ReviewsAir Brake Chamber Series

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.
Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".

The Water Chamber for ICON Series Heated Humidifier is the replacement ICON Disposable Water Chamber. The water chamber holds 420 ml of water..
The chamber is dishwasher safe however it cannot be disassembled..

The Water Chamber for ICON Series Heated Humidifier is the replacement ICON Disposable Water Chamber. The water chamber holds 420 ml of water..
The chamber is dishwasher safe however it cannot be disassembled..

Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.

10Vacuum Chamber Digital Heat Pad Please Read Before You Buy! Chamber NOT Included, Sold Separately..
Heat Pad must fit correct size of the chamber! Fits 2&3 Gallon aluminum pots and 1.6 Flat Chamber This Digital Heat Pad will adhere to the bottom of a chamber vessel with a peel and stick backing. This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement)..
This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement)..
The temperature offset must be found to set the controller accurately..

Triple 12-inch Universal Fit Armored Series Ported Subwoofer Enclosure.
Gross Internal Air Space: 4.30 ft³ | Tuned at 37 Hz.
Engineered to Get Extremely Loud and Low - Triple Chamber Design with Kerf Ports.
Extremely Heavy Duty Enclosure with a Durable and Attractive Armor Coated Finish.
Subwoofer Hole Cut-Out Diameter: 11.125" | Mounting Depth: 7.625".

✅SNUG CONNECTION: Snugly connect your SC 1200 Machine with your AirSense 10 and Aricurve 10 Series machine. Fit greatly with precise compatibility..
✅PERFECT COMPATIBILITY: Compatible with cleaning machines with “1200SC” in serial number. Compatible with AirSense 10 and Aricurve 10 series....
✅SEAL TO AVOID AIR LEAKS: Tubing adapter is precisely made to line up perfectly with water chamber. Seal tightly to avoid leaking air or water..
✅EASY TO USE: Simple in design and precise manufactured to fit your machine perfectly. Easy to assemble to you machine and secure to close tightly..
✅100% Satisfaction Guarantee: We offer 100% satisfaction guarantee. If you have any question, contact us freely and we offer timely response..

Dual-chamber Direct Airflow Path design for outstanding cooling potential.
Clever, space-saving design still offers lots of internal volume.
Includes three High Performance Air Series AF140L fans for better, quieter cooling.
Tons of expansion room for high performance air cooling and liquid cooling.
Maximum gpu length is 12.59 inch, maximum psu length is 9.84 inch and maximum cpu cooler height is 6.69 inch.
Front dust filter.Compatibility-ATX, Micro ATX, E-ATX, and Mini ITX compatible.
Black interior. Full side panel window. Cable routing cutouts with rubber grommets.

900 total Square inch cooking surface- 619 Square inches in main chamber, 281 Square inches in firebox chamber.
Reverse-flow smoker employs a Series of 4 baffles to guide heat and smoke through the main chamber delivering an even and delicious result.
Removable baffles and optional smokestack locations for a customizable setup.
Firebox chamber features large stainless Steel fuel basket and clean-out door for easy ash removal.
Heavy-gauge all-steel construction, porcelain-coated cooking grates and multiple dampers for easy heat and smoke control.

【PREMIUM MATERIAL】：Our air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 ,SAE J1131 Air Brake system Requirements and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4" ..
【EASY TO USE】: Union connect two tube with same OD. All dot air quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mut....

Heated Build Plate Temperature: Up to 110°C (230°F) - Auto-Leveling Platform with An Aluminum Base.
Print Volume: 220 x 200 x 250 MM (8.7 x 7.9 x 9.8 IN) - Magnetic Removable Build Platform.
Print Precision: ±0.1 MM (Tested with 100 MM Cube) - Quick Release Nozzle with Ultra-Fast Heat up.
0.6 MM & 0.3 MM (Optional) - Compatible with PLA, PETG, ABS, PC, PLA-CF, PETG-CF / Compatible with FlashForge 0.3....
Fully Enclosed Printing Chamber & HEPA 13H Air Filter System Manage series of Adventurer 4 3D Printers remotely for ultra-efficiency with high output,....