ReviewsAffordable Air Ducts

uxcell Aluminum Foil Tape Black Matte Tape Non Reflective 15mmx50m/164ft for HVAC, Sealing, Patching Hot and Blocking Light

Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed..
The tape is in a black finish, Non-Reflective but absorbs light from ambient light sources. suit for blocking lighting, spills on heat-generating equipment.
This adhesive aluminum tape provides an excellent bond on metals, plastics, copper, ceramic, and concrete..
designed to easily seal HVAC Air Ducts as well as other Hot or Cold Intakes..

Check Stock

Taytools 465388 Set of 6 each 4 OD Blast Gates Self Cleaning No Clog Aluminum for Dust Collection System

Designed to fit 4" diameter hose or ducts.
Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts.
Open slot at back to for self-cleaning, no-clog operation.
Cast aluminum, steel sliding gate, locking knob.

Check Stock

uxcell Aluminum Foil Tape Black Matte Tape Non Reflective 10mmx50m/164ft for HVAC, Sealing, Patching Hot and Blocking Light 2pcs

Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed..
The tape is in a black finish, Non-Reflective but absorbs light from ambient light sources. suit for blocking lighting, spills on heat-generating equipment.
This adhesive aluminum tape provides an excellent bond on metals, plastics, copper, ceramic, and concrete..
designed to easily seal HVAC Air Ducts as well as other Hot or Cold Intakes..

Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..

Check Stock

Professional Grade Aluminum Foil Tape - 2 Inch by 210 Feet 70 Yards 3.6 Mil - High Temperature - Perfect for HVAC Sealing & Patching Hot & Cold Air Ducts Metal Repair More!

2 INCH BY 70 Yards - 33% MORE THAN THE COMPETITION! - Made in a Beautiful Silver Metal Finish..
INCREDIBLY RESISTANT - Easily Resists Moisture, UV Rays, Flames, Chemicals, and Performs well in any type of Weather!.
PERFECT FOR SEALING AIR DUCTS - Designed to easily seal HVAC Air Ducts as well as another other Hot or Cold Intakes..
STICKS TO ANY SURFACE - Designed for HVAC but easily sticks to any type of finish, just ensure surface is clean of debris..
TEMPERATURE RATING for of up to 250 degrees F and as low as -4 degrees F.

Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..

Check Stock

uxcell Aluminum Foil Tape Black Matte Tape Non Reflective 12mmx50m/164ft for HVAC, Sealing, Patching Hot and Cold Air Ducts

Temperature: Short Term 120℃/ Long Term 95℃.
Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed..
The tape is in a black finish, Non-Reflective but absorbs light from ambient light sources. suit for blocking lighting, spills/leakages on heat-generating equipment (projectors, light cans, barn-doors, etc)..
This adhesive aluminum tape provides an excellent bond on metals, plastics, copper, ceramic, and concrete. Conformable and pressure-sensitive adhesive enables it to fit on corrugated joints and irregular corners..
designed to easily seal HVAC Air Ducts as well as other Hot or Cold Intakes..

Check Stock

EXTECH Instruments 407113 CFM Metal Vane Anemometer

4" (10cm) vane allows for more precise readings on larger size ducts.
Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point.
Multipoint and timed average calculations.

Check Stock

Sliver Aluminum Foil Tape for Duct Work, 1 in x 66 ft (4 mil) Reflectix Tape Perfect for HVAC, Patching Hot, Cold Air Ducts, Metal Repair…

【RUI SPEED foil tape】Made from Acrylic adhesive and Aluminum foil, High temperature resistance, it is a metal tape for duct work.
【HVAC tape for ducts】Used for shielding, insulating, repairing, seaming and sealing, Mainly used for HVAC, chilly air ducts, dryer vent, vents, refrigerators, air conditioning, hoods, cars, etc.
【Insulation tape】Ensure the heating and cooling effects of the material, it is very suitable for maintenance tasks and insulation tape, provides a durable bond at low and high temperatures.
【Metallic duct tape】Can be combined with most materials, whether metal or ground, can be cut into various specifications according to customer requirements, which is not easy to crack and damage after repeated use or multiple bending.
【Ducting tape aluminum】Using high-quality pressure-sensitive adhesive, strong adhesion, anti-aging and other effects, good waterproof performance, UV degradation, against flame, insulation, moisture,corrosion.

Check Stock

Sliver Aluminum Foil Tape for Duct Work, 1/2 in x 150 ft (4 mil) Reflectix Tape Perfect for HVAC, Patching Hot, Cold Air Ducts, Metal Repair……

【RUI SPEED foil tape】Made from Acrylic adhesive and Aluminum foil, High temperature resistance, it is a metal tape for duct work.
【HVAC tape for ducts】Used for shielding, insulating, repairing, seaming and sealing, Mainly used for HVAC, chilly air ducts, dryer vent, vents, refrigerators, air conditioning, hoods, cars, etc.
【Insulation tape】Ensure the heating and cooling effects of the material, it is very suitable for maintenance tasks and insulation tape, provides a durable bond at low and high temperatures.
【Metallic duct tape】Can be combined with most materials, whether metal or ground, can be cut into various specifications according to customer requirements, which is not easy to crack and damage after repeated use or multiple bending.
【Ducting tape aluminum】Using high-quality pressure-sensitive adhesive, strong adhesion, anti-aging and other effects, good waterproof performance, UV degradation, against flame, insulation, moisture,corrosion.

Check Stock

uxcell 15mm Aluminum Foil Tape High Temperature Tape for HVAC,Sealing,Patching Hot and Cold Air Ducts Adhesive Tape 50m/164ft

Temperature resistance：long term: 80℃, short term.
Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Rubber Based Adhesive, Directly stretched around the area to be protected, no adhesives needed..
Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
Perfect for sealing air ducts, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..Please be noted,the tape only one side has adhesiveness.

Check Stock