ReviewsAdjustable Drywall Panel Lift

FivePears Panel and Plywood Carrier,Metal Gripper For board,Drywall carrying tool …

  • √ 【HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC.】 : Fivepears presents one of the most advantage tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. Use the Fivepears Lift to grip and carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch..
  • √ 【GRIP HANDLE FOR ONE-HAND CARRYING】 : This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover..
  • √ 【SOLID METAL CONSTRUCTION】: This drywall gripper is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
  • √ 【SELF-ADJUSTING GRIPPER CLAMP】: This piece of equipment by Fivepears has a ....
Check Stock

11FT Drywall Panel Hoist Professional Jack Lifter Heavy Duty Sheetrock Hoist Holder Rolling Wheels Lifter Construction Tool Capacity 150 LB Red

  • Lifts 11ft ceiling & 11ft wall. Apply various drywall panels up to 4ft*11ft..
  • This drywall panel lift lets you lift drywall and sheet rock without assistance.Sturdy welded steel construction with powder coating..
  • Hoist tilting for ceilings and walls. Can lower to 4.6ft off the floor for easy panel loading. 0.33ft caster wheels for easy rolling, built-in winch....
  • The sturdy welded steel construction holds single drywall panels up to 150 lb. and lifts up to 11 ft..
Check Stock

Stark Professional Series 16 ft Drywall Rolling Lift Panel Hoist Jack Caster Construction Dry Wall Lifting w/Caster Wheel Yellow

  • Allows One Person Working Alone - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install....
  • Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel....
  • Contractor Grade - Crafted from extra-duty, all-welded steel, this drywall lift can hoist panels up to 4' x 16' in size, with a maximum load of 150....
  • Versatile Function - Features a 16' reach for flat ceilings and over 19' reach on walls/angled ceilings.
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage.
Check Stock

VINGLI 11 FT Drywall Lift Portable Sheetrock Lift Rolling Panel Hoist Jack Lifter Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel,

  • Get Drywall Effortlessly by One Person--This drywall lift allows one person working alone to install full sheets of drywall in a fraction of the time, which is perfect for DIY and residential use.
  • Adjustable Telescopic Arm--The telescopic arm can be adjusted from 49' to 114', which is ideal for installing 4' x 16' sheets without assistance..
  • Safe for Use--This drywall lift is made of heavy-duty steel and built-in winch with brake, which guarantee safety and sturdiness while heavy lifting and placing of drywall sheets.
  • 150Lbs Load Capacity--This drywall lift can attach to level ceilings, sloped ceilings or side walls with a maximum load of 150 pounds..
  • Move Anywhere You Want--Features 3pcs of 5'' caster lockable wheels for easy rolling and stop..
Check Stock

KAFLLA 16 FT Heavy Duty Drywall Lift 150LBS Sheetrock Hoist Holder Rolling Wheels Red Suitable for Home and Commercial Use

  • [Function] This drywall lift allows you to lift drywall and slate without help. The sturdy welded steel construction can support single drywall panels....
  • Application of various drywall boards up to 4 feet * 16 feet.
  • [Material] It is made of strong welded steel structure with powder coating surface, which is strong and stable and corrosion resistant..
  • [Easy Installation] Removable without tools. Perfect for home and commercial use..
  • [Notes] For safety reasons, the feet stop to hold the lift in the proper position..
Check Stock

Drywall Lift Panel 11' 150lbs Lift Drywall Panel Hoist Jack Elevator Jack Rolling Casters Lockable Drywall Elevator Construction Tools Yellow

  • 【Yellow 4ft - 11ft Adjustable Height】Drywall lift can lift up to 4 feet x 11 feet Drywall, has 3 4" casters for easy rolling, Maximum load is 150 pounds..
  • 【Built in winch with brake】The lock device and built in winch brake to guarantee safety and sturdiness while working..
  • 【Features】It can be used to assist oneself to decorate the bedroom, kitchen, bathroom, etc. at home..
  • 【Can be operated by one person】This sturdy and stable drywall lift can be used to lift drywalls and slabs without assistance..
  • 【Easy assembly】Disassemble no tools required. Perfect for both home commercial use..
Check Stock

Drywall Tools Carrier, Plywood Panel Plasterboard Glass Board Handle Carry Load Lifter

  • ABS engineering plastic, anti-decoupling design to prevent goods falling down, ensure safe operation, TRA non-sliding material handle..
  • Excellent way to carry drywall, plywood, or solar panels,Reduces back strain, improves safety, and speeds up walking with a panel..
  • Size: 14.4" L ×6.5" W,Handle width 5.1" ,Base Plate width 2.6"..
  • The Thickened & Multi-frame Base Plate, With Great Load Bearing Approx 176 lbs..
  • Just hook the panel lifter around the bottom of the sheet at the center point, tip the sheet up and lift, leaving your lifting arm fully extended as if you were carrying a suitcase,Use your other arm to balance the sheet, keeping the drywall close to horizontal..
Check Stock

PanelLift Hangpro Drywall Lift for Walls Model 150

  • Great for any panel shaped material including drywall, OSB, plywood, insulation, cement board, siding, etc..
Check Stock

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

  • HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
  • GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
  • SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
  • EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
  • SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....
Check Stock

Drywall Lift Panel Hoist 11'' Drywall Lift Drywall Panel Hoist Jack Lifter Jack Rolling Caster Wheel Lockable Drywall Lift Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel

  • 【Stable and Safe】Our new upgrade drywall lift uses bolts to replace the original screw, making the lift more stable. When you push the lift to the right place and prepare for commissioning, simply block the wheels with the brake to prevent the machine from slipping to ensure your safety..
  • 【Adjustable Angle & Height & Length】This drywall lift can be tilted 60° forward or backward and rotated 360°. The telescopic arm can be adjusted from 46in to 107in, which is perfect for installing sheet metal. And the height can be adjusted from 52in to 107in. ​It is commonly used in flat and inclined ceilings..
  • 【150Lbs Load Capacity】This plate lifter is made of premium-performance steel, which ensures it‘s longevity and durability. And it can be attached to flat ceilings, inclined ceilings or side walls with a maximum load of 150lb..
  • 【Easy to Lift】Use the drywall lift to replace manual operation, making your work faster and safer. You only need to hold the winch wheel and brake arm firmly, turn the winch to complete the lifting. Give it a try and free your hands!.
  • 【Easy to Assemble and Use】This plate lift is easy to assemble and disassemble without tools. Thanks to it's good weight and strength, the plate lift can be folded quickly and ea....
Check Stock

CARTLIFE Plywood and Drywall Panel Carrier Tool,Sheetrock Gripper,Heavy Duty Metal Gripper for Clamp Wood Board or Drywall Lifter with Single Hand (No Back Pain)

  • ...ol can hold up to two panels or sheets simultaneously.Simple design that allows the clamp to grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet..
  • ✅【Easy on your back】 Traditionally carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift..
  • ✅【Only one-hand carrying】Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift..
  • ✅【Heavy Duty Holder】Carrying all kinds of plywood, panels, sheets, and slabs, carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper 0-1”.
  • ✅【Innovative Tool Design】Heavy-duty solid metal construction. The clamp and the handle arm are made in aluminum. The handle is made of impact-resistant ABS polymer. This high-quality construction ensures that the tool can ....
Check Stock