ReviewsAdd A Drain To A Cooler

Honoson 3 Sets Cooler Drain Plug Cooler Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.9 cm Shaft Length, White

Cooler size: the drain cap is 3.9 inches/ 10 cm in total length, and the gasket is 0.8 inch/ 2 cm in diameter and 1.1 inch/ 2.9 cm shaft length, and the nut is 1.3 inches/ 3.2 cm in total length.
Please check whether this product is suitable for your cooler before purchasing.
Note: please confirm whether the shaft length is suitable before purchasing.
Quality material: the cooler plug is made of quality plastic material, which is odorless, safe and reliable.
It is dirt resistant and can keep the drain hole of your cooler clean.
Leak-proof design: the cooler drain plug is equipped with a leak-proof gasket, which seals tight to prevent leakage and the tethered cap helps to avoid cap loss.
Easy to install: the replacement triple snap drain plug is simple to use, with no other tools required.
You just need to pass the plug through the cooler and tighten it with a nut and a washer.
You will get: there are 3 pieces of drain caps, 3 pieces of nuts and 3 pieces of gaskets in the package.
The size is proper and the quantity is enough for you and your family to use.

Check Stock

PROSOCOOL Cooler Drain Plug Replacement for Coleman Xtreme Coolers Ice Chest 50, 58 and 82 Qt -1.5" Shaft Length Drain Plug Kit

Compatible with 50, 58 and 82 Quart Coleman Xtreme Coolers.Replacement Plug are compatible with some Coleman 120 QT models, Please Measure Your Original Size Before Purchasing. The Drain Plug Assembly including: Cap, Main Shaft, and Rubber Gasket..
Double check your cooler's drain plug hole size and cooler wall thickness. This is NOT a Universal Drain Plug for Coleman Coolers as other sizes are available..
Replaces Part Number: 5010005241, Fit Model 6020. Shaft length: 1-1/2". Shaft diameter: 3/4".The Drain Spouts are vulnerable to damage, and when they are damaged, your cooler leaks, not good. This solves the problem much more cheaply than buying a new cooler..
If you can accept a small modification to your freezer or this plug, it will be compatible with your.
After Modification, Compatible with 60qt ,/Gott 80 qt and more.The drain plug length was perfect. The "male" part will easily fit inside the original opening inside the cooler but to screw on the plug /ring on the outside you will need to shave about 1/8th of an inch around the hole and it will fit ....

Check Stock

Happygrill Large 80 Quart Cooler Cart, Outdoor Cooling Bin with Wheels, Patio Rolling Ice Chest Cooler for Beer Beverage

Large 80 Quart Cooler Cart - This Red Cooler Cart Will Add Beauty To Your Patio, And It Also Very Functional. It Will Be A Perfect Tool To Cool Your Drinks, Such As Beer, Beverage And Juicy..
Convenient to Use - Features Four Wheels For This Cooler Cart, You Can Move It Easily, Especially For Outdoor Using..
Keep Beer Cool - Featuring Refrigeration Insulation, This Stainless Cooler Cart Will Keep Your Drinks Cool For A Longer Duration, Which Can Reach 72 Hours..
Top Lids Design - This Cooler Cart Includes Two Top Lids And Both Of Them Can Open, So You Can Take The Drinks Out At Each Side..
Easy For Daily Use - A Easy-Fill Lift Off Top For Convenient Adding And Taking Out Drinks Bottles. Drains Easily With Twist Off Drain Plug. Simple Assemble Need..

Check Stock

Igloo Replacement Threaded Drain Plug

Fits Igloo coolers with an approx 1 inch outer diameter drain plug hole and approx 1-1/16 inch cooler wall thickness..
Threaded cap seals tight to prevent leaks. Plastic tether helps prevent cap loss..
DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other....

Check Stock

Cooler Drain Plug Replacement Compatible with Yeti's Line of Roadie and Tank Coolers and RTIC Coolers Leak-Proof Accessories

【Compatibility】--- Cooler Drain plug fit for Compatible with Yeti, Roadie Coolers, and TANK Ice Buckets and RTIC coolers( This is Non-Original Aftermarket Parts ).
【Improved Design】 ---Replacement drain plugs improved finger knob design allows for much easier finger leverage to open and close the drain.It's designed to drain when partially open without having to fully remove the plug.
【Good Replacement 】---Drain plugs with leak-proof design replace your old or broken cooler drain plugs perfectly..
【Easy Use】---Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
【Premium Quality】--- Replacement drain plugs is is made of durable material, easy flowing, rugged..

Check Stock

Igloo Cooler Replacement Standard Triple Snap Drain Plug (2pk)

Approx 13/16" in diameter at the threaded portion.
Triple snap (push-to-close) tethered cap. Includes: 2 drain plugs with push-to-close cap and nut with gasket & washer..
Easy installation: Place plug through cooler, screw down gasketed nut.
Triple-snap cap seals tight to prevent leaks, tethered cap helps prevent cap loss.
DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other sizes available..

Check Stock

Cooler Drain Plugs Compatible with Yeti's Line of Roadie ,Tundra and Tank Coolers and RTIC Coolers Leak-Proof Accessories Pack of 2

❤Compatibility:Black Cooler Drain plug Compatible with Yeti, Roadie,Tundra Coolers, and TANK Ice Buckets and RTIC coolers.(This is Non-Original Aftermarket Parts).
❤Improved Design :Replacement drain plugs improved finger knob design allows for much easier finger leverage to open and close the drain.It's designed to drain when partially open without having to fully remove the plug.
❤Good Replacement :Drain plugs with leak-proof design replace your old or broken cooler drain plugs perfectly..
❤Easy Use:-Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
❤Premium Quality:Replacement drain plugs is is made of durable material, easy flowing, rugged..

Check Stock

ROLLMOSS Cooler Drain Plug for Yeti Cooler Plug Replacement Accessories for Yeti, Cooler Wheels Compatible with Yeti's Line of Roadie, Tundra, and Tank Coolers Fit ORCA Coolers (Red, 2 Pack)

【Compatibility】Ergonomically Improved Drain plug, Perfectly fit for Yeti, Roadie, Tundra Coolers, and TANK Ice Buckets and RTIC coolers. It DRASTICALLY Improves the Ability to Easily Open Your Cooler Drain in All Kinds of Cold, Wet or Slippery Conditions..
【Very Convenient Design】Improved finger knob design which can allows for much easier finger leverage to open and close the drain. So you only need to partially open the drain plug to drain without having to fully remove the plug..
【Durable Construction】The Leak-Proof, Rugged Drain Plugs Allow Your Cooler to Drain While Only Partially Open. An Ergonomically Improved Twist Drain Plug Compatible With Yeti Line of Roadie, Tundra, and TANK Coolers..
【Easy Use】When the drain plug is in a partially opened state, the drain plug drains the cooling water. Tightening the leak-proof drain plug helps prevent the cooling water from being lost from the cooler..
【Customer service】Our aim is to provide Top Level Customer Service, and we are always standing by to solve any of your problems. If you have any question, please....

Check Stock

Cooler Replacement Parts Kit, Ice Chest Plastic Hinges, Latch Posts, and Screws, Threaded, and Triple-Snap Drain Plug. The best option for repairing and replacing multiple cooler parts.

【PACK ALL PARTS】Cooler repair kit, Contain 4 hinges, 2 Cooler Latch & Posts, 22 stainless steel screws. 1 threaded drain plug assembly, 1 drain plug assembly snap, 1 reusable packaging..
【COMPATIBLE DESIGN】The hinges and latches included in the kit are compatible with the current hinges and latches of the same shape as the original, Threaded Cooler Drain Plug and Triple Snap Drain Plug..
【RELIABLE AND DURABLE】The Parts Kit for Ice Chests, using high-quality ABS material, strong and durable, is your first choice for replacement parts and spare parts..
【QUICK INSTALLATION】You can easily replace the damaged parts in the freezer and ice house cooler. The kit contains the parts you need to replace, which are convenient and quick, and can also be stored as a spare..
【QUALITY AFTERSALES】With fast response and high-quality customer service, we are committed to providing each customer with a practical Cooler Replacement Parts Kit. If you have any questions, please feel free to contact us..

Check Stock

Cooler Replacement Parts Kit, Ice Chest Plastic Hinges, Threaded and Triple-Snap Drain Plug, Latches and Stainless Steel Screws Combo, Plastic Cooler Replacement Set

: Cooler replacement parts help to replace the broken parts of your ice chest and Igloo cooler.It’s easy to replace the cooler parts. The assembly instruction is included to make you understand the installation..
: Cooler replacement parts contain of threaded drain plug, triple drain plug, latch posts and hinges. The hinges and the latches are interchangeable with all current and original style Igloo cooler hinges and latches..
: Tough plastic material provide better using experience, the Igloo cooler parts are rugged and durable for long cooler life.
: 1 drain plug assembly-snap(fits Igloo 25-70 quart coolers). 1 drain plug assembly-threaded(fits Igloo 50-165 quart coolers). 4 hinges,16 stainless steel screws(fits Igloo 25-165 quart coolers). 2 latches, 6 stainless steel screws,1 assembly instruction(fits Igloo 50-165 quart coolers)..
: Please note that we are always here to help you. Please contact us through Amazon if you have any questions or inquiries..

Check Stock

Cooler Replacement Parts Kit for Coleman,Ice Chest Plastic Hinges,Cooler Standard Drain Plug Assembly and Stainless Steel Screws Sets Compatible with Coleman Coolers（1" Shaft Length）

【Fit for】Cooler replacement parts kit for use on the following Coleman Cooler models:5227, 5235, 5239, 5240, 5241, 5245, 5248, 5254,5255, 5256, 5262, 5264, 5265, 5269, 5272, 5274,5276, 5283, 5284, 5286, 5294, 5299, 5296, 5299,5848, 5850, 5894, 5896, 6262, 6270,part number: R5214D607G..
【Easy to Install】You can easily replace the damaged coolers parts in the freezer and ice house cooler. which are convenient and quick, without busy purchases, and can also be stored for spare..
【Package Include】1 cooler standard drain plug assembly,2 hinges,8 stainless steel screws,meet your multi needs..
【Uality Material】Cooler sets is made of quality plastic material, which is odorless, non-toxic, safe and reliable.
It is dirt-resistant and can keep the drain hole of your cooler clean..
【Leak-proof design】The cooler drain plug is equipped with a leak-proof gasket, which seals tight to prevent leakage and the tethered cap helps prevent cap loss..

Check Stock