ReviewsAir Hose Manifold

1/4\ BSP Female 2 Way 4 Port Solid Aluminum T-Shape Pneumatic Fitting Air Manifold Block Splitter

  • The bar manifold can be mounted on a wall or work bench, safely distributing four hose lines to a work area.
  • Maximum working pressure is 300 psi at ambient temperature (70 degree F).
Check Stock

OTC Water Pump Holding Tool

  • ...tic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage..
  • A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time..
  • Thermometer uses stainless steel material, with scale range 0 - 200℃(32 - 400℉). Blue plastic case k....
Check Stock

R134a Digital Manifold Gauge Set HVAC for Testing Maintaining Air-Conditioner, Vacuum Pressure Temperature Leakage A/C Refrigeration Tester with Built-in 90 Refrigerants

  • [Ideal A/C Maintaining Tool] a/c manifold gauge adopts the most advanced digital circuit and the high precision pressure sensor(Accuracy: 0.5%). Widely used Automotive Air Conditioner, Household Air Conditioner, Refrigerating Chamber and Refrigeration Plant. Real-time test of pressure got relative temperature which can help you more convenient for refrigeration system installation or servicing..
  • [Three Working Modes] R410a manifold gauge set comes with three common working modes: refrigerant pressure mode, vacuum percentage mode, leak detection mode. Equipped with real-time vacuum pressure test and percent indicate. Test range: 0 KPa~6000 KPa. Operating temp: -20℃~60℃（-4℉-140℉) . But the manifold gauge cannot measure micron..
  • [Built in 90 Refrigerants] ac diagnostic manifold gauge set built-in 90 refrigerants and corresponding temperatures sheet data according to the US NIST standard.(R11 R13 R113 R114 R115 R116 R12 R123 R124 R125 R1270 R134A R14 R141B R142B R143A R152A R170 R21 R218 R22 R410A etc.).
  • [Powerful Function] a/c r134a manifold gauge set equipped with auto power off function, unit conversion and backlight function. By default,the system automatically powers down after 10 minutes of inactivity. Users can configure on cancel the auto ....
Check Stock

WYYDS 4CFM 1/3HP Single-Stage Vacuum Pump and R410A R22 R134A R404A Aluminum-Body Manifold Gauge Set Refrigeration Kit with Carrying Tote for HVAC A/C Refrigeration Recharging and Maintenance

  • [High-quality Vacuum Pump] Our vacuum pump is designed to have high efficiency and low noise for maintaining air conditioning systems. The aluminum housing makes the pump light-weight and durable, the thermally protected motor is applicable for long-term operation..
  • [Multi-functional Manifold Gauge] Our manifold gauge is designed to measure the pressure of the equipment accurately and repair air conditioning systems. The good-quality gauge improves the reading accuracy largely. It is suitable for R410A R22 R134A R404A..
  • 【Durable Accessories】The vacuum pump handle conforms to ergonomics which provides the advanced comfort and portability. A simple oil fill port with a clean oil drain plug makes the oil change easy. And the gloves can help protect your hands during operation..
  • [Three-color Hoses and Refrigerants Application] Three-color hoses are installed with brass fittings. Different colors are designed to help identify high pressre, low pressure and the filling hose. The working pressure of hose is 800PSI-4000PSI..
  • [Complete Package List] It includes 1* 4CFM Vacuum pump, 1* Manifold gauge, 1* Carrying tote.
Check Stock

JIFETOR 3 Way AC Manifold Gauge Set, HVAC Diagnostic Refrigerant Charging Tool for Auto Household R404A R134A Refrigerant, Quick Couplers Adapter Valve Core Tool (3FT Hose, Can Tap, Blue Case)

  • AC MANIFOLD GAUGE: 3 way double movement brass manifold auto AC gauge, durable and anti-corrosion. Blue low pressure gauge with range -30inHg~250PSI, and red high pressure 0~500PSI, Celsius unit. 2-3/4″ easy to read large dial with color coded scale, and sight window on the manifold help to monitor refrigerant charging and recovery better and easily. Built in calibration screw and no-flutter pointer ensure measurement accuracy. Perfect for R404A R134A.
  • 3 3FT COLOR CODED HOSES: Refrigerant charging kit uses rubber nylon resin hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is 2500PSI. Each side is loaded with 1/4″ female brass fittings for easy connection. Red hose connects red gauge side 1/4″ male flare to red quick coupler, blue to blue, and yellow hose connects AC gauge middle charging port to can tap or vacuum pump.
  • AC R134A QUICK COUPLERS: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with R134A service port. Connect the blue coupler to AC suction service port and the red one to AC discharge service po....
Check Stock

5 Way Air Manifold Block, SHENGYIG 1\\/4 Air Compressor Splitter with 3 x 8 MM and 2 x 6 MM Pneumatic Connectors, 2 Hex Plugs and 5 Pipe Plugs, for Air Tools

  • ☞ High-Quality Material: Air manifold block is made of high-quality aluminum alloy, with tin-plated surface, anti-rust and anti-corrosion, safe and beautiful for long-term use!.
  • ☞ Professional Standard: This equipment is specially designed for supplying various air tools at the same time, these connectors have high precision threads to ensure tight connection and good sealing performance..
  • ☞ Complete Accessories: Air hose splitter is equipped with 2 1/4" x 6mm pneumatic hose connectors and 3 1/4" x 8mm pneumatic hose connectors, 2 1/4" hexagon female connectors, very convenient!.
  • ☞ Wide Range of Uses: The air compressor splitter is specially designed for quick connection, suitable for compressed air, neutral gas and water, often used to connect pneumatic devices and air hoses, and is suitable for multiple tools that simultaneously distribute air..
  • ☞ Quality Assurance: The air hose splitter complies with strict quality control standards, has been tested many times before leaving the factory, and the quality is guaranteed, you can use it with confidence..
Check Stock

YSTOOL Cylinder Leak Down Tester Automotive Kit Gasoline Engine Compression Dual Gauge Leakdown Detector Tool Set for Pressure Check & Leakage Rate Test with Extension Rod Red

  • ...m 0-100 psi / 0-7 bar and 0-100%(Accuracy: ±0.5%), easy to read 3-inch gauges would spend less time on readings. Leakdown gauge tool hooks up to air compressor(prepare by yourself) can help to detect common engine faults such as worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets..
  • Gauge manifold assembly also equipped with 18" rubber hose, AR2000 pressure regulating valve, American type air plug and aluminum manifold body. Valve knob is made of alloy and plastic, used for pressure adjustment of the inputed air from the air compressor. Pull out for use, and push back to lock. This leak down compression tester & cylinder leakage test kit fits for most gasoline engines with spark plugs(within 20mm)..
  • Constructed with aluminum and rubber, straight / angled type universal push-on connectors don't need to be threaded into spark plug wells and applicable to almost all petrol engines, and M14 aluminum extension rod can be installed on long / short hose(41-3/4".
  • 11-1/2") end to increase distance and facilitate operation. Adapter sizes: M14*1.25, M18*1.5, M10*1, M12*1.25. High quality and deep threads allow the fittings to bite better, antislip and durable..
  • Long & short rubber hoses feature 300 psi W.P and brass adapters at both end....
Check Stock

71pcs Air Condition Repair R134a AC Hose Seal Kit Universal Air Conditioning Recharge Hose Adapter Assortment Of Valve Cores Hose Gaskets Valves Repair Tool

  • A/C recharge hose gasket abrasion resistance, corrosion resistance.
  • Universal refrigeration AC manifold gauge hose rubber gasket.
  • Auto's A/C air conditioning valve core remover tool assortment kit.
  • Universal air-conditioning A/C recharge hose liquid feeding tube adapter grommet gasket.
  • Valve core tool, dual style, good for small & large valve cores.
Check Stock

Air conditioning Refrigerant Charging Hoses with Diagnostic Manifold Gauge Set and 2 Quick Coupler for R410A R22 R404 Refrigerant charging,1/4' Thread Hose Set 60' Red/Yellow/Blue (3pcs)

  • ★ 60 inch long,1/4 inch yellow,blue,and red hoses feature a 800 PSI working pressure and 4000 PSI burst pressure – ideal for standard refrigerants.
  • ★ Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
  • ★ Manifold with built-in sight glass. Durable metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16″ SAE，refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge bundle refrigerant liquid hose.
  • ★ refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4″ SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system.
  • ★100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.
Check Stock

Refrigerant Charging Hoses with Diagnostic Manifold Gauge Set for R410A R22 R404 Refrigerant charging,1/4" Thread Hose Set 60" Red/Yellow/Blue (3pcs) with 2 Quick Coupler

  • Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
  • Refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system.
  • Manifold with built-in sight glass. Durable metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16" SAE，refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge bundle refrigerant liquid hose.
  • Satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.
Check Stock

Digital Manifold Gauge Set Pressure&Temp Test HVAC Manifold Pressure Leak Test Digital Refrigerant Gauges Vacuum HVAC Gauges with Refrigerant Hoses&Temperature Clamps&LCD Display for Air Conditioning

  • 1.[ For Refrigeration Equipment ]：The digital manifold hvac gauge is used to assist in the installation, testing and maintenance of refrigeration equipment such as air-conditioning and cold storage. It has outstanding features such as dual pressure test, dual temperature test function, digital reading, multi-unit switching, and built-in refrigerant database. Note: The temperature measured by the device is allowed to have a deviation of 3% from the actual temperature..
  • 2.[Built-in Refrigerant Database ]：Digital manifold gauge set hvac has a built-in database of 89 refrigerant pressure-evaporation temperature. Before you fill refrigerant, you can set different types of working refrigerants according to the car needs to fill. Digital manifold gauge set also calculates the degree of subcooling and superheat, which is convenient for direct reading of the operating process data. It also tests the percentage of vacuum measurement,pressure leak measurement..
  • 3.[ Dual Pressure & Dual Temperature Measurement ]：The digital manifold gauge set can measure dual pressure and dual temperature simultaneously to help you determine the cooling capacity of your refrigeration system. The lower the evaporating (Ev)/condensing (Co) pressure and temperature, the more ef....
Check Stock