ReviewsAdjustable Torque

Essential Rob Halford

  • ✅ [20 Voltage & 266 In-lbs Max Torque] - This 20V high voltage cordless drill driver will provide up to 266 In-lbs (30N.m Max) torque rotation strength to overcome resistance..
  • ✅ [2 Variable Speeds] - Featuring a 2-variable-speed switch (0-350 and 0-1350 RPM), combined with an adjustable clutch gives you the versatility to drill different materials and use a variety of bits. Low speed for screwing and high speed for drilling..
  • ✅ [Household Hand Tools & 14” Pink Storage Bag] - The home tool set comes with many hand tools including slip joint pliers, groove joint pliers, adjustable wrench, long nose pliers, magnetic screwdriver holder, screwdriver bits, utility knife, tape measure, etc. The 14" Pink women's tool bag is great for home improvement and DIY projects..
  • ✅ [3/8” Keyless Chuck] - The 3/8" keyless chuck allows the cordless drill to use a variety of bits for common tasks around the house. With the Forward/Reverse switch you can install/remove the bits by hand tightening or loosening the chuck..
Check Stock

HomeSoGood Angle Meter, Torque Angle Gauge For Torque Wrench 360 Degrees Adjustable Easy To Read Measurer Car Garage Tool

  • Torsion angle gauge scale is 0-360 degrees, 1/2'' drive ratchet handle..
  • Torque Meter is made of sleeve and outer casing durable plastic, which is durable and not easy to be damaged..
  • It is a special tool for angle torque gauges. It is used for torque wrench 1/2 torque gauge..
  • Torsion angle gauge adjustable arm has 2 different length, flexible to use. for torque wrench 1/2 drive..
  • It is convenient for adjustment and can be used in many occasions. It is widely used for our next reuse..
Check Stock

Park Tool Preset Torque Driver, 5NM

  • ...read. Idea for use on stems, seat clamps, lever clamps, cranksets, rotors and more..
  • 【15PCS BIKE TOOL KIT】– Includes Hex: H2, H2.5, H3, H4, H5, H6, H8. Torx: T10, T25, T30. Philips Bits: PH1, PH2, PH3.Slot Bits: 4mm and 50mm extension bar for reaching concealed bolts. Bespoke protective molded case to keep the adjustable torque wrench and tool bits stored safely, also includes ‘storage’ section inside case to store bolts when using the wrench. Reversible 72-tooth ratchet head measures torque in clockwise and counter clockwise directions. Engage and release bit installment button.
  • 【PROFFESIONAL QUALITY AND WARRANTY】 - Our bicycle torque wrench sets are fully calibrated and tested for accuracy and come with a calibration certification provided for each tool..
Check Stock

WSMLA Torque Impact Wrench Pneumatic wrench large torque 1/2 industrial pneumatic wrench

  • The RAPTOR RP-6000 is a non-impacting, constant rotation pneumatic torque multiplier with adjustable torque output of 714 ft/lbs to 5,990 ft/lbs..
  • Every Unit is Calibrated In an ISO17025 Laboratory. The RAPTOR RP Series Pneumatic Torque Wrench provides continuous and repeatable torque with +/- 5% accuracy..
  • Manufactured with AQ Certified Alloys, the RAPTOR’s patented gear technology gives greater durability and lower operational temperatures..
  • Combined with a sealed housing and ergonomic grip, TorcUP ensures operator comfort and safety..
Check Stock

Silverline Spiral Ratchet Screwdriver 437mm

  • Push to start direct plug-in 115 volts screwdriver, RPM 1000.
  • Torque range 8.8 - 26.4 in-lb (10.0-30.0 kgf-com).
  • Reverse/forward switch, torque adjustable by external dial.
  • Other Customers Searched: Electric Screwdriver, Screwdriver, Push-to-Start Screwdriver, Sumake Tools.
Check Stock

TAGVIT 15 PCS Open End Interchangeable Torque Wrench Set, 9mm x 12mm Interchangeable Head Torque Wrench for Bicycle, Air Conditioning Maintenance, etc.(4-22 ft.-lb/5.4-30 Nm)

  • 【± 3% High Precision】The accuracy of the 9mm x 12mm open end interchangeable torque wrench is ±3%, and the adjustable torque range is 4-22ft.-lb/5.4-30Nm. The interchangeable torque wrench adopts dual scale design to meet your different needs. The scale is clear and easy to read, not easy wear..
  • 【Two Ways To Use】The square interface of the open end interchangeable torque wrench measures 9mm x 12mm, and can be used with a 1/4" ratchet head and Interchangeable open end adapters. The two use methods can be freely selected according to your needs..
  • 【Reversible Ratchet Head】The 1/4 inch ratchet head included with the interchangeable torque wrench has a quick release button for quick installation and removal of the socket. By adjusting the paddle on the head of the ratchet head you can switch the direction of clockwise and counterclockwise use, which is convenient and quick..
  • 【Easy To Use】The interchangeable head torque wrench has a safety lock ring. After pulling down the lock ring, turn it to set the required torque. After the setting is completed, release the lock ring, and the lock ring will automatically rebound to lock the torque value. When the set torque value is reached, the torque wrench will send click and vibration to remind to s....
Check Stock

Electronic Torque Wrench, 3/8\ Drive Siz

  • Integrated notch on wrench head to ensure tight fit on flare nut.
Check Stock

IDEAL Electrical 35-936 Torque Screwdriver Kit [7 Pieces] – 0 to 36 Lb. Adjustable Torque Screw Driver w/ Phillips, Flat, Square Bits. Driver Bit Set

  • Electrical Screwdriver: an assortment of screwdriver and driver bits, this 7-pcs. screwdriver set is commonly used by electricians and maintenance engineers to tighten cross- and slotted-head screws.
  • Durable Construction: carefully engineered with hard-wearing materials, the torque driver is immune to abrasion and wear over a prolonged usage and stays resistant to corrosion as well.
  • Adjustable Torque: the bit driver has user-settable torque from 0 to 36 lb. It can be changed using the unique torque limiting clutch which disengages once the preset torque is achieved, preventing overtightening and possible damage.
  • Protective Cap: the nut driver bit set is equipped with a protective vinyl cap which not only keeps the handle protected. but also shades the torque key slot that is used to get accurate control torque adjustments.
  • Product Specification: the 7-in-1 driver bit set comes with #1 and #2 Phillips bits, #1 and #2 Square bits, and 1/4 in. and 3/16 in. Slotted/Flat bits.
Check Stock

TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy

  • ...switch the clockwise or counterclockwise direction of use. The 72-tooth ratchet is more precise, capable of turning fasteners in tight spaces, suitable for bicycle, motorcycle, car repair and maintenance, and many other industrial uses..
  • Rugged and Durable: The head of the adjustable torque wrench is made of hardened chrome vanadium steel with a quick release button for quick installation and removal of the socket. The handle design is ergonomic, with a non-slip design, comfortable grip, anti-rust and anti-corrosion. The extended wrench is more labor-saving and easy to use..
Check Stock

NEIKO 10573B 1/4” Torque Screwdriver Set, 20 Hex Bits, 10 to 50 In-Lbs, Long Shank Screwdriver Torque Wrench, Adjustable Inch-Pound Torque Screwdriver for HVAC and Gunsmiths (Pack of 25)

  • GUNSMITHING TORQUE WRENCH: This long shank torque screwdriver has a meter window that displays a 10-50 inch-pound range that is adjustable in 5 in-lb increments to ensure tightening to a specified torque as seen in firearm accurizing..
  • INCH POUNDS CLICKER: The torque driver clicking warning feature allows this small torque wrench to torque to a set level, which avoids damage to threaded fasteners. Accurate torque settings of +/- 6 percent to all types of screws and fasteners..
  • EASY TORQUE ADJUSTMENTS: The 'Pull-Turn-Lock' handle is designed to ensure easy adjustment setting and automatic tension locking on this torque screwdriver. Electrician work and instrument assembly are key applications..
  • 1/4” HEX: The quarter inch drive head is compatible with any 1/4-inch socket, which allows uses such as electronic repair, firearm accurizing, scope rings, bases, optic mountings and many more applications..
  • COMPLETE SCREWDRIVER SET: Includes heavy duty storage case that doubles as a carrying case and 20 of the most common detachable bits: Phillips (2 x: #0, #1, #2, #3), Slotted (2 x: 4,6mm), Torx (T10,T15,T20,T25,T30,T40) and Hex (3,4,5,6mm)..
Check Stock

FIX IT STICKS Tightening +/- 10% Accurate 15-65 inch-lbs All-In-One Torque Driver Tool Kit w/ T-Way Wrench Bits Socket Adapters

  • MULTIPURPOSE USE - Choose Fix It Sticks All-in-One Torque Driver, Fix It Sticks All-in-One Torque Driver Kit or Mini All-in-One Torque Driver to tighten down your scope rings, mounts, actions screws, red dot sights, mounting plates, etc. to the correct tongue while in the field, at the range, or at home.
  • NO OVER/UNDER TIGHTENING - Enjoy ultimate performance with lightweight and compact All-in-One Torque Drivers - no more over or under tightening your critical components.
  • EASY ADJUSTMENT - Just turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 inch-lbs).
  • in case with Mini All-in-One Torquer Driver just turn the drive handle until the hash mark lines up with the torque value you need (from 6 - 25 inch-lbs).
  • 1/4" BIT & DRIVER COMPATIBLE - These adjustable Torque Drivers accept any standard 1/4" Bit and works with any standard 1/4" Driver.
  • ZIPPERED CASE (KIT ONLY) - The Fix It Sticks All-in-One Torque Driver Kit goes with a zippered carrying case with a holder.
Check Stock