ReviewsAdhesive Tie Mount

Gorgeri Adjustable Dash Mount Compass Navigation Hiking Direction Pointing Guide Ball for Marine Boat Truck Auto Car Outdoor

【Portable Dash Mount Compass】Portable stand compass with adhesive tape on the bottom for car truck dashboard mount.
【Outstanding Function】With the pointer pointing the dial, high precision and easy to read.
【Quality Plastic Material 】It is made of high quality weathering resistant and durable plastic, high reliability.
【Compact Design】Compact design, small enough not to block your sight while you driving or navigating.
【Widely Fitment】Suitable for your car, truck or boat, also suitable for cycling, hiking or other outdoor activities.

Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....

Check Stock

VANTRUE N1 Pro, X4, X1, X1 Pro, X2, R2 Adhesive Dash Cam Windshield Mount

Adhesive dash cam windshield mount for a second vehicle or to replace a damaged or lost mount. Works well for Vantrue N1 Pro,X4, X1, X1 Pro dash cam..
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera.
The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your window.
Package included: 1 windshield adhesive mount, 1 Sticky Adhesive Tape.

Check Stock

6 Pack Adhesives for Suction Cup Mount, AZXYI 53mm(2.09inch) Sticky Adhesive Replacement Kit, Compatible with Car Dashboard Pad Mounting Disk, GPS Dash Cam Suction Cup Mount and Socket Mount

【6Pcs Adhesives Replacement for Suction Cup Mount 】AZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 53mm,2.09") , which can help to fix your Garmin GPS mount, Phone mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Try AZXYI super adhesive for lock sucker. Never fall again!.
【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard or windshield..
【A Great Addition for Wireless Charger】The strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage..
【Very High Bond】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various surfaces wherever you want, like car dashboard, Car Dash, Windshield & Desktop..

Check Stock

Vantrue N2 Pro N2 T2 R3 X3 Dash Cam Micro USB Port Car Windshield Adhesive Mount

Adhesive dash cam windshield mount for a second vehicle or to replace a damaged or lost mount. Works well for Vantrue N2 Pro, N2, X3, T2, R3 dash cam..
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera.
The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your....
Package included: 1 windshield adhesive mount, 1 Sticky Adhesive Tape..

Check Stock

Sticky Adhesive Replacement for Windshield Camera Holder, AZXYI 6pcs 2.76''(70mm) VHB Circle Double-Sided Adhesive Tapes for Dashboard Suction Cup Mount, Mounting Disk Pads, Dash Cam/GPS/Sucker Holder

【Strong Sticky Adhesive】These extra strong both side clear adhesion pads' stickiness is 40% stronger than ordinary adhesive. The heat resistant performance of these circle adhesive double-sided mounting adhesive tapes for dash cam mount reaches 120°C+, you can use it without worry in hot Summer. Easy to fix on your car phone socket base, or heavy duty dashboard mount base, you can drive uber, truck, vehicle security in bumpy roads..
【6Pcs Clear Adhesives Replacement】We offer 6 Pcs round clear sticky adhesive pads(Diameter: 70mm, 2.75") for attaching dashboard pad mounting disk to your car dashboard . You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup..
【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market..
【Easy to Install】Provided rounded rectangle raised label to easily p....

Check Stock

Sticky Adhesive for Dash Cam Suction Cup Mount, VOLPORT 90mm 3M Circle Heat Resistant Double Sided Extra Strong Mounting Tape Pad Replacement for Car Boat Dashboard Windshield Camera GPS Sucker Holder

【Designed for Suction Cup items】Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need..
【Genuine 3M Sticky Adhesive Circles 】These 3M VHB very high bond strength double-side adhesive backing stickers for dash cam mount back have high temperature(120℃+) resistance performance, even in Texas, you can use it no worry in hot summer.Stickiness is 40% stronger than ordinary glue, make sucker with super strong suction force. The tape is waterproof, fit for DSLR sports action Cameras, sink caddy, iPad, widely install your DSLR on window, mirror, dashboard even exterior of auto or truck..
【Easy to Install】The adhesion sticker replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive, clean the the surface with alcohol pack before using the new adhesive rounds, after surface is dried, p....

Check Stock

Vantrue N2 Pro N2 T2 R3 X3 Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module for Windows and Mac

Vantrue N2 Pro / N2 / T2 / R3 / X3 Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module(for Windows and Mac).
With this gps mount, you can check vehicle location/speed/route on Map through Vantrue Player Software.
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your....
Package included: 1 windshield adhesive gps mount, 1 Sticky Adhesive Tape, 2 Weeks free shipping..

Check Stock

LISEN Magnetic Phone Holder for Car Fit Curved Surfaces Car Phone Holder Mount Flexible & Stable Dashboard Magnetic Phone Car Mount with 3 Metal Plates Fit All iPhone 14/13/12/11,Pro,Pro Max,Android

LEGENDARY STABLE MAGNETIC PHONE HOLDER FOR CAR: With 2 3M adhesive pads, 6 magnets and an adjustable arch bridge design, this is definitely the most revolutionary magnetic phone car mount on the market. 2 sticky pads firmly stick the mount to any flat or curved surface. 6 magnets can hold all large mobile phones with metal plates. Arch bridge adjustment design can provide a larger and better field of vision. You won’t find a second such powerful and ingenious phone mount for car on the market..
DOUBLE ADHESIVE PADS, LARGER STICKING AREA: This magnetic phone mount for car adopts the design of double 3M adhesive pads with a larger area, and the sticking area is at least 200% bigger than other ordinary single adhesive pad one. The larger sticking area can fit the curved dashboard to the maximum extent. Thereby improving the stability and durability of the adhesive magnetic car mount by 200%.That car phone holder mount comes with 2 additional high quality 3M adhesive pads for replacement..
GRAPHENE 3M ADHESIVE, EXTREMELY STABLE: The adhesive strength of this upgraded double-pad magnetic car phone mount is over 66 lbs. The graphene-based adhesive pad has gorgeous heat resistance and heat dissipation. Tested by LISEN laboratory, in an atmosphere of 12....

Check Stock

Vantrue N1 Pro X4 X1 X1 Pro X2 R2 Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module for Windows and Mac

Vantrue N1 Pro / X4 / X1 / X1 Pro Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module(for Windows and Mac).
With this gps mount, you can check vehicle location/speed/route on Map through Vantrue Player Software..
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your....
Package included: 1 windshield adhesive gps mount, 1 Sticky Adhesive Tape.

Check Stock

MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS

What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more..
Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc..
CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need..
Strong Adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required..
These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc..

Check Stock