ReviewsAdhesive Film For 3d Printing

Phrozen Sonic Mighty 4K Large LCD Resin 3D Printer, 9.3' Mono LCD Screen & 22cm Z-axis, Matrix LED UV Light Tech, L7.9 x W4.9 x H8.7 Printing Volume, for Large 3D Models, Miniatures, or Tabletops

【Bigger Printing Area & A Taller & Stronger Z-axis】Sonic Mighty 4K provides a 9.3” printing area that empowers makers to print bigger and larger quantities in a single batch. Phrozen Sonic Mighty 4K comes with a 22 cm Z-axis and dual-linear rails, allowing creators to produce tall and spectacular tabletops, such as gigantic dragons or large ogres. The stronger Z-axis also prevents the 3D printer from wobbling, which provides the user with a stable and reliable printing process..
【High 4K Resolution】With its large printing capability, Sonic Mighty 4K doesn’t compromise its printing precision. Monochrome LCD printing also allows the 3D printer to print up to 4 times faster than traditional 3D printers. Rapid prototyping greatly improves printing efficiency and increases efficiency by printing out each layer in only two seconds. In addition, each Phrozen 3D printer LCD is guaranteed to have 2000 working hours while a free 3-month warranty is also offered..
【Quality Prints and Consistent Success】Phrozen Sonic Mighty 4K’s matrix light source consists of 54 UV LED lights with uniform light emission.
this ensures superior print results and accurate printing size. The set screws on the sides of the building plate also ensure longer-lasting le....

Check Stock

ANYCUBIC Photon Mono 4K 3D Printer, 6.23'' Monochrome Screen Upgraded LCD SLA UV Resin 3D Printers with Fast & Precise Printing and Large Printing Size 5.20''X3.14''X6.50''

[High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X faster than original 2k printer..
[4K High Resolution & Higher Accuracy]: This newly high resolution 3840×2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface.
and MONO 4K uses a high contrast ratio more than 350:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat..
[6.23″ Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23″ screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5×5.2×3.1in at a time, which offers your creations more possibilities..
[Adjustable Power & Universal Compatibility]: With 30%-100% l....

Check Stock

Phrozen Sonic Mini 4K LCD Resin 3D Printer, Matrix LED UV Light Tech, Monochrome/Mono LCD Screen, Longer Working Hours, for Jewelry-Making and Miniatures, Printing Volume: L5.2 x W2.9 x H5.1

【Ultra 4K Printing Precision】 3840 x 2160 Ultra-high-definition With 4K resolution, Sonic Mini 4K prints out all your models at 35µm with 722 PPI, the highest PPI ever! 3D printing enthusiasts are empowered to print out extremely detailed miniatures and small tabletops with the highest precision level. Sonic Mini 4K is also the ideal choice for jewelry makers to create intricate jewelry pieces. Sonic Mini 4K gives a boost to all the creators out there..
【Mono-LCD Screen】Sonic Mini 4K has a 6.1″ Monochrome LCD screen, which allows the 3D printer to print up to 4 times faster than traditional 3D printers. Rapid prototyping greatly improves printing efficiency and increases efficiency by printing out each layer in only two seconds. In addition, each Phrozen 3D printer LCD is guaranteed to have 2000 working hours while a free 3-month warranty is also offered..
【Ample Printing Volume】 Just because you’re printing all your models with ultra-high-resolution, doesn’t mean that the size of your prints has to be sacrificed. Sonic Mini 4K has a decent chamber size of 5.2″ x 2.9″ x 5.1″, which provides you with sufficient area to print out most 3D models. Sonic Mini 4K is also compact & lightweight, easy to store, and fits in a variety of ....

Check Stock

R3D Mini FDM 3D Printers,Premium Quality & Precision with Sturdy 1-Piece All-Metal Enclosed Housing,Heated Removable Magnetic Build Plate Stable XYZ Construction and Resume Printing,SD & USB Print

【Ultra 4K Printing Precision】 3840 x 2160 Ultra-high-definition With 4K resolution, Sonic Mini 4K prints out all your models at 35µm with 722....
【Mono-LCD Screen】Sonic Mini 4K has a 6.1" Monochrome LCD screen, which allows the 3D printer to print up to 4 times faster than traditional 3D....
【Ample Printing Volume】 Just because you’re printing all your models with ultra-high-resolution, doesn’t mean that the size of your prints has....
【Multi-Resin Compatibility】Sonic Mini 4K is compatible with the majority of 3D printing resin on the market. For the ideal printing experience, we....
【User Satisfaction Guaranteed】 Phrozen provides a one-year warranty on all 3D printers (excluding consumable parts such as LCD screen & FEP film)....

Check Stock

3M 9425/TRL0572 Scotch 9425 Removable Repositionable Tape: 1/2" x 72 yd, Translucent

3M 9425 Removable Repositionable Tape is a translucent UPVC film differentially coated with a removable/repositionable, medium tack, adhesive on one side (back/liner side) and a permanent, high tack, adhesive on the other (face/exposed side). Industries 3M 9425 is used in includes electronics.
The medium-tack adhesive allows removal from many foils and films without adhesive residue. In many cases, the tape can be reused numerous times. The user should perform specific tests to determine the product’s suitability for the particular application..
The UPVC film carrier on the tape provides differential stability which offers improved handling for laminating and die-cutting. 3M 9425 is used for repositioning or multiple openings and closings and works on a variety of substrates or materials for temporary adhering, affixing, mounting, holding, attaching, and positioning of lightweight materials such as paper, photographic paper, plastics, films, foams, and cardboard..
Carrier/Backing: unplasticized polyvinyl chloride (UPVC) film. Adhesive: acrylic. Release Liner: 58# polycoated Kraft paper..
Thickness: 5.8 mils (carrier, adhesive) 4.4 ....

Check Stock

Polarized Film Sheets 2 PCS 7.8x5.9in/ 20x15cm Adhesive Polarizer Linear Polarizing Filter for Screen Educational Physics

Polarization: Linear, Size: 7.8x5.9in/ 20x15cm, Thickness: 0.22mm..
Polarizing film with adhesive: Both sides have protective film, one side is adhesive. Before you use it, please peel off film..
Wide Application: Used for Motorcycle dashboard display, projector screen, electronic watch screen..
How to use: After the polarizer is cleaned of dust, adjust the angle, cut it into the corresponding shape, and stick it on for use..
Package: 2 x Polarizing film sheet. Note: Not suitable for 3d printer..

Check Stock

Polarized Film Sheets 2 PCS 7.8x11.8inches/20x30cm Adhesive Polarizer Linear Polarizing Filter for Screen Educational Physics

Polarization: Linear, Size: 7.8x11.8 inches/ 20x30cm, Thickness: 0.19mm..
Polarizing film with adhesive: Both sides have protective film, one side is adhesive. Before you use it, please peel off film..
Wide Application: Used for Motorcycle dashboard display, small size screen, electronic watch screen..
How to use: After the polarizer is cleaned of dust, adjust the angle, cut it into the corresponding shape, and stick it on for use..
Package: 2 x Polarizing film sheet.Not suitable for 3d printer..

Check Stock

FEPITO 6 Rolls Heat Tape for Heat Press Resistant Temperature Polyimide Tape,Ideal Solution for Heat Transfer,Sublimation,Heat Vinyl Press,3D Printing Electronics,Soldering,Circuit Board and More

EXCELLENT THERMAL DURABILITY:Heat resistant tape is a polyester film tape with a high temperature resistant adhesive,and the long-term temperature is -73°C (-99°F) to 260°C(500°F),the short temperature is 662 ℉(350℃)..
GOOD COMPREHENSIVE PROPERTIES:Not easy to break while peeling,and the tape also offers excellent resistance to moisture, acids,and chemicals.Works well in Heat press,3D Printing, Soldering, T shirt application or other Thermal transfer printing..
LEAVES NO RESIDUES:Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape..
WIDELY USE:The polyimide tape has excellent electrical properties, the breakdown voltage is above 4500V.The width of the tape is 2/5.

Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..

Check Stock

KOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 8.9‘’ Resin 3D Printer, High Light Transmittance Protective Film for Elegoo Saturn/Saturn S/Mono X194x122x0.33mm

The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank through the tempered film..
With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also prevent the resin from leaking and polluting the screen from the damage of the release film..
Size: 194x122x0.33mm, perfect for 8.9-inch monochrome screens, compatible with ELEGOO Saturn, Saturn S, Mono X, Creality Halot Lite and other resin 3D printers with 8.9-inch screens..
Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective film and install the tempered film on the monochrome screen. Use a plastic scraper to avoid air bubbles. After the installation is completed, please use cleaning fluid and The non-woven fabric wipes the tempered film clean..
Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after installing the tempered film..

Check Stock

PEI Sheet Magnetic Bed Flexible Spring Steel Platform with 3M Adhesive, 220x220mm（8.66 8.66inch) for Anet A8, A6, Robo R2, Wanhao Duplicator6, Duplicator i3 Monoprice Maker 3D Printers.

【Quality Materials】: The PEI magnetic build plate is 3-Layer Materials . The flexible spring steel platform in the middle, covered with smooth PEI surface on it, and authentic 3M Magnetic Adhesive at the bottom are stable and durable.The maximum temperature for printing is 130℃ on the bed. Don't worry about the prints curling with a 60℃ bed temperature..
【Proven Solution】: No glue, No tape, PEI printed bed with authentic 3M has strong adhesion.
No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new..
【Reuse For Multiple Prints】: Prints easily moved if bend the Magnetic plate when the heated bed reaches room temperature. then just wipe the surface with isopropyl alcohol and it can be reused as new..
【Practical Features】: Flexible, removable, high strength and heat resistance, good adhesion to PLA and ABS,220x220mm PEI sheet size is suitable for Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus Monoprice Maker and similar size 3D printers..
【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a....

Check Stock