ReviewsAir Core Coil

Coil Tattoo Machine,8 Wrap Coils Machine Liner Shader Brass Tattoo Coil Machine Tool,Coils Tattoo,Temporary Tattoosfor Liner Shader Tattoo Liner Shader for Tattoo Artists

  • Coil Tattoo Machine-Voltage: The normal starting voltage of the tattoo coil machine tool is 5V, and the working voltage is 7-12V, so it is best for you to use the tattoo coil machine under this voltage range..
  • Tattoo Art Supply-8 Wraps: The tattoo coil machine is an 8 wraps winding copper core coil, specially designed for the coil machine, which is very convenient and durable, I believe you will be satisfied..
  • Stability: The stable working speed and high strength of the tattoo coil machine make it work for a time without getting hot, strong striking force and low power..
  • Temporary TattoosTool-Accurate: of the coil tattoo machine is made of alloy, which is very lightweight and processed by accurate wire cutting to avoid the size error of the manual machine and ensure the dimensional accuracy..
  • Coil Tattoo Machine-Liner Shader: The brass coils tattoo machine can be used for liner and shader. It is a good helper for professional tattooists and is of great help to their tattoo work..
Check Stock

SVS Ultra Tower Speaker - Each Piano Gloss Black

  • Vented voice coil former to minimize air compression artifacts at high drive levels.
  • Heavy-duty voice coil for enhanced power handling and thermal management.
Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

TUPARTS Pack of 1 Ignition Coil Fits for Nissan 350Z Infiniti G35/M35/FX35 2003-2008 Replacement for OE: UF401 C1439 5C1430

  • ...L COMPATIBILITY: Nissan 350Z Infiniti G35/M35/FX35 2003-2008 (for more accurate compatibility, just refer to the FITMENT BAR above the listing for more details). Make sure it fits your vehicle before purchasing..
  • COILS COMPONENTS AND FUNCTION: The ignition coil is mainly composed of primary coil, secondary wire and core. In the ignition system, the ignition coil is used to change the low-voltage electricity into high-voltage electricity, so that the spark plug produces spark..
  • COIL PACKS REPLACeMENT TIME: Generally speaking, the service life of ignition coil is over 100,000 kilometers. If the ignition coil on the vehicle needs to be replaced because of aging, then even if only one failure occurs, it is best to replace it all together, because the others are similar..
  • MAINTENANCE OF IGNITION COILS: Prevent ignition coil from heating or damp. Do not turn on the ignition switch when the engine is not running. Check, clean and tighten line joints regularly to avoid short circuit or tie-up. Control Engine Performance to Prevent over-voltage. The moisture on the ignition coil can only be wiped with cloth, otherwise the ignition coil will be damaged..
  • ABOUT WARRANTY: 12-months after-sale warranty and online answers during working time. If you have any ....
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

Ricks 27-21328 Stator

  • SUBZERO TECHNOLOGY: RMSTATOR exclusive stator core architecture & aeronautic-grade components maximize electromagnetic flow which reduce significantly the heat generated by the stator. Our stator run cooler than OEM equivalent for increase longevity..
  • PRO-FIT SYSTEM: Includes everything required to perform a RMSTATOR-style professional installation: Exact OEM fit, rubber grommet, pickup pulser coil, part connectors & dielectric connector grease..
  • S3T PRO SYNERGISTIC MANUFACTURING PROCESS: Our stator aren't built from thin air. RMSTATOR unique stator manufacturing process includes OEM specifications mapping, prototypes vigorous testing & 7-step production-ready parts testing on the only stator testing equipment in North America..
  • PEACECON 2 WARRANTY: We trust our products so much that we are backing them with a stress-free 2-year warranty. Go ride and have fun, RMSTATOR got your back..
  • VALIDATE FITMENT BEFORE PURCHASE: Check product details to confirm your vehicle fitment. Our images show actual item..
Check Stock

BassBox 6 Pro User Manual

  • ... With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speaker for strong bonding between all parts of it. Best quality Lead-free solder used for a strong connection between Coil wire, Tag, and Copper tensile wire. Best Flexibility Spiders/Dampers for accurate cone movement..
  • These Subwoofers are ideally suited for a wide range of portable speech and music sound reinforcement applications. It renders optimal performance because of its high-compatible assembling..
Check Stock

8 Wrap Coils Tattoo Machine, Tattoo Liner Shader Kit Brass Tattoo Coil Machine Tool for Professional Tattoo Artists and Tattoo Beginners

  • Accurate: of the coil tattoo machine is made of alloy and is very light. By precise wire-cutting process, the size error of manual machines is avoided and the accuracy of the size is guaranteed, which is perfect for beginners and professional tattoo artists..
  • 8 Wraps: The tattoo coil machine is an 8 winding copper core coil with compact design and excellent quality to ensure stable power output. It is very convenient and durable..
  • Stability: Tattoo coil machine works at a stable speed, high , long working hours, no heat, strong striking force and low power, enough to help you finish the job easier and faster..
  • Voltage: The normal starting voltage of a tattoo coil machine is 5V and the working voltage is 7-12V, so you'd better use the tattoo coil machine within this voltage range. It is made of high quality alloy material, which is sturdy and durable..
  • Liner Shader: The brass coil tattoo machine can be used as a liner and colorant. It is a good helper for professional tattooists to achieve the highest and control during tattooing, which helps a lot in tattooing work..
Check Stock

Professional Tattoo Coils 28mm 32mm 10 Wrap Copper Wire for Tattoo Machine Tattoo Parts for Tattooing Gun Shader Liner Green Red 2 Colors (28mm, Green)

  • 1 The tattoo coils are made of high quality steel core and copper wire,powerful and long lasting..
  • 2 Top and bottom is using wood as heat insulation,with transparent cover,ensuring better insulation and beautiful appearance..
  • 3 Design for professional coils tattoo machines..
Check Stock