ReviewsAdjustable Hole Cutter For Wood

1-5/8" to 8" Adjustable Hole Saw Cutter, Adjustable Circle Hole Cutter Set with ABS Dust Shield Twin Blade Hole Saw for Plywood, Sheetrock Plaster, Ceiling Tiles, Fibergla

  • 【Safe and Clean】Ball bearing mounted strong ABS shield with soft silicon gasket dust seal, collects dust and shavings to prevent them from flying..
  • 【Professional Cutting 】Adjustable hole cutter beam features marked graduations for fast measurement and precise cutting.
  • Dual blade design, straight round effect, smooth cut and burr-free. Widely used in recessed lights, ceiling speakers, vents, plastic plate opening, DIY speaker opening, etc..
  • 【Scope of Application】Hole saw cuts smooth holes through plywood, laminates, composite, gypsum, rubber, plastic, hardwood etc. Note: It Can Not Be Used for Drill Metal or Stone..
  • 【Hole Cutter Kit】Add your 1/2" drill chuck – Needs ¼ power of hole saws so bigger holes easily cut. Before drilling to check whether the blade is fixed and adjustable diameter bolts tightened to prevent accidents..
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits with Improved Connection Drill Bit with 1/4 Hex Shank and Allen Wrench,

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set....
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable....
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with....
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider....
  • Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report....
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Wood Plug Cutters 8pcs Carbon Steel Wood Plug Cutter Drill Bits 16mm 13mm 10mm 6mm Straight and Tapered Taper Cutting Tool Cork Drill Bit Knife

  • 【Ideal Wood Plug Cutter】- The curve at the top is good for chip removal and the perforation is more efficient. 8 piece plug cutter set makes....
  • 【Different Cutter Diameters】- The shank diameters are 9.5 mm / 0.37 in, tail diameters size are 6mm(1/4"), 10mm(3/8"), 13mm(1/2") and 16mm(5/8").....
  • 【Durable Hole Tool】- They must be used on a drill press instead of a hand held drill, the cuts then will be precise and clean. For the hand....
  • 【High Quality Materials】- The wood plug cutters are made of high quality carbon steel. the cutter set achieves excellent finish when using same....
  • 【Package List】- This set includes 4 standard plug cutters and 4 four-tooth chamfered cutters. the standard plug cutters drill the length of the....
Check Stock

Bushcraft Gear for Survival Settlers Bushscraft Hand Auger Wrench with Flint Scotch Eye Wood Drill Peg and Manual Hole Maker Multitool with leather Case Camping brown

  • EXCLUSIVELY SHARP: Made of high-quality hardened oxidized steel materials, settler wrench easy to drill,sharp and durable. Comes with professional welding technology to link the scottish eye cutter and wood drill bits.
  • thanks to Professional grinding for every spiral and scottish eye cutting point,aggressively sharp hand auger wrench to bore the perfect hole and peg.
  • TWO IN ONE FUNCTION: Comes complete with a leather sheath.
  • Manual hand drills not only will it bore a connector hole, but make the connection peg for you.
  • COMPACT AND CONVENIIENT: Use a stick through the eye for leverage making the scotch eye auger drill simple to drill a hole, then using protective wrap to protect your hands from cuts and allows you to make wood pegs more conveniently and quickly when using the sharp scottish eye cutter to hammer into a branch for a peg the same size as the hole drilled before.
  • BUSHCRAFT TOOLS AND CAMPING TOOLS: Carry this bushcraft gear when you're outdoors camping, hiking, backpacking, bushcrafting, EDC or building with primitive cabin tools in the wild, making an emergency shelter becomes a breeze. giving you a pleasan....
Check Stock

Amartisan Hole Cutter 1-5/8 to 8 40 - 200mm Adjustable Hole Saw Cutter with ABS Dust Shield for recessed Lights Ceiling Speakers Vent Holes

  • [SCOPE OF APPLICATION]：Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc..
  • [SIZE ADJUSTABLE]：Double blade hole cutter applied 1-5/8" to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two....
  • [DUSTPROOF DESIGN]： ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making....
  • [HOLE CUTTER KIT]：It is a very practical tool set with dozens of hole saws that make it faster, safer and easier to cut the required hole size..
  • [STURDY CARRY CASE]：Easy to carry, it is a tool that carpenters, professionals and DIY home owners need to punch holes for recessed lights, ceiling....
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

40 Pcs Wooden Bead Maker Beads Drill Bit 6-25mm Carbide Ball Blade Milling Cutter SetCemented Carbide Spherical Buddha Beads Woodworking Tool Kit(11 Blade,1 Shank, 26pcs cores,Instructions and Video)

  • ✔【Material And diameter size 】 The Bead Drill tools made by Alloy Steel material, high hardness, very durable in use, corrosion resistance and anti-rust. Package include: 6/8/10/12/14/15/16/18/20/22/25mm blade+1pcs shank+ 26pcs cores..
  • ✔【Concave cutter】: These quality, C-shaped, cemented carbide cutter drill through any wood with precision.Each ball comes out almost perfect that you just need a little sanding or polishing..
  • ✔【Instructions for use】 - First ofal install the krives and fix the wood to ensure that the knives are concentric and the wood does not shake.
  • Secondly, drill the knife toward the wood at a constant speed. After one side is formed, stop drilling, turn the wood on the other side, and aim at the original center hole to drill the wood at a constant speed until the beads fall off and stop drilling.
  • Finally, use a jig to fix the beads, use a round tool to round the wooden beads, use sandpaper to polish and polish in the order of coarse to fine, and then wax.Attached: Before making the finger knife, you need to drill a hole witha twist drill of about 3m, and then follow the normal instal lation steps..
  • ✔【Warranty within 30 days】：if any accessory is damaged within 30 days, please contact customer service, we guarant....
Check Stock

BLUECELL Pack of 4 Stainless Steel and Wood Circular Clay Hole Cutters for Pottery and Sculpture

  • Package included 4 pcs different diameter hole cutter.
  • Sharp polished metal cutting tubes with wood hand.
  • Consists of 4 different sizes for different hole making needs..
  • Suitable for pottery, polymers, clay, rubber, paper clay, etc..
  • Be used for punching, scraping and marking of clay..
Check Stock

Victorinox Swiss Army Swisstool Spirit X with Leather Pouch Stainless Steel, 105mm

  • ...n material and workmanship. Making a lifetime commitment has never been so easy. No assembly required, money back guarantee..
  • PRODUCT DETAILS: Swiss made multi-tool with 24 tools and lockable blade. Height: 0.7 in, Length: 4.1 in., Weight: 7.4 oz., Scale Material: Stainless steel.
  • FUNCTIONS: needle-nosed pliers, wire cutter for thin and soft wire up to 40 HRC, hard wire cutter, large blade, Phillips screwdriver 1/2, reamer/punch, multipurpose hook, can opener, screwdriver 3 mm, bottle opener, screwdriver 6 mm, crate opener, wire bender, scissors, wood saw, metal saw, metal file, screwdriver 2 mm, chisel 7 mm, cable cover longitudinal cutter, cable cover crossways cutter, wire stripper and scraper, lanyard hole, coupling for corkscrew.
  • 22 Function multi tool for around-the-house or job site use.
  • Includes screwdrivers, wire cutters, bottle openers, saws, pliers, and much more.
  • All stainless steel construction protects tool from rust or decay.
  • Stores comfortably in nylon case or hangs from neck via lanyard hole.
  • 3-1/4-Inch long, weighs 5-3/4-Ounce, lifetime warranty.
Check Stock