ReviewsAir Cooled Heat Exchanger

KING GH2407TB Electric Garage Heater w/Bracket and Thermostat 7500W / 240V

12V DC Water /Coolant Pump for Radiator/Heat Exchanger. Perfect for Air to water Intercooler, Super Charger Applications..
Volume: 30L/Min (8 Gal/Min)- Inlet outlet: 3/4" (O.D.)- 9500rpm Brushless Motor- Voltage: 12V DC- Current: 2.8A±10%- Capacity: 30L/Min (8 Gal/Min or....

Balaclava is made with high-performance 320g fleece for cold weather.
The technology of the heat exchanger captures heat from each exhaled breath and brings the heat back to the bodys core, helping to prevent loss of body heat.
Heat exchanger is removable for versatility and adjusts with hook and loop attachment for a form-fit.
Built-in aluminum nose piece allows for snug fit every time.

[Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
[Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
[Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
[Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
[Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

[Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
[Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
[Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
[Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
[Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

The cold head is designed with multi-platform fastener and supports 58.4×58.4mm and 53.3×53.3mm..
GeForce GTX Series graphics cards with two main hole spacing designs (recommended for GTX960/980/980Ti/1050/1060/1070/1070Ti, AMD R390/290/280 series or other graphics cards of corresponding level), please make sure that your graphics cards support the disassembly of the original radiator before purchase..
The right side of the cold head is equipped with an air-cooled auxiliary heat dissipation unit and attached with pasted heat dissipation particles, which can ensure that the display and power supply sections are fully cooled..
Powerful water pump with ceramic bearing is equipped with pure copper cold head of micro-channel, which can take away GPU heat more quickly..
The encrypted 120 aluminium thin row is selected for both heat dissipation efficiency and good compatibility..

Heavy-duty air-cooled hot knife designed for continuous use cutting of synthetic fabrics, ropes and cords..
Kit includes Hercules FC-520 heat cutter, type-R blade, cutter foot, hard plastic case and cleaning brush..
Lightweight, variable power control. Heats up in seconds and the air-cooled design allows the FC-520 to run continuously..
Heats to approximately 800 degrees farenheit, easily sealing the edges of cut materials which prevents fraying..
Blades, parts and accessories available at: http://fc520.herculescutters.com.

For outboard, water cooled & air cooled 2-cycle engines.
Including those calling for 100:1 fuel to oil ratio, & all air cooled 2-cycle engines requiring an NMMA TC-W, TC-W11 or TC-W3.
Exceeds requirement of water cooled outboards and air cooled engines at heavy loads and high speeds for long periods.

Manufactured in ISO/TS16949 2009 certified facilities by the advanced machines and each fan clutch is built to stringent OE specifications by an OE manufacturer and is 100% factory tested for reliable, leak-free performance.
Utilize a bimetallic element that reacts to heat exchanger air temperatures to control fan speed.
Smooth transitional speed, eliminate air conditioning head pressure spikes, reduces cyclic fan noise.
Boost engine performance and improve fuel economy.

Hot water heater: Heat the whole house with this boiler featuring a self-cleaning stainless-steel heat exchanger with a modulating ceramic burner and....
Smart Features: Multizone control capability allows thermostat and control pumps to connect directly to the boiler of the smart heater that warms the....
User-Friendly Interface: Electric heater features a digital display main screen, a temperature and pressure display, and an outdoor reset sensor with....
Space-Saving Design: Compact wall-mounted design of this water heater saves space.
multiple venting options include a 2-inch PVC up to 60 feet and....
Guaranteed to Last: 12-, 5-, and 1-year residential and 5-, 5-, and 1-year commercial standard warranty for heat exchanger, parts, and labor....

This part is compatible with models including.
Evaporator J1800002360 is the heat exchanger that removes moisture from the air in the dehumidifier.
Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore Elite.
This evaporator (part number J1800002360) is for dehumidifiers.
A service technician should do this repair because it involves recovering and recharging refrigerant in the sealed refrigerant system.