ReviewsAdapters And Fittings

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

SharkBite U256LFCP 3/4 Inch 90 Degree Elbow Push to Connect Pipe Fitting, 10 count, Brass

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit connectors.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines.
  • PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: All SharkBite valves, joints, and adapters are manufactured and tested in the USA.
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

DAYUAN Professional Petrol Engine Compression Tester Kit Set for Automotives and Motorcycles

  • Adapters for a wide number of vehicles (spark plug types/depths).
  • Includes 2 rubber cones ends for quick check (no need to thread into head).
  • 3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa.
  • Fittings: M10, M12, M14, M18 (Male, With "O" Ring).
  • Includes 14mm and 18mm spark plug adapters.
Check Stock

BETOOLL Pro Fuel Injection Pressure Tester Kit Gauge 0-140 PSI

  • Dual Dial For Accurate Reading, With A 140 PSI /10 Bar Scale.
  • Deluxe Manometer Fuel Injection Pressure Tester Gauge Kit.
  • Set comes in a specially designed molded case to make storage easy and organized..
  • A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters..
  • The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!.
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

10Pcs Propane Tank Gasket and 10Pcs O-Rings for All Soft Nose P.O.L. Fittings, Soft Rubber Leakage-Proof Sealing, Fit for Propane Gas Adapters, Connectors, Valves, Regulators, Accessories and More

  • [WHAT YOU GET] You will get 10 pieces of Propane Tank Gasket and 10 pieces of O-Rings for All Soft Nose P.O.L. Fittings..
  • [MONEY-SAVING PROPANE ACCESSORIES] - Propane leakage preventing washers can avoid thread sealing leakage. If the seal ring worn, aged or compressed, there would cause a dangerous gas leak. Just change to new washers, there would be no more gas leak. Save much money on buying new gears and we can have a safe cooking or grill with our old equipment..
  • [Propane tank Gaskets] The Propane tank Gaskets can prevent leakage on propane tank connectors, valves, Regulators, adapters, fittings. Outer Diameter 0.716inch(18.2mm), inner diameter 0.394inch(10mm), and Thickness 0.12inch(3.0mm). Ensure replacement O-rings are in same size with your stock gasket..
  • [SOFT NOSE O-RING] - Replacement Part for Soft Nose O-Ring on Propane P.O.L. Fittings. Suitable for propane adapters, pipe connectors, elbow sealing material, cold and hot water pressure. Approximate size OD 0.587 inch or 14.9mm, ID 0.4 Inch or 10.1 mm, Thickness 0.1 inch 2.5 mm..
  • [DURABLE AND STURDY] Made of high-quality Soft Rubber, all the seal rings are durable and sturdy for long time usage..
Check Stock

INTEX 1.25 to 1.5 Type B Hose Adapters for Pumps & Saltwater System | Set of 2

  • Coverts INTEX pools with 1.25" fittings to 1.5" fittings.
  • Needed when upgrading a 1000 GPH INTEX pump or smaller, to a 1500 GPH INTEX pump or larger.
  • Generally two adapters are needed to connect a larger pump.
Check Stock

ATP Professional Petrol Gas Engine Cylinder Compression Tester Gauge Kit Auto Tool

  • 2 rubber cones ends for quick check (no need to thread into head).
  • 3″ Gauge has dual color scale with 0-300 PSI, 0-20 kPa.
  • Fittings: M10, M12, M14, M18 (Male, With “O” Ring), Includes 14mm and 18mm spark plug adapters.
  • Gauge will hold pressure values and has quick push button release valve.
  • Comes with 1/2″ diameter x 18″ extension hose, straight and angled fittings, rubberized gauge protector and a blow mold case..
Check Stock