ReviewsAir Plasma Cutting

Amico PT-31-20 20 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 20 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

AMICO PT31-13 13 ft Plasma Torch Gun PT-31/LG-40 For CUT-30/40 CTS-160/180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • [DEEP CUTTING CAPACITY & FAST SPEED CUT] Our Re-Engineered High-Performance Plasma Cutter is So Robust, It Can Cut Up To 1/2" Inch Of Thick Steel ! Optimal Cut: 8mm Thick Steel, Max Rated Clean Cut Thickness Cut: 12mm Thick Steel (at 35A 110V 60 PSI), Maximum Severance Cut: 14mm Thick Steel (at 50A 220V 70 PSI) With Cutting Speeds Exceeding 100 Inches Per Minute Our Plasma Cutting Machine Is Extremely Fast.
  • Making It The Most Efficient Way To Cut Metal At Home Or For DIY Hobby Projects..
  • [CUTS LARGE VARIETY OF METALS] Our Plasma Cutter Uses High-Velocity Ionized Gas To Create a Flame Making it Capable of Cutting Any Electrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect....
Check Stock

W.S SL40 Consumables Kit Electrode Tip Standoff for Thermal Dynamics Cutmaster 42 Plasma Cutter Torch 9-0093 9-0096 9-8251 QTY-22 Copper

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch Consumables.
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0093, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Reboot Plasma Cutter IGBT Inverter 40 Amps RBC-4000 AC 110V Air 1/2 Cutting Plasma Cutting High Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome-Blue

  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality....
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting....
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time....
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 5 pcs tips, 5 pcs electrodes, 2 meters air hose, 4 pcs....
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems.
Check Stock

SPRIGHOLLY plasma cutter 50A Dual Voltage 110V/220V Compact Metal Cutter 1/2\ Quality cut plasma cutting equipment high frequency CUT50 3 year warranty black IGBT Inverter machine

  • 【OUTPUT & PERFORMANCE】 At 220V, 10-50A DC output, clean cut 1/2" and maximum cut 3/4".
  • at 110V, 10-50A DC output, 1/3" ideal clean cut and maximum cut 2/5". ( Please note: the thickness of the cut depends on the material).
  • 【Fast cutting in only three steps】Built-in automatic drain air regulator, you only need to connect the air compressor, plug in the power supply and the plasma cutting torch, and you can start working. And there is no need to worry about drainage and regulating gas.Very convenient！.
  • 【Energy Saving & Multi-protection】 The cutting machine adopts IGBT inverter technology, which features with current control, high quality and stable performance, so the energy consumption is also greatly reduced. With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way..
  • 【Easy Cut】Equipped with advanced AG60 torch to reduce loss and extend service life. With your SPRIGHOLLY Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat,and produces minimal slag. Designed for both demanding industrial and construction work, or home and hobby use. Our high-quality Pl....
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock