ReviewsAir Gage

Gun, Hand Gun - Colt 45 Acp: Eight Shots Handgun, Pistol & Revolver Firing, Sound FX

  • Dillon Case Gage 45 ACP, Case Gage, reloading equipment, reloading parts, reloading accessories, 45 ACP case gage.
Check Stock

.626-.750\ Minus Tolerance Pin Gage Set

  • Gage increments are in .001" steps Minus tolerance: +0/-.0002". Fully hardened to 60-62 RC. Each gage is inspected and has a 10 Micron finish or better. Complete with plastic, element-proof fitted case..
Check Stock

Fowler 53-646-000-1, Inch Bore Gage Setting Master Kit

  • Accurate Measurements: Used for accurately setting any bore gage up to 6" in diameter to an accuracy of 0.0001".
  • comes with a base anvil of 2.750" x 0.80" and 2 adjustable anvils of 2.375" x 0.375".
  • Bore Gage Capacity: This bore gage master has an internal capacity of 6.
Check Stock

MC-1-M .061-.250\ by .001\ Minus Tolerance Pin Gage Set - 190 Gages

  • Gage increments are in .001" steps Minus tolerance: +0/-.0002". Fully hardened to 60-62 RC. Each gage is inspected and has a 10 Micron finish or better. Complete with plastic, element-proof fitted case..
Check Stock

Forster Products Sammi Dimensioned Headspace Gage, Rimless, Hardened Steel, Precision Ground, 350 Legend, NO-GO

  • 350 LEGEND: Use to check headspace of 350 Legend..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference betwee....
Check Stock

Forster Products 223 Remington NOGO Headspace Gage

  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
Check Stock

Telescoping Gauge Gage Set Tools 6 Pcs 5/16'' - 6'' Range Micrometer Precision T-Bore Hole Gauge

  • Multispecification measurement range, 6 piece Telescoping Gage Set, can detect hole (or slot) ID 5/16 "-6"(8mm-150mm).
  • Telescoping Gage Set INCLUBE:A - 8 To 12.7 mm 5/16 "To 1/2".
  • The Telescoping Gage Set is a stainless steel material that prevents rust and extends the life of the Telescoping Gage Set, a satin chrome plated surface that includes the case, contact points of hardened tool steel, Telescoping spring, with a knurled locking knob and a knurled holding area..
  • Easy-to-adjust to allow the most pinhole gauge on the retractable gauge to enter, groove and groove up to 6 inches deep..
Check Stock

Forster Products 30-06 NO GO Headspace Gage

  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement..
  • If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
Check Stock

All Industrial 55122 | 3 Sets M0/M1/M2 490 Pcs .011-.500 Plug Pin Gage Set Minus

  • Number of pin gages: 490 (3 boxes- M0, M1, & M2 sets).
  • Gage increments are in .001" steps Minus tolerance: +0/-.0002". Fully hardened to 60-62 RC. Each gage is inspected and has a 10 Micron finish or better. Complete with plastic, element-proof fitted case..
Check Stock

COLIBROX 32 PC 17/64-1/2'' Radius Gage Set Steel Precision Gauge Set Machinist Tool

  • Made from the finest quality steel available.
  • Each gage has leaves for measuring surfaces for convex and covace radii.
  • Useful for tool and die makers, machinists, screw machine operators and other mechanics to layout and check radii of tools, dies, etc..
Check Stock

Fowler 52-438-777-0 Gage Ball Set, 50 Pieces

  • Ball gage: Features sphericity within 0.000025" and surface finish to 1.5 microinches.
  • Accurate Readings: Chrome steel ball set with Grade 24 accuracy and AFBMA certificate.
  • Durable Material: This gage ball set is made of ground-lapped chrome steel hardened to 63RC.
  • Set Includes: A case for storage and ball pair sizes of 0.125, 0.14, 0.156, 0.18, 0.21, 0.25, 0.28, 0.31, 0.34, 0.375, 0.4, 0.43, 0.46, 0.5, 0.53, 0.56, 0.59, 0.625, 0.656, 0.68, 0.71, 0.75, 0.81, 0.87, 0.93, and 1 inch.
Check Stock