ReviewsAdjustable Angle Gauge

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution:0.05°,Accuracy:±0.3°,Repeatability:0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock

NEW QEP ROBERTS 10-56 ELECTRIC 6" LONGNECK JAMB SAW KIT WITH CASE

  • Adjustable cut height from flush to 1" above floor level.
  • Dual-angle depth gauge allows cutting at "straight on" or 45° angles to the wall.
  • Visual depth gauge scale provides precision depth control at 1/8" increments.
Check Stock

CLICK nGO CNG 2 Snow Plow for ATV & UTV

  • Complete UTV Plow System - Includes plow blade, wearbar, rubber flap, plow flags, push tubes, adjustable skid feet, installation hardware and instructions.
  • Heavy duty 72" straight plow blade, made of 12 gauge steel.
  • 65 degree attach angle and over center design rolls up and throws snow forward.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

10 Inch Super Gauge Shape and Outline Tool, Contour Gauge Profile Tool with Lock, Measuring Tools Shape Duplicator Woodworking Tools

  • ...durable than plastic locking mechanism. The lock also has a newly designed ergonomic shape. Easy to adjust when tracing multi angle shapes, easy to lock and accurately duplicate the shape for your needs, and also easy to unlock supergauge xl for next time use or storage..
  • [Adjustable Tightness]: Comes with a small screwdriver, the tightness of the superguage can be adjusted by screwing the 2 screws on the end. No need to worry about the plastic pins is too loose or too tight to slide in. You can adjust the tightness according to your needs while using. If the plastic pins is a little loose after being used for a long time, you can also adjust the tightness for your preferences..
  • [Durable Material]: The super gauge tool is made with high quality ABS plastic, would not scratch the surface of the object being duplicated. Unlike metal contour gauge, the contour gauge with lock is waterproof and rustproof. With high strength and durable material, our contour gage would be the great useful cool gadgets for men..
  • [Both Sides Measurements and Dual Scales]: The profile gauge tool has INCH&CM scales on both sides, makes it easier....
Check Stock

GEARWNCH 1/2\ Drive Electronic Torque Wrench 30-340 Nm -85077

  • 1/2 inch torque wrench angle gauge tool, suitable for many new engines using torsion yield fasteners..
  • The 360 degree scale is marked in 2 degree increments of 10 degrees and 1 interval of 30 degrees.
  • Turn the tool housing to easily reset it to zero for the next use.
  • The adjustable arm keeps the angle scale fixed..
  • Male and female square drivers with 1/2 inch.
Check Stock

Little Giant WW-3672-ADJ Welded Steel Workbench, 1 Lower Shelf, 10,000 lb. Load Capacity, 28\ - 37\ Adjustable Height x 72\ x 36\

  • Adjustable height welded steel workbench with gray finish for use in industrial and manufacturing plants, classrooms, laboratories, and other work environments.
  • 7 gauge steel top with 10,000 lb. load capacity when weight is evenly distributed.
  • 12 gauge steel lower shelf with 500 lb. capacity for storing items.
  • Legs made of 1/4" thick angle iron with 2" sides and 7 gauge steel corner gussets for strength.
  • Adjusts in 1" increments to heights between 28" and 37".
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • ...uge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
  • Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
  • Easily taper table legs or use for construction and remodeling.
  • VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
  • The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
  • ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
  • Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width....
Check Stock

ChgImposs 12″ Adjustable Sliding Combination Square Ruler & Protractor Level Measure Measuring Set, Inch/Metric

  • 12-Inch stainless steel ruler, protractor head, center head, square heads, for all your leveling needs.
  • Direct reading double 180 degree protractor scale.
  • Professional Inch/Metric tool, adjustable straight edge & depth gauge.
  • Straight edge with self-storing scribe, horizontal level, plumb level, angle measurer.
  • Be made of high stainless steel materials and will never rust or corrode.
Check Stock