ReviewsAdjustable length Taper Shank Reamer

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Drill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

ATOPLEE T Handle Reamer Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance,1/8-1/2 inch 3.18-12.7mm

  • {Good Quality Material}Made of hardened and tempered tool steel(45# steel) with precision ground cutting edges,more hardness and durable..
  • {T-Handle Design}Easy turning and sure handling .；The degree of the taper is:10.
  • {Many Usage}Enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.Also perfect for when a drill could cause cracking in sheet metal, plastic and other materials with little effort..
  • Total Length:140mm ；Shank Diameter:13mm.
  • {Package Included} 1pcs Hand Tapered Reamer.
Check Stock

HSS 1-1/4\ MT3 Taper Shank Drill

  • Size: 42.00mm, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 7/8\ HSS 3MT Taper Shank Drill Bit, DWDTS7/8

  • Size: 3/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 5-7/8, Overall Length: 9-3/4, Shank Size: 2MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 1-47/64\ HSS 5MT Taper Shank Drill Bit, DWDTS1-47/64

  • Size: 1-47/64, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 1-1/64\ HSS 3MT Taper Shank Drill Bit, DWDTS1-1/64

  • Size: 1-3/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 4MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Drill America 1/2\ Carbide Tipped 2MT Taper Shank Drill Bit, DWDTS Series

  • Size: 25/32, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 6, Overall Length: 9-7/8, Shank Size: 2MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 1-1/32\ HSS 3MT Taper Shank Drill Bit, DWDTS1-1/32

  • Size: 26.00mm, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 6-1/2, Overall Length: 11-1/8, Shank Size: 3MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock