ReviewsAgricultural Machinery Bearing

[10-Pack] R24-ZZ - Deep Groove Radial Ball Bearing 1.5 in x 2.625 in x 0.5625 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Metal Shield

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Metal Shield.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.5625" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 10 Pieces of Ball Bearing.
Check Stock

[4-Pack] R24-ZZ - Deep Groove Radial Ball Bearing 1.5 in x 2.625 in x 0.5625 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Metal Shield

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Metal Shield.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.5625" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 4 Pieces of Ball Bearing.
Check Stock

[5-Pack] R24-ZZ - Deep Groove Radial Ball Bearing 1.5 in x 2.625 in x 0.5625 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Metal Shield

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Metal Shield.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.5625" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 5 Pieces of Ball Bearing.
Check Stock

[10-Pack] R24-2RS - Deep Groove Radial Ball Bearing 1-1/2 in x 2-5/8 in x 9/16 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Rubber Seal

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Rubber Seal.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.4375" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 10 Pieces of Ball Bearing.
Check Stock

Othmro 10Pcs 6204-2RS Deep Groove Ball Bearings Double Rubber Sealed Bearings High Carbon Chromium Bearing Steel Roller Guide Bearing 0.79x1.85x0.55inch for Scooters Skateboards

  • 【Size】-20x47x14mm(Inner DiaxOuter DiaxThickness).
  • 【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
  • 【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
  • 【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
  • protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
  • 【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.
Check Stock

Othmro 2Pcs 6202 2RS Deep-Groove Ball Bearings, Double Sealed Bearings, Gcr15 Deep Groove Ball Bearing 0.59x1.38x0.43inch for Scooters Elevators Skateboards Robot Ship Rudder Shafts

  • 【Size】-15x35x11mm(Inner DiaxOuter DiaxThickness).
  • 【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
  • 【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
  • 【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
  • protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
  • 【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.
Check Stock

MEETOOT 6 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers 3/4

  • The needle roller thrust bearing can only bear axial load in one direction.
  • Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways.
  • Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise.
  • The hardened chromium steel roller has heat resistance and durability under heavy load.
  • Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
Check Stock

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock