ReviewsAir Flowmeter

MR CARTOOL T130 Automotive EVAP Smoke Machine, Dual Mode 12V Car Fuel Pipe System Leak Tester Detector with Oil Level and Adjustable Flowmeter for All Vehicles

  • ...: Not suitable for air conditioning system piping..
  • 【Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
  • 【Flowmeter, Oil Level Meter & Pressure Gauge】Equipped with pressure gauge, oil level meter and adjustable flow meter. All data are clear at a glance, which helps you better control the smoke effect. Built-in overheat protection, if it exceeds 176°F, it will automatically turn off the power..
  • 【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Various of Soft Rubber and Hard Rubber Hose Plugs..
  • 【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues about the EVAP Leak Tester, don't hesitate to contact us directly..
Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

  • CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
  • PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
  • RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
  • APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
  • PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

Blue-White Flowmeter for 4 in. PVC Pipe, Horizontal Installation

  • F-300 Acrylic Flowmeter Dual GPM/LPM scale printed on both sides of the meter.
Check Stock

Blue-White Professional Series Flowmeter for 2.50\ Pipe NSF 50 Listed

  • F-300 Acrylic Flowmeter Dual GPM/LPM scale printed on both sides of the meter.
Check Stock

Environmental Express QuikVap® Evaporating System; 240 VAC

  • Evaporate to dryness or concentrate for further analysis.
Check Stock

Environmental Express QuikVap® Evaporating System; 120 VAC

  • Evaporate to dryness or concentrate for further analysis.
Check Stock

Mityvac MV5545 PRO Fuel System Test Kit

  • Designed to diagnose and pinpoint common fuel system failures including failing fuel pump, faulty pressure regulator, blocked filter, pinched fuel....
  • Saves hours of troubleshooting time by diagnosing a bad fuel pump.
  • Simulates extreme driving conditions in the shop to provide the most accurate diagnosis.
  • Flowmeter faceplates with gal./minute and l/minute units of measure.
Check Stock

Forney 309 140-Amp MIG Welder, 120-Volt,Green

  • Processes include MIG (Gas) and Flux Cored.
  • Euro-connect MIG gun with Tweco #1 compatible consumables.
Check Stock