ReviewsAir Plasma Cutting Torch

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

ICE-60T/TM Plasma Torch Electrode Tip 212724 219676 Drag Shield 212730 for Miller Spectrum 875 Cutter 35pcs

  • 35pcs Plasma cutting consumables kit equivalent to Miller Spectrum 875 cutter ICE-60T ICE-60TM plasma cuttin torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 20pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

Plasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs

  • 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
  • CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 10pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

WeldingStop 0.9mm Contact Tip IPT-60 PT-60 electrode drag shield retaining cup 30-40A plasma cutting nozzle 23pcs

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 10pcs Electrodes + Tips and 1pc Retaining Cup + 2pcs Drag Shield.
  • There are 23pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop 9-0093 9-0096 Plasma Electrode Tip for Thermal Dynamics CutMaster 42 Cutter SL40 Torch PK-40

  • These plasma electrodes and tips can fit Thermal Dynamics CutMaster 42 Cutter and SL40 Plasma Cutting Torch.
  • There are total 40pcs of plasma cutting SL40 torch conusables in the package.
  • The plasma electrodes and tips are replacement parts, NOT Thermal Dynamics Original plasma consumables.
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...rials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectivel....
Check Stock

PD0088-12 PD0019-12 Drag Tip Kit for Eastwood Versa-Cut 40amp Plasma Cutter Consumables 34pcs

  • 34pcs Plasma cutting consumables kit equivalent to Eastwood Versa-Cut 40amp plasma cutter PLTrafimet CB50 torch consumables, aftermarket replacement, not original.
  • PD0088-12 Plasma tip / nozzle x 10pcs, drag tip,diameter 0.047in / 1.2mm.
  • PD0019-12 Plasma tip / nozzle x 10pcs, diameter 0.047in / 1.2mm.
  • PE0007 Plasma air diffuser x2pcs,PC0003 Plasma outside nozzle x 2pcs.
Check Stock