ReviewsAdjustable Die Wrench

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Tub Drain Remover & Basin Wrench, Dual Ended Ratchet Wrench Use to Install and Remove Most Bath and Shower Drains and Closet Spuds Square Plastic Toilet Seat Nuts

  • Easy operation: use to install and remove most Basin, bath and shower drains and closet spuds. Can be used alone or with adjustable wrench Or use with screwdrivers inserted into one of two holes for the best torque, much easier.
  • Heavy-duty die-cast aluminum,Constructed from aluminum, lightweight Remover Tub drains, The lightweight material characteristics of aluminum alloy, even if the wrench is accidentally dropped to the basin or bathtub, it will not easily scratch scratch the bathtub or basin (This point is very important).
  • Dumbell wrench & Ratchet Wrench: It is shaped like a hammer and has a large head. We have thickened and Weight increase, You can use it like a hammer for simple fixed percussion(Caution!! Don't knock on materials with hardness higher than aluminum).
  • Function increase: extension from either end. Will also remove or install 3/8” or 1/2” etc plastic toilet seat nuts. Dual Ended Drain Wrench.
  • OUR COMMITMENT: We take pride in delivering a quality product. If within 30 days, you are unhappy for any reason, We will give a full refund..
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • ...er and the surface becomes stainless steel, making it to be more bright and textured.
  • Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
  • Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth opener kit is the nice assistant for craftsmen no matter if you are a novice or a skilled worker, which is very suitable for cleaning low-carbon steel or aluminum products in construction, automobile maintenance and factories, largely improving work efficiency and having strong practicability.
Check Stock

AKM 263Pc Thread Repair Kit HSS Drill Helicoil Repair Kit SAE&Metric，1/4 5/16 3/8 7/16 1/2 M5 M6 M8 M10 M12 Kit with Thread Gauge

  • This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
  • Sae&Metric: The kit Has Altogether 261 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools that allow you to have a smooth repairing experience.All Made According to Professional Standard..
  • All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
  • Creates stronger internal thread in soft materials.Also come with detailed instructions.Note:please read the listing carefully,this kit doesn't include the adjustable die wrench,if you want a die wrench you can choice our sae type:B09BMPJDB7..
  • Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Check Stock

LP256-S Tito Puente Timbales 13\ & 14\ Shells/Stainless

  • Stainless steel shells for bright, crisp and loud sound, 13" & 14" diameters, 6-1/2" deep.
  • Set includes a heavy duty, fully height-adjustable timabale stand with an anti-rattle sleeve and a die cast gear tilter.
  • Also includes cowbell bracket, timbale sticks and tuning wrench.
Check Stock

Latin Percussion LP257-BZ Timbal Solid Bronze

  • Solid bronze shells for warmer tones, 14" & 15" diameters, 6-1/2" deep.
  • Set includes a heavy duty, fully height-adjustable timabale stand with an anti-rattle sleeve and a die cast gear tilter.
  • Also includes cowbell bracket, timbale sticks and tuning wrench.
Check Stock

RYOBI AG4031G 4-1/2\ 5.5-Amp Angle Grinder

  • Lightweight design with 3-position handle for left or right-handed use with an additional possible v.
  • Tool-Free Adjustable Guard: Provides quick guard installations and adjustments.
  • Wheel guard adjusts for use in various applications.
  • Die-cast aluminum gear housing for durability.
Check Stock

Makita JN1601 Sheet Metal Nibbler, 16 Ga, 5.0 A, 120V,Blue

  • Clean and precise work in keystone plate, deck plate and other corrugated sheet materials.
  • Ergonomic, slim body design for easy gripping.
  • Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches.
  • Lock-on sliding switch for continuous operation.
  • Built-in thickness gauge for convenience.
  • Easy punch and die replacement for reduced down time.
  • Wrench (781028-4),Hex Wrench (783208-8),JN3201,JN3200.
Check Stock

Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard

  • HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
  • VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
  • DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
  • PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
  • COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock