ReviewsAftermarket Glock Barrels

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Meprolight Glock Tru-Dot Night Sight for G-26 & G-27 adjustable set

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear....
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more....
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very....
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Concealment Express OWB Paddle KYDEX Holster fits Glock 19/19X/23/32/45 G1-5 | Left | Carbon Fiber Black

  • OUTSIDE THE WAISTBAND KYDEX PADDLE HOLSTER fits: Glock 19/19X/23/32/45 (Gen 1 - Gen 5) (ONLY unless Specified). Our minimalist OWB paddle holsters are....
  • EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels....
  • ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your Glock 19/19X/23/32/45 (G1-5), you'll hear a satisfying ‘CLICK’ letting you....
  • 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery &....
Check Stock

GLOCK 17 Blowback .177 Caliber BB Gun Air Pistol, Gen4 , Black

  • 18-shot, .177 caliber BB air pistol with realistic blowback action.
  • Powered by a 12-gram CO2 cartridge (CO2 not included).
  • Shoots .177 caliber steel BBs at up to 320 fps.
  • Features a full metal slide, drop-out metal mag, and realistic controls.
  • Fixed Glock-style sights and officially licensed Glock markings.
Check Stock

Umarex Glock 17 Blowback .177 Caliber BB Gun Air Pistol, Gen3

  • 18-shot, .177 caliber BB air pistol with realistic blowback action.
  • Powered by a 12-gram CO2 cartridge (CO2 NOT included).
  • Shoots .177 caliber steel BBs at up to 365 fps.
  • Features a full metal slide, drop-out metal mag, and realistic controls.
  • Fixed Glock-style sights and officially licensed Glock markings.
Check Stock

Magpul Hunter X-22 Takedown Front Barrel Mount, Black

  • Compatible with the Mogul hunter X-22 takedown Stock (MAG760).
  • Easy exchange of different barrels for the same rifle.
  • Reversible barrel tray accepts factory and aftermarket barrels up to 0. 92" Outside diameter.
  • Adjustable barrel-tensioning shim for setting barrel preload. Dimensions - 10.5 x 1.75 x 1.9 inches.
  • M-look slots on sides and bottom for a variety of accessory and sling mounting options.
  • dimpled drill point to install optional Sling swivel studs.
  • Reinforced polymer construction for strength and durability.
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Concealment Express LUX KYDEX Holster fits ARC TLR1 | Right | Black

  • INSIDE THE WAISTBAND WEAPON MOUNTED LIGHT HOLSTER The Lux (Latin for Light) is the cousin to our X-FER line. The Lux Extended is a dedicated minimalist appendix IWB holster but still offers full coverage of the Weapon light along with an extended muzzle area to protect from hot comps and threaded barrels. It utilizes the same patented design of the X-FER for locking onto the weapon light. The Lux offers a smooth draw along with the ability to re-holster. The Lux has an integrated wedge and belt.
  • COMPATIBLE COMPS: (we will update as more customers report back) Agency Arms 417, Roland Special, TBRCi Micro and Stubby.
  • Currently known to fit the following: Glock G19, G17, G17L, G30s, G34 Frames (including the different calibers) S&W, M&P Full size, Walther PPQ Gen 1 and M2, CZ P-10 Does NOT fit the following: Glock G21, G20, G30, G30sf, Sig 320 Full & Compact.
Check Stock

Ade Advanced Optics rd3-012-G-1 6MOA Green Dot Micro Mini Reflex Sight for Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have....
  • This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes....
Check Stock