaque With Care. Each Custom Photo Frame Plaque Takes Up To 3 Lines of Engraving..
HIGH QUALITY DESIGN: These Vertical Photo Plaques Are Perfect For Custom Photo Plaques, Photo Engraved Plaques, Photo Holder Plaques, Sports Photo Plaques and More..

Check Stock

ATOMSTACK X30 PRO Laser Engraver, 160W DIY CNC Laser Engraving Cutting Machine, 6-core Diode 33W Laser Power for Wood, Vinyl and Metal, Offline Engraving, Built-in F30 Pro Upgraded Air Assist System

【Ultra-high Power】the World's First 33W Laser power output laser engraving machine. The latest 6*6W laser coupling technology, can cut 20mm wood board, 10mm black acrylic board at one pass, and even can cut 0.1mm stainless steel sheet. High density laser multiple times work can easily cut 25mm thick wood board, 30mm thick black acrylic.
can directly engrave mirror stainless steel metal, ceramics, opaque glass and other materials..
【High efficiency】Compared with 10W laser engraving machine, X30 Pro has 200% higher cutting speed and 150% higher cutting depth. Compared with 20W laser engraving machine, X30 Pro has 50% higher cutting speed and 25% higher cutting depth..
【Equipped with F30 Pro upgraded air-assist kit】the cutting capacity is greatly improved while the cutting accuracy and cutting quality can also be optimized to a great extent..
【Newly upgraded Atomstack self-research 32-bit motherboard】built-in 256-bit color scale map, so that the engraving works more fine, higher contrast, so that your engraving is not just black..

Check Stock

SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm

Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work..
Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through..
High Quality Full-Metal Structure：SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness..
Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object..
Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..

Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

...r Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
acrylic, plastic, etc. Can be directly engraved without any preprocessing..
Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engraving more efficient.

Check Stock

Honeycomb Laser Bed 37.4\x 19.68\x 0.87\

✅✅✅【Soulmate for laser engraver】Nivill honeycomb working table is indispensable part of laser cutting and engraving machines. It helps to extend the life of your laser engraver desktop, make your engravings more precise and improve the quality of your engravings..
✅✅✅【Durable Material & Fast Heat Dissipation】The honeycomb panel is made of steel, making it more stable, durable, and rust-proof. The flat and smooth honeycomb hole design accelerates the emission of smoke so that materials such as wood are not easily blackened by smoke, and the engraving effect is better..
✅✅✅【Multiple Protection】 In laser cutting operation, honeycomb plate is used to prevent laser reflections from damaging the laser head during the cutting process and prolong the service life of the laser. The honeycomb workbench set is equipped with an aluminum panel, which can protect your desk from laser damage. Also come with 4 corner protectors to prevent your hands from being in any potential danger..
✅✅✅【High-Efficiency Engraving & Quick Measurement】 Honeycomb panel can cut wood, acrylic, and other materials, the wood edges are neat and clean, and the 9mm aperture size can be more effectively arranged during the engraving process Smoke, helps t....

Check Stock

50 Pack 5 x 7 Inch Acrylic Sheets Clear Acrylic Sign Blank 1 mm Thick Acrylic Panel for Picture Frame Glass Replacement, Art Crafts Projects, Painting, Acrylic Signs for Wedding Festival Party Office

Anti Scratch and Anti Shatter: this acrylic plastic sheet is covered with a protective film on both sides to avoid scratches during transportation or before use, just remove the protective film when using.
Engraving or DIY: you can choose to cut the frame acrylic sheet with an engraving machine or a utility knife to cut it into the shape and size you want, the operation is very simple, and you can DIY according to your needs.
Sufficient Quantity: there are a total of 50 pieces of clear acrylic boards (approx. 5 x 7 inches), which are enough to meet your handmade DIY needs, you can also share with your family and friends to experience the fun of DIY.

Check Stock

Longer RAY5 Laser Engraver 130W, Higher Accuracy Laser Engraver 20W Output Power, 3.5"Touch Screen APP Offline Control, DIY Engraver Tool for Metal/Glass/Wood, Cutting Area 14.7"x14.7"

...r enhancement technology and enhance the cutting capacity of this machine. It can cut 0.59"/15mm pine wood and 0.31"/8mm acrylic in one pass, 25mm wood and 35mm acrylic multiple passes, and cut 0.002"/0.05mm stainless steel..
【More detailed and Multi-Color Engraving】Longer RAY5 20W laser engraver with a newly upgraded 32 bits chipsets motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieves a finer engraving result and a higher contrast effect. And an air-assisted interface is reserved, which can be easily matched with various air pumps, and more clean surfaces..
【3.5" color Touchscreen & 4 Connection Methods】The Longer RAY5 laser cutter has a built-in 3.5-inch color touchscreen with a user-friendly interface. You can directly operate the machine through the touchscreen, such as checking the engraving progress, adjusting the engraving speed, or other operations. Particularly totally User-Friendly Laser Engraver, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Wi-Fi Connection.

Check Stock