ReviewsAir Compressor Tank Outlet Fitting

AUTOINS PCP Air Compressor,Auto-shutoff 4500Psi/30Mpa Oil/Water-Free Set-pressure Air Gun and Paintball Tank Pump with Water/Oil Separator,with External 600W Power Adapter(110V AC or 12V Car Battery)

  • Newly Upgraded One-button Start Auto-stop PCP Compressor:The fan will automatically stars when the compressor is powered on.Cooling fan does not need to be operated by button,which avoid forgetting to turn on the cooling fan, resulting in high temperature damage the motor. The metal button is enlarged, which is comfortable and convenient to touch.The line connection of AUTOINS compressor was simplified.It is recommended that the air cylinder volume is limited to 1L (60ci)..
  • Water/Oil-Free & Oil-Moisture Filter: No trouble of externally circulating cooling water or adding oil. Instead, two high-power cooling fans are built in to dissipate heat. And the multiple vents on the shell can cool the compressor in different directions. All are just to ensure that this PCP air pump can maintain long time stable operation. An oil-moisture filter has been integrated at one end of the hose. It can efficiently prevent oil and moisture from corroding your airguns or air tanks..
  • 8mm Fast Disconnecting Fitting and Powerful Air Compressor: Both ends of the hose are 8mm FOSTER female connectors, which can directly fit the male nozzles of most PCP air rifles and paintball cylinders. The rated power of this air compressor is 600W. Inflating Speed: 500CC tank, from 200BARS ....
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check Stock

SMACO Scuba Tank Diving Gear for Diver Mini Scuba Tank Oxygen Cylinder with 15-20 Minutes Capability Diving Oxygen Underwater Breathing Device 1L Diving & Snorkeling Equipment S400 (F-Green)

  • ...ATE】:✅The S400 scuba tank has passed the DOT certification and can be inflated directly at the diving shop. ✅Use the 8mm SMACO refill adapter. The large diving tank leads to the small diving tank , the filling time is 8 seconds. ✅SMACO high pressure hand pump, the filling time is 35-50 minutes. ✅SMACO air compressor, the filling time is 26 minutes. Easily solve inflation problems.(The air pressure of the diving bottle cannot exceed 3000psi).
  • 【WHAT YOU WILL GET】:❤Perfect diving packages(include a 1L pony bottle , a cloth bag and a refill adapter )❤24 hours services online.❤Lifetime Customer Support..
Check Stock

SMACO Scuba Tank Diving Gear for Diver 1L Mini Scuba Tank Oxygen Cylinder with 15-20 Minutes Underwater Breathing Portable Diving Tank Kit for Underwater Exploration Emergency Rescue Pony Bottle S400

  • ...ATE】:✅The S400 scuba tank has passed the DOT certification and can be inflated directly at the diving shop. ✅Use the 8mm SMACO refill adapter. The large diving tank leads to the small diving tank , the filling time is 8 seconds. ✅SMACO high pressure hand pump, the filling time is 35-50 minutes. ✅SMACO air compressor, the filling time is 26 minutes. Easily solve inflation problems.(The air pressure of the diving bottle cannot exceed 3000psi).
  • 【WHAT YOU WILL GET】:❤Perfect owner diving packages(include a 1L pony bottle, a cloth bag and a hand pump )❤24 hours services on line.❤Lifetime Customer Support..
Check Stock

Ninja Air HPA PRO V2 Series Tank Regulator - 4500 PSI

  • The paintball air tank regulator max up to 4500psi high pressure gauge input, 800psi regulated output..
  • The HPA tank regulator fits most of air tanks with inlet threads M18×1.5-6H, the outlet threads size is G1/2-14..
  • The regulator made of good quality materials, sturdy and durable, an economical high performance tank regulator. With a high air flow rate to make paintball shoot out with faster speed..
  • The regulator comes with standard 8mm quick disconnect male foster fitting adapter for filling..
  • The regulator is high air flow rate, light weight, easily operation and re-buil dable, applicable medium with Air..
Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

  • 40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

  • 27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

  • 14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

  • 31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 30 Gallon RV Waste Black Water Holding Tank WT-3000

  • 30 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 24 Gallon RV Waste Black Water Holding Tank WT-2400

  • 24 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock