ReviewsAftermarket Glock Sights

AGGXPF Fiber Optic Sights for Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39 - Contrasting Red/Green Photoluminescent Outline for Outdoors, No Tritium (Red Green Dot Sights)

  • 【Compatible】Fits For Glock Fiber Sights Set for Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 and 39 (Excluding M.O.S. models)..
  • 【Special Material】The surface of Fiber Optic Front and Rear sights is made of aluminum alloy, with solid construction, coating finished. Providing maximum protection and durability. And as small sights accessories for Glock, portable for you to carry, concealed from your target, fit standard holster, will not snag your clothing and holster..
  • 【Wonderful Design】Features Quick and accurate U-notch Design. Concealed Fiber cannot be seen by target. Contrasting Red/Green Dot Sights for even faster focus. Note: Visible in all shooting conditions (can’t use in the completely dark enviroment).
  • 【Auxiliary precision shooting】Front and Rear Red Green Tri-Dot aiming system of contrasting front and rear colors. The sights for Glock have encased bright red/green dots fiber optics, glow bright for day time use. AGGXPF sights are always ready, increase the accuracy of your shooting..
  • 【Quality After Sales】Fiber-Optic sights package includes 1 x Fiber-Optics set(Front Red Dot Fiber-Optic sight & Rear Green Dot Fiber-Optic sight), 1x allen wrench. If there is any quality problem with the product, please feel free to c....
Check Stock

Black Kydex Holster Compatible with Glock 19 p80 (Polymer 80)

  • Compatible with Glock 19 p80 (Polymer 80) *Holster will not accommodate OEM pistol.
  • OWB (outside waist band) Holster- Vertical Draw Right Hand Use.
  • Genuine .80" Kydex- 1.5" Injection Molded Belt Loops for attachment. Minimal width allows and ergonomical curve contours to hip for maximum concealability..
  • OWB design will clear a RMR RDS Optics and Aftermarket Taller Suppressor Sights (up to .365)..
  • SUPERB CONSTRUCTION WITH OUTSTANDING QUALITY 100% MADE IN THE USA.
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Real Avid Universal Glock Sight Pusher | Front and Rear Sight Tool for Glock 19, 17, 43, 26, 22, 48 & More | Pistol Sight Pusher Tool for Adjusting Dovetail Sights on Most Glock Sight Styles

  • PRECISION sight pusher tool for handguns to push, change, install and adjusts press fit dovetail front and rear sights on most Glocks.
  • COMPATIBLE with Glock Models including 19, 21, 17, 43, 26, 22, 48 & more.
  • SLIDE locking base fits subcompact, compact, standard and competition Glock slides.
  • INCLUDES: the 2-IN-1 Tool for Glock which stores securely in the handle. This tool includes a pin punch for disassembly and maintenance and a 3/16” nut driver for changing Glock front sights..
  • EASILY and safely change press-fit sights on Glocks in 3 easy steps. Fits most Glock sight styles.
  • See instruction sheet for compatibility chart..
Check Stock

Black Kydex Holster Compatible with Glock 19 23 32 Surefire X300 Ultra-A Model

  • Compatible with Glock 19 23 32 Surefire X300 Ultra A Model (rail clamp).
  • OWB (outside waist band) Holster- Vertical Draw Right Hand Use.
  • Genuine .80" Kydex- 1.5" Injection Molded Belt Loops for attachment. Minimal width allows and ergonomical curve contours to hip for maximum concealability..
  • OWB design will clear a RMR RDS Optics and Aftermarket Taller Suppressor Sights (up to .365)..
  • SUPERB CONSTRUCTION WITH OUTSTANDING QUALITY 100% MADE IN THE USA.
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Trijicon GL02 Night Sight Installation Tool Kit for Glock Models

  • Installation tool kit for Trijicon Bright & Tough and HD Night sight sets for Glock models.
  • Not compatible with Trijicon Suppressor Sights or Glock 42/43 models.
  • Contents: Rear sight pusher tool and front sight screwdriver for the small retaining screw.
  • Does not work with Trijicon Suppressor Sights.
  • Trijicon night sight tool kit for Glock models.
Check Stock

LABOBOLE Glock Tool Kit, Front Sight Tool, Magazine Disassembly Tool Compatible with Glock 19 26 27 43 Accessories Glock Magazine Tool

  • Magazine Disassembly Tool: Removal and installation of Glock front sights.
  • Front sight tool: It is a 3/16’’ hex thin wall nut driver to install and remove the front sights on Glock pistols.Solid build construction, made of durable metal..
  • Pin Punch Tool is a disassembly tool for removing pins on all Glock pistols.
  • Disassembly tool – This Disassembly Tool is compatible with all Glock models and many other guns.
  • 2.5mm dia x 32mm long (1.25″) hardened steel pin.
  • Made of durable metal, compatible with all Glock Models.
Check Stock

PTOUGE Glock Tool Kit, Front Sight Tool, Magazine Disassembly Tool Pin Punch Tool for Glock 19 26 27 43 Accessories (Glock Tool kit)

  • Magazine Disassembly Tool: Removal and installation of Glock front sights.
  • Front Sight Installation Hex Tool to aid in the installation and removal of front sights on Glock pistols.
  • Pin Punch Tool is a disassembly tool for removing pins on all Glock pistols.
  • Made of durable metal, Tool set compatible with Glock: Magazine Disassembly / Front Sight Installation Hex Tool / Disassembly Tool.
  • Tool Kit Compatible with Standard Glock 9/40mm, Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41ect. Please note: The Tool kit does not work on the Glock 30 round magazines or extended type base plates..
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and....
Check Stock