ReviewsAdjustable Weight Plate

Adjustable Weights Dumbbells Set 44 Lb Free Weights Dumbbells Set with Connector 4-In-1 Dumbbells Barbell Set Weights Set for Home Gym Workout Exercise Training for Men Women

  • 【4-IN-1 FITNESS DUMBBELLS KIT】- This adjustable barbell set has a total weight of 44 lbs,can be connected as a barbell through a connecting rod, and then adjust the dumbell weight according to your needs. ranging from 4.4lbs to 44lbs,the handheld portable dumbbell sets design Helps to adjust and shape the arms, shoulders,chest, back,legs and strengthen muscles, allowing you to exercise dumbbells and barbells at home or in the office to fully meet your upper and lower body exercise needs.
  • 【SAFETY THICKENED CONNECTING BAR】- The adjustable weight dumbbells barbell set,include Straight and curved bars,connecting rod is made of material non-slip, sweat-absorbing and thick foam, with an ergonomic grip.
  • and intimately prepared gloves and wrist guards for you, allowing you to enjoy the exercise process without worriest,the environmentally friendly ABS shell on the dumbbells provides the necessary grip and safety, protects the floor and equipment from scratches, abrasions and dents.
  • 【DOUBLE LOCKING NUT】- The special double locking nut design on the weight dumbbell set has bump slot between the two nuts. When you tighten them, the two nuts will fit tightly, preven....
Check Stock

JFG RACING Motorcycle Dirt Bike Stand Lift Jack Hoist Table Height Adjustable Lifting Stand Dirt Bike Accessories

  • Fully adjustable deck height allows fit for most bikes. Adjustable range: 25.2 cm (9.92 in) - 46 cm (18.11 in). The adjustable top plate is secured with a lock nut to ensure safety..
  • Maximum lifting weight is 150 kg (330 lbs).
  • Top plate size: 28 cm (11 in) *17.5 cm (6.9 in)..
  • Easy to assemble. The safety pin is connected to the arm so that it won't get lost..
  • Made of solid steel. The durable anti-slip pad helps prevent bike slippage..
  • Allows easy and controlled lifting of your off-road motorcycle.
Check Stock

VideoSecu 2 Adjustable Height(26.5 to 47 inches) and palte Speaker Stands MS07B2 1B5

  • Side Clamping top plate can adjust width from 5.5 to 11 inches (140mm-279mm).
  • The top plate can pan 180 degrees and tilt +/-10 degrees for level adjustment.
  • Height adjustable from 26.5 inch to 47 inch ( 673mm - 1193mm ).
  • Adjustable screw-in rubber feet keep unit level on carpet or hard floor.
  • Concealed wire management, Stability ensured.
Check Stock

Model X All-Mountains Snowboard Bindings (Large) for Boot Size 9.5-12

  • Style: This is an all-mountain snowboard binding, packed with adjustable features. Ride groomers, back-country, or park. Fine tune your equipment according to the environment you are snowboarding in..
  • Features: 360-degree M3 EVA padding, tool free adjustable high-back, tool free adjustable ankle and toe cap, double actuating aluminum buckles with large thumb release lever, thick temper padded ankle & toe cap.
  • both equipped with inset crank strap compartments for a completely hidden look. An extendable EVA padded base plate and universal 4x4 mounting discs system - mounting hardware included (disc, screws & washers).
  • Material & Flex: Rated a 7 out of 10 for flexibility weighing only 4.5lb each. This is due to our fiberglass scaffold structure inside the polyurethane high-back and base plate.
  • giving them flex and stability. Considered a light weight medium stiff binding..
  • Sizing: Medium bindings fit a snowboard boot size (US, 6 - 9) Large bindings fit a (US, 9.5 - 12). The MODEL X Binding is compatible with all Snowboarding Boot Brands. Size 11.5 - 12 boot will require the extended base plate and extended toe cap features for a secure fit..
  • 100% satisfaction or your money back! - Lifetime warranty.
Check Stock

Model X All-Mountains Snowboard Binding Medium | for Boot Size 6-9

  • Style: This is an all-mountain snowboard binding, packed with adjustable features. Ride groomers, back-country, or park. Fine tune your equipment according to the environment you are snowboarding in..
  • Features: 360-degree M3 EVA padding, tool free adjustable high-back, tool free adjustable ankle and toe cap, double actuating aluminum buckles with large thumb release lever, thick temper padded ankle & toe cap.
  • both equipped with inset crank strap compartments for a completely hidden look. An extendable EVA padded base plate and universal 4x4 mounting discs system - mounting hardware included (disc, screws & washers).
  • Material & Flex: Rated a 7 out of 10 for flexibility weighing only 4.5lb each. This is due to our fiberglass scaffold structure inside the polyurethane high-back and base plate.
  • giving them flex and stability. Considered a light weight medium stiff binding..
  • Sizing: Medium bindings fit a snowboard boot size (US, 6 - 9) Large bindings fit a (US, 9.5 - 12). The MODEL X Binding is compatible with all Snowboarding Boot Brands. Size 11.5 - 12 boot will require the extended base plate and extended toe cap features for a secure fit..
  • 100% satisfaction or your money back! - Lifetime warranty.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Check Stock

CURT 48341 Adjustable Pintle Mount for 2-Inch Hitch Receiver, 10,000 lbs, 11-1/2-Inch Drop, 10-Inch Length

  • HIGHLY ADJUSTABLE. This high-strength pintle hitch mount provides maximum vertical adjustment to ensure level towing. It offers 6 height adjustment positions with a maximum drop of 11-1/2 inches (for use in drop position only).
  • VERSATILE. This adjustable pintle mount is compatible with multiple accessories to accommodate different types of towing. The face plate holes are spaced apart 1-3/4 inches high by 3-5/16 inches wide.
  • STANDARD FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch mounting plate features a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch hitch receiver.
  • SOLID STRENGTH. For dependable towing on the job, this pintle mount is rated for 10,000 lbs. gross trailer weight. The shank and mounting plate are constructed from solid steel with a high-strength design.
  • WEATHER-RESISTANT. This pintle hitch mounting plate is finished to long outlast the outdoor elements, featuring a durable carbide black powder coat finish. This protects the steel against rain, snow, mud, road salt and other corrosive threats.
Check Stock

MIUONO Weight Plate Holder, Wall Mounted Weight Rack Storage for 2" Olympic Weight Plate, 4 Pack Home Gym Organizer

  • Space Saver: Wall mounted weight plate holder keeps both rubber weight plates and steel weight plates off the floor to save space in your gym while keeping all weights in a small and organized space.
  • 330 LB Weight Capacity Per Peg (Do Not Install It on DRYWALL, the loading wall is suggested): Heavy welding to achieve a capacity load of up to 330lb per weight plate rack peg. The weight plate rack is 9" long, 1.9" in Diameter, matching the 2" Olympic weight plate greatly.
  • Anti-Abrasion Pad: 6MM EVA pad to avoid the abrasion of the weight plate, the smooth end of the peg to prevent scratching back and forth, take out with ease to begin daily strength training in your home gym.
  • Stable Weight Plate Wall Storage: Made of heavy-duty steel with powder coated. The frosted surface design holds the weight plate securely in case of slipping off.
  • Package Included and WARNING: 4-pack Weight plate holders, 8-pack expansion bolt for concrete wall, and 8-pack hex lag wood screws for wood wall. WARNING: Do Not Mount the Weight plate holder on DRYWALL. It may fall off and damage the wa....
Check Stock

RHYTHM FUN Adjustable Dumbbell Set Weights Fitness Dial Dumbbell for Women Man at Home 5-in-1 Adjustable Dumbbell 25 LBS for Exercises in Home Gym Workout Equipment

  • ✅HIGH-END POURING DUMBBELLS - Unlike ordinary dumbbells, our adjustable dumbbells use high-end pouring technology, will not rust and corrode, and have no odor. Nylon wrapped weight steel plate will effectively protects your wood or tile floor from scrapes and scuffs.It is the first choice for high-end dumbbells for fitness..
  • ✅5 in 1 DESIGN MEET MULTI NEEDS:RHYTHM FUN 25lb single dumbbell has 5 weight options(5 lbs, 10 lbs, 15 lbs, 20 lbs, 25 lbs),Adjustment weights suitable for professional and beginner, bring rich exercises feeling during training for both,which offers great versatility and interchangeability. The Accurate weight conversion can help you accurately locate the weight indicator and train scientifically and effectively..
  • ✅USER-FRIENDLY SIZE AND DESIGN:The size of the adjustable dumbbell set is 17.32''x9.84''x6.3'',fits in most spaces, easy to store and move around. Stable triangular design avoids annoying rolling around and harsh noises, use with dumbbell tray, enjoy the smoothly training process, the striking red top will reminds you that here it is and avoid accidental trip. making your workout easier..
  • ✅SAFE AND STABLE STRUCTURE: Our dumbbells have a unique built-in locking structure,It could prevent from weight plate dr....
Check Stock

UNKLE METAL Strength Training Plate Trees Wall Mounted Weight Storage Space Saving, Olympic Bumper Plate Weight Rack Storage, Perfect Garage Home Gym Strength Training (4-Peg and 2-Weight Wing)

  • [Design] - This weight plate storage rack assembly size is 21.65 "long x 81.28 "high.
  • each column can be stored Two 45-pounds of the bumper or 4 45 pounds of cast iron plates.
  • [Rugged] - Durable steel structure plus black powder layer provides durable, rugged shelves for your weight plate, and the durable surface coating of this weight plate storage wall mount can effectively resist scratches and minimize weight reduction The wear of the board ensures long-term safety use.
  • the width is 2 " weight nails suitable for any standard Olympic size weight plate, barbell, insurance barboard or cast iron plate.
  • [Save space] - Different from the traditional design, this Bumper Plate Weight Rack can save a large amount of space and footprint, no counterweight plate or barbell.
  • [Easy to assemble] - just use a spliced screw, and only from the wall extends 8 inches, you can fix this Bumper Plate Weight Rack Storage to your wall, open a happy fitness journey, Have a healthier body. Complete Plate Weight Rack and mounting accessories in parcels.
  • [Application is wide] - This Weight Plate Rack can be installed in your garage, home gym, living room, balcony, courtyard or light commercial gym.
Check Stock

IRON COMPANY Body-Solid Leverage Bench Press

  • Independent, unilateral arm action for balanced muscle development.
  • Converging press arm movement for advanced biomechanics.
  • Adjustable press arms to fit all size users, with gas assisted start positions.
Check Stock