ReviewsAir Separator

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 50 CFM GOOD FOR 10HP & 15HP COMPRESSORS WITH PRE-FILTERS

NEW 50 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 50 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 75 CFM GOOD FOR 15HP & 20HP COMPRESSORS WITH PRE-FILTERS

NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN) 11oz METAL BOWL.
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES 99.98% REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH 11oz METAL BOWL AND INTERNAL FLOAT DRAIN (AUTO DRAIN).

Check Stock

Dust Right Dust Separator + 36” Flex-Form Hose - Cyclone Dust Collector Separates Sawdust Wood Chips Debris and More – 10-Gallon Translucent Bucket - Dust Collectors for Woodworking for Shop Vacs

Dust Cyclone Separator: Turn any shop vacuum with a 2-1/4” ID outlet into a 2-stage dust extractor and wood chip separator. Our dust cyclone separator captures sawdust, wood chips, and other debris before it enters your vacuum, preventing the loss of suction power caused by a clogged vacuum filter..
Durable Filter Life: This dust extractor for woodworking extends the life of your filter and impellers by extracting the larger debris before it enters the dust cyclone separator. The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters..
Adapting Mounting: The five-caster base of the dust collector bucket makes it exceptionally stable and easy to maneuver around the shop. Our dust collector vacuum hoses connect inside the in/out ports, preventing unintentional disconnections..
Maintain Airflow: The dust collector creates a cyclonic airflow that causes most wood dust particles and other materials that are heavier than air to separate, and our woodworking dust collector prevents them from being passed to the vacuum..
Efficient Dust Collecting: Our 10-gallon translucent dust collector bucket is easy to empty and easy to tell when it's full. Also, this dust collection separator holds twice the capacity of competitor ....

Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

HPDMC 10HP Rotary Screw Air Compressor Spin-on Oil Separator 39CFM@125psi 208-230Volt, 3- Phase Skid Commercial Air Compressed System

【Parameters】 Power: 10HP；208-230-Volt, 60Hz, 3- Phase；Working Pressure : Max 125 psi /8 bar；Air Flow : 39cfm；Motor RPM : 3600..
【Simple installation】HPDMC compressors are equipped with easy-to-use, robust and intelligent microprocessor controllers, long-lasting and efficient transfer system,is the leading rotary screw compressor for industrial applications..
【Stable and Durable】Spin-on Air Oil Separator is an integrated separator with element and its own housing. It offers an easy and quick replacing solution for maintenance of air compressors. It significantly reduces oil content of compressed air and returned the filtered oil to compressor air end..
【Service ability】 Service-friendly design implemented using a layout that provides instant access to all consumable items, with quick-release and hinged protective covers and easy-to-use controllers minimizes downtime and reduces maintenance costs..
【Application】 It can widely used for production, pharmaceutical, textile, auto repair, aviation, metallurgical and other industrial fields, can used safely in all applications of small and medium sized businesses..

Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR, COMPRESSED AIR SYSTEMS, 75 CFM, GOOD FOR 15HP & 20HP COMPRESSORS (STAND ALONE DRYER)

NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
PLEASE NOTE:: YOU MUST USE A MINIMUM 1 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECt OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER + STAGE 2 COALESCING FILTER FOR OIL. IF YOU NEED FILTER AND AIR PRESSURE REGULATOR, PLEASE SELECT "WITH REGULATOR PRE-FILTER" FROM THE ABOVE LINK..
75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 GAUGE / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
220 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 29.25" ) ( WIDTH 13.9" ) (LENGTH/DEPTH 16.9") / 75 LBS.

Check Stock

Industrial Service Solutions Aftermarket Quincy 129881 Air/Oil Separator | High-Efficiency Media | Replacement Part | for Compressed Air Equipment & Systems

IMPROVED FILTRATION FOR MAXIMIZED EFFICIENCY - This AOS removes oils from the air being sent to the engine to prevent it from getting into the intake system, ensuring your machine operates efficiently and simplifying maintenance of your equipment..
COMPATIBLE WITH DIFFERENT EQUIPMENT - The 129881 Air/Oil Separator is compatible with various compressed air filters and systems. Designed to fit and match the specifications of your original equipment, offering equal or better performance..
HIGH-GRADE CONSTRUCTION BUILT TO LAST - Featuring steel metalwork, nylon end-caps, and metal-to-metal welding, our air/oil separator lasts longer than generic parts. Holds its shape under pressure and maintains coverage of maximum surface area..
COMES WITH MANUFACTURER'S WARRANTY - A cost-effective alternative to the original brand part, our AOS replacement comes with manufacturer's warranty that matches or exceeds the original OEM warranty..
RELIABLE SOLUTIONS IN DEMANDING APPLICATIONS - Our innovative products provide a more cost-effective solution than brand name parts to increase productivity and efficiency across industries, helping our customers be successful in what they do..

Check Stock

Industrial Service Solutions Aftermarket Quincy 129908 Air/Oil Separator | High-Efficiency Media | Replacement Part | for Compressed Air Equipment & Systems

IMPROVED FILTRATION FOR MAXIMIZED EFFICIENCY - This AOS removes oils from the air being sent to the engine to prevent it from getting into the intake system, ensuring your machine operates efficiently and simplifying maintenance of your equipment..
COMPATIBLE WITH DIFFERENT EQUIPMENT - The 129908 Air/Oil Separator is compatible with various compressed air filters and systems. Designed to fit and match the specifications of your original equipment, offering equal or better performance..
HIGH-GRADE CONSTRUCTION BUILT TO LAST - Featuring steel metalwork, nylon end-caps, and metal-to-metal welding, our air/oil separator lasts longer than generic parts. Holds its shape under pressure and maintains coverage of maximum surface area..
COMES WITH MANUFACTURER'S WARRANTY - A cost-effective alternative to the original brand part, our AOS replacement comes with manufacturer's warranty that matches or exceeds the original OEM warranty..
RELIABLE SOLUTIONS IN DEMANDING APPLICATIONS - Our innovative products provide a more cost-effective solution than brand name parts to increase productivity and efficiency across industries, helping our customers be successful in what they do..

Check Stock

Industrial Service Solutions Aftermarket Quincy 2013402030 Air/Oil Separator | High-Efficiency Media | Replacement Part | for Compressed Air Equipment & Systems

IMPROVED FILTRATION FOR MAXIMIZED EFFICIENCY - This AOS removes oils from the air being sent to the engine to prevent it from getting into the intake system, ensuring your machine operates efficiently and simplifying maintenance of your equipment..
COMPATIBLE WITH DIFFERENT EQUIPMENT - The 2013402030 Air/Oil Separator is compatible with various compressed air filters and systems. Designed to fit and match the specifications of your original equipment, offering equal or better performance..
HIGH-GRADE CONSTRUCTION BUILT TO LAST - Featuring steel metalwork, nylon end-caps, and metal-to-metal welding, our air/oil separator lasts longer than generic parts. Holds its shape under pressure and maintains coverage of maximum surface area..
COMES WITH MANUFACTURER'S WARRANTY - A cost-effective alternative to the original brand part, our AOS replacement comes with manufacturer's warranty that matches or exceeds the original OEM warranty..
RELIABLE SOLUTIONS IN DEMANDING APPLICATIONS - Our innovative products provide a more cost-effective solution than brand name parts to increase productivity and efficiency across industries, helping our customers be successful in what they do..

Check Stock

FYPower 22 Pieces Air Compressor Accessories kit, 3/8 inch x 25 ft Hybrid Air Hose Kit, 1/4\ NPT Quick Connect Air Fittings, Tire Inflator Gauge, Blow Gun, Air Filter, Swivel Plugs

➤ Advanced Air Compressor Tool Kit – This 22-piece compressor accessory set includes a long 25ft hybrid air hose, tire inflator gauge, heavy duty blow gun nozzles, Air Filter Water Oil Separator, swivel plugs, couplers, inflation needles, and more..
➤ Heavy Duty Craftsmanship – Designed for personal or professional-grade mechanic use, our fittings, connectors, plugs, and tools are crafted with premium brass, rubber PVC, and corrosion-resistant steel, respectively..
➤ Flexible, Lightweight Hybrid Air Hose – Offering more control and versatility over a standard air compressor hose, our 3/8” x 25ft hybrid hose with ¼” FNPT and MNPT couplers offers 300 PSI of stable pressure..
➤ Universal Accessories and Attachments – We’ve also provided all the small details to suit your air compressor needs, including tire inflator gauge, Air Filter Water Oil Separator, swivel plugs, heavy duty blow gun with safety and tapered nozzles, rubber tip, couplings & plugs, and PTFE tape..
➤ Trusted 1-Year Warranty – Here at FYPower we pride ourselves on creating the highest-quality tools and accessories possible, which is why we back every order by responsive customer service and a 1-year manufacturer’s warranty..

Check Stock