ReviewsAir Suspension Damper

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Dundas Jafine DRB4XZW Recessed Dryer Vent Box, 4\

  • Spring loaded damper system offers complete noise control with no flapping louvers or dampers during inclement weather.
  • When the dryer, bath fan, or exhaust is turned on, the air forces the damper open allowing the air to exhaust..
  • When appliance is turned off, the damper is pulled to a secure, closed position.
  • UV resistant coating to prevent the cap from discoloring.
  • Paintable to match the exterior of your home.
Check Stock

CONHIS MOTOR Bicycle Air Suspension Front Fork DNM USD-8S Triple Crown DH Downhill Mountain Bike Fork 110 x 20mm Wheel Axle for 24'' 26" and 27.5" Dual Disc Brake

  • ✨✨Three In One--This front fork has combined three different sizes of front fork into one, which is compatible with 26/27.5/29 inches, which means that you do not need to carefully compare the size of the bike to choose the correct front suspension..
  • Lightweight Design--FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping..
  • Hydraulic Damping System--The hydraulic damping system is inside the front fork right tube, that is, damping force generated by reciprocating motion of piston and valve plate in hydraulic oil is used to suppress vibration and impact caused by acceleration and deceleration of vehicles and road bumps. The internal damper adopts wear-resistant, low freezing point,special oil for high quality shock absorber to ensure the damping stability and reliability..
  • ⭐⭐Alloy Steel Spring Design--High strength alloy steel spring design is used inside the front suspension left tu....
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

DNM Mountain Bike Air Rear Shock with Lockout 190mm

  • PRODUCT SPECIFICATION: Adjustments Rebound / Lockout / Air Pressure Adjustable, Damper shaft Dark hard-anodized AL-7075 Ø 10 mm (0.39 inch) shaft. Dark hard-anodized AL-6061 shock body.Riding style XC /TRAIL, Available Size Eye to Eye x Travel 165 x 35 mm ( 6.50 x 1.38 inch) 190 x 50 mm ( 7.83 x 1.97 inch) 200 × 55 mm ( 7.87 × 2.17 inch) Weight: 0.4 KG(0.88 Ib) for 165 mm Lenght.
  • EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
  • Rebound Adjustment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 1....
Check Stock

W10780048 Washer Suspension Rod Kit by Beaquicy - Replacement for Whirlpool Ken-more Washing Machine - Package Includes 4 Suspension Rods and Ball Cups

  • ✅【PERFECT SUBSTITUTE】- Package includes 4 x W10780048 Washer Suspension Rod, 4 x suspension balls and 4 x suspension ball housing.①These rod/spring assemblies are approximately 23.6 inches in length.②The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.③The W10780048 Washer Suspension Rods Damper is made of premium quality material,the rod surface is coated to prevent rust..
  • ✅【WIDE COMPATIBILITY】- W10780048 Washer Suspension Rod Kit can work for Whirlpool, Ken-more, Roper, Admiral, Amana, Crosley Washing Machine.Replaces part numbers W10257087, W10257088, W10349191, W10349193, W10748952, W10821948, 4185114, AP5971398, EAP11703290, PS11703290, etc.If you are not sure if your washing machine model is suitable, please contact us!.
  • ✅【365 DAYS WARRANTY】- The product W10780048 Whirlpool Suspension Kit supports 1 YEAR return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

DNM Mountain Bike MTB Air Rear Shock Rebound/Remote Lock Out/Air Compression Pressure Adjustable AL 7075 Shaft/AL 6061 Shock Body 165mm Travel 35 mm/w Extra Bushing Hardware

  • 308g =0.68lbs (210mm). Remote lock out cable length: 1750mm=68.9inch..
  • COURTESY BUSHING HARDWARE INCLUDED: Top Busing Size : 8mm x 24mm. Bottom bushing size : 8mm x 24mm. We have included an additional set of bushing hardware (8mm x 50mm) to fit bikes with different suspension systems..
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 150 Psi, Negative air chamber 70 Psi.Weight 220 lbs - Main air chamber 165 Psi, Negative air chamber 75 Psi..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide one year warranty ! Made in Taiwan..
Check Stock

DNM Mountain Bike MTB Air Rear Shock Rebound/Remote Lock Out/Air Compression Pressure Adjustable AL 7075 Shaft/AL 6061 Shock Body 210mm Travel 53 mm/w Extra Bushing Hardware

  • 308g =0.68lbs (210mm). Remote lock out cable length: 1750mm=68.9inch..
  • COURTESY BUSHING HARDWARE INCLUDED: Top Busing Size : 8mm x 24mm. Bottom bushing size : 8mm x 24mm. We have included an additional set of bushing hardware (8mm x 50mm) to fit bikes with different suspension systems..
  • Weight 120 lbs - Main air chamber 90 Psi. Weight 140 lbs - Main air chamber 105 Psi. Weight 160 lbs - Main air chamber 120 Psi. Weight 180 lbs - Main air chamber 135 Psi. Weight 200 lbs - Main air chamber 150 Psi. Weight 220 lbs - Main air chamber 165 Psi..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide one year warranty ! Made in Taiwan..
Check Stock

maXpeedingrods Coilovers for Subaru Impreza WRX GC8 1993-2001 Shock Absorber Suspensions Lower Kit Coil Springs Adjustable Height

  • Fit for Subaru Impreza WRX GC8 1993 1994 1995 1996 1997 1998 1999 2000 2001 GC8A GC8B GC8D GC8E GC8F GC8G.
  • Note: Please confirm your chassis is GC8 or....
  • Front Spring rate: 10 kg/mm (560 lbs/in).
  • Rear Spring rate: 6 kg/mm (336 lbs/in​).
  • Adjustable Camber Plate: Yes (Front Only).
  • These coilovers are able to have their height adjusted without being taken out of the car, able to lower ride height by 1''-3'', allows user to have a....
  • Pillow ball top mount: This design helps combat noise while tuning and improves the steering feel and response.
  • Suspension lowering kit is a fast and....
Check Stock

Draft Blocker 6 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector 6 Inch

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring....
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC....
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal....
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from....
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are....
Check Stock

DNM Damping 3 System Mountain Bike Air Rear Shock Rebound/Lock Out/Air Pressure Adjustable AL 7005 Shark/AL 6061 Shock Body 165mm (6.5\) x 35mm

  • PRODUCT SPECIFICATION: Adjustments Rebound / Lockout / Air Pressure Adjustable, Damper shaft Dark hard-anodized AL-7075 Ø 10 mm (0.39 inch) shaft. Dark hard-anodized AL-6061 shock body.Riding style XC /TRAIL, Available Size Eye to Eye x Travel 165 x 35 mm ( 6.50 x 1.38 inch) 190 x 50 mm ( 7.83 x 1.97 inch) 200 × 55 mm ( 7.87 × 2.17 inch) Weight: 0.4 KG(0.88 Ib) for 165 mm Lenght.
  • EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
  • Rebound Adjustment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 1....
Check Stock