ReviewsAir Cylinder Parts

SMACO Scuba Diving Equipment 1L Mini Scuba Tank with Hand Pump Support 15-20 Minutes Underwater Breathing(No More Than 30m) S400Pro Diving Oxygen Tanks for Diving Sightseeing/Backup Air Source, Black

  • ✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes when it is full of air (it's a test result in an environment of 16 ft underwater and 50°F, the diving time related to many factors: water temperature, water pressure, and personal breath rate and so one). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft)..
  • ✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight belt, you can carry the gas cylinder on your waist and move freely.
Check Stock

Complete GY6 Cylinder Head Rebuild Kits with valves, Trkimal 57.4mm 150cc Big Bore Upgrade Kits for 4 stroke 157QMJ Engines Chinese scooter moped parts, GY6 Engine parts Sunl Roketa Peace

  • 【Cylinder Bore】: 57.4mm / Non-EGR Cylinder body.
  • 【Full sets of parts】: Complete parts is suitable for motorcycle maintenance shop, motorcycle parts supermarket and personal use with nice price..
  • 【Apply to】: GY6 4 stroke 125cc/150cc engine for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 150cc Cylinder Head Comp, 57.4mm Bore Cylinder Block, Set of 57.4mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, DC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 14 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 90, belt 835*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch, intake mani.
Check Stock

Air Compressor, 80 Gallon Vertical Tank, Single Stage, 16 CFM, 5HP, 1PH (Campbell Hausfeld CE4104)

  • Compressor boasts 80 gallon tank, 140 maximum PSI and 16.0 CFM @ 90 PSI for high volume air flow.
  • The two-cylinder, cast-iron pump is designed for long, reliable life of up to 10,000 hours.
  • Operates over 20 high demand air tools for automotive spray painting, automotive sanding work, cutting sheet metal and more.
  • Fully enclosed metal belt guard offers high protection and safety from moving parts.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Caltric Exhaust Pipe Outlet Spark Arrester Compatible with Honda Trx400 Ex Sportrax 400 2X4 1999-2008

  • Replaces OEM Part # 12100-KCY-670 12191-KCY-672 12200-KCY-670 12251-MBV-013 12310-KCY-672 12391-KCY-671 13011-KCY-670 13101-KCY-670 13111-KCY-670 90601-KA5-000 14000-KCY-670 15410-KF0-315.
  • TOP NOTCH PARTS REPLACEMENT 440cc BIG BORE CYLINDER, COMPLETE HEAD AND PERFORMANCE CAMSHAFT HONDA TRX 400EX.
  • COMPLETE HEAD AND PERFORMANCE CAMSHAFT HONDA TRX 400EX.
  • THIS CAMSHAFT OFFERS 15% INCREASE IN POWER WORKS WELL WITH STANDARD AND BIG BORE KITS UP TO 440cc.
  • 1X PISTON. 1X PISTON PIN. 2X CIRCLIPS. 1X COMPLETE SET OF RINGS. 1X HEAD GASKET. 1X BASE GASKET. 1X HEAD COVER GASKET. 1X CHAIN TENSIONER GASKET. 1X COMPLETE CYLINDER HEAD (POLISHED INTAKE AND EXHAUST PORT) 1X PERFORMANCE CAMSHAFT 1X GASKET MAKER. 1X THREAD LOCK. 1X FUEL FILTER. 1X AIR FILTER 1X OIL FILTER. 1X FREE NGK SPARK PLUG.
Check Stock

Scuba Tank 1L Mini Scuba Tank Support 15-20 Minutes Underwater Breathing No More Than 30m Scuba Diving Accessories Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source Green

  • ✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes (it's a test result in an environment of 16 ft underwater and 50°F, the diving time is different from person to person). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft).(For uncertified diver, please check in advance if your local dive shop can inflate for you).
  • ✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
  • The scuba tank will be split into three parts ....
Check Stock

Scuba Tank with Hand Pump Mini Scuba Tank Support 15-20 Mins Underwater Breathing No More Than 30m Scuba Equipment Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source Green

  • ✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes (it's a test result in an environment of 16 ft underwater and 50°F, the diving time is different from person to person). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft).(For uncertified diver, please check in advance if your local dive shop can inflate for you).
  • ✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
  • The scuba tank will be split into three parts ....
Check Stock

Scuba Tank with Hand Pump Mini Scuba Tank Support 15-20 Mins Underwater Breathing(No More Than 30m) Scuba Equipment Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source, Black

  • ✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes (it's a test result in an environment of 16 ft underwater and 50°F, the diving time is different from person to person). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft).(For uncertified diver, please check in advance if your local dive shop can inflate for you).
  • ✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
  • equipped with air switch, which can be turned off when not use to avoid air leak.
  • equipped with pressure gauge to see the real-time pressure.
  • the release valve is equipped in the breath valve, can easily release pressure..
  • ✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
  • equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, an....
Check Stock

Birds Choice SCF-Clear Bird Cylinder Seed Cake Feeder, Medium

  • The scalloped design protects the seed cylinder.
  • The bottom catches parts of the cylinder as the wild birds peck off pieces.
  • The hanging pole and seed cake are not included.
  • Clear Cylinder Feeder are a great way to feed your birds any seed or suet cylinder in our clear cylinder feeder.
Check Stock

HPDAVV Rotary Screw Air Compressor 10HP / 7.5KW - 39-35CFM @ 125-150PSI - 230V/ 1 or 3-Phase/ 60Hz - NPT3/4" Variable Frequency Drive - Commercial Air Compressed System - PACK7V

  • ...entific research and other requirements of high-quality compressed air sector.Ideally suitable for variable air demand from low to medium volumes, also providing either direct driven from the motor or belt driven via pulleys from the motor..
  • 【ASME Certified NEMA Motor】Equipped with an iron construction with cast cylinder sleeves, this pump head is designed for a long time use and is easy for maintenance. Can replace this pump for origin engine, the cost of this complete pump is half the cost of repair parts for the original pump rebuild, This pump pumps up pretty fast and is also high flow tank works good on a 1.5-3 hp motor. The streamlined cylinder's cover and cooling fan can lower the temperature quickly and saving energy..
  • 【Standard Warranty】: HPDAVV provided with one-year warranty,the air end with two-year warranty and lifetime maintenance. We also have some of the best air supplier are able to support the after-sales services.
Check Stock

Hakka Brothers Sausage Stuffers and Sausage Makers 15L

  • Equipped with Two fill rates system , easy to use and quick.
  • All parts that contact food directly are reach up SGS food hygiene standard.
  • 4 different diameter S/S nozzle 2/3" inch(16 mm), 5/8" inch(22 mm), 1-1/4" inch(32 mm) and 1-1/2"inch(38 mm).
  • All Stainless Stell Sausage Stuffer (All Stainless Steel Base Plate, Cylinder, Stuffing Tubes & Canister. Piston includes an air release).
Check Stock