ReviewsAir Tank Gauge Kit

3 Trumpet Train Air Horn Kit - Fits Almost Any Vehicle Truck Car Jeep or SUV Includes Three Chrome Trumpets with All-in-One Air System 110 PSI 12-Volt Air Compressor Tank & More Complete Kit

✅ Chrome Compact Triple Air Horn (Dimensions: 13.75"L x 7"W x 6.5"H) w/ 12v Electronic Solenoid.
✅ All-in-one Air System w/ 110 PSI Compressor & 3 Liter Air Tank (Dimensions: 15.75" L x 5.25" W x 6.0" H).
✅ Kit includes a pressure switch (85 PSI on/105 PSI off), 12 ft of 1/4" air line, push button switch. Wiring kit: 12 feet of 10 gauge power wire, 15....
✅ *The compressor in this kit MUST be installed in a clean and dry location. Failure to do so will void the product's warranty..

Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..

Check Stock

Upgraded 60in Fit for Soda Stream Adapter Hose Kit with Pressure Gauge CGA320 to TR21-4 Soda Maker Co2 Tank Direct Adapter Hose Maximum Working Pressure 4500PSI

Upgraded design: 3000psi pressure gauge and exhaust valve can monitor the working pressure of the hose at any time, know the gas pressure in the tank....
Applicable: Standard CGA-320 external hose can be used for large CO2 storage tanks (including CGA-320 in the United States, Canada, Brazil, Colombia,....
Material: The 60in fit for soda stream adapter hose kit is made of stainless steel and solid brass, resistant to high pressure, high temperature,....
Big Pressure Gauge: The fit for soda stream adapter is equipped with Big Pressure Gauge, which is convenient to observe the air pressure during use....
Easy to use: Upgraded 60in fit for soda stream adapter hose kit is easy to install, plug and play.

Check Stock

PatioGem Propane Tank Gauge, Gas Grill Gauge for 5-40lbs Propane Tank, 3 Temperatures Scale, Colored & Reliable, Propane Tank Gauge Level Indicator, Propane Gas Gauge, for Grill, Heater, Fryer, Camper

COLORED & RELIABLE GAS MONITOR – Colored reading allows you to check the gas level at a glance. Needle in the green area means sufficient gas, yellow means low gas, and red means nearly empty gas. By detecting air pressure, the propane tank gauge measures the remaining capacity of the propane. This propane gauge can also be used to observe leakage..
QCC TYPE 1 INLET/QCC&POL FEMALE OUTLET – propane tank gauge level indicator’s inlet is QCC TYPE 1 for 5-40lb DOT. Outlet universal connection for QCC female and POL female. Great gadget for a gas grill, heater, smoker, camp stove, lantern, tabletop grill, fire pit table, turkey fry, and other gas appliances..
ADAPT TO DIFFERENT TEMPERATURES – As ambient temperature changes, the pressure in the tank will change, to adapt to different climates, this PatioGem propane gauge for tanks has 3 scales for hot days(≥ 68°F), cool days(≥50°F, ≤68°F) and cold days(≤50°F), always providing an accurate reading for your gas level. It won’t be leading to wrong results by temperature changes like other common propane gauges..
100% BRASS MADE – PatioGem propane cyli....

Check Stock

STEALTH Air Tank, 10 gallon High Pressure Air Tank with Maximum 225Psi Pressure, Ideal For Inflation Jobs, Blue-Saa-110T

▲【POWERFUL PERFORMANCE】Large capacity with10 gallon ,high pressure maximum 225psi pressure to provide strong motivation for your tools, Configured 4pcs quick coupler simultaneously meet multiple tools different needs at work.
▲【PRECISE GAUGE】With tank and tool gauges dual meter ,Design the display up ward facing gauge ,makes reading the gauge easy and convenient.
▲【EXCELLENT DESIGN】Integrated tank welding machine design bringing ultra-high use safety ,The sewage outlet design can discharge sewage and increase the service use life.
▲【EASY AND SAFE MOVE 】Saa-110T air tank the weight only 40.8lbs easy to move,Both the handle and the bottom bracket are made of non-slip design to ensure the stability of the device during use.
▲【WHAT YOU WILL GET】Air tank x 1 User manual x 1, Lifetime warranty committed by our friendly and quick-response customer service.

Check Stock

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
Torch Handle with rear control valve for accurate gas control and positive shutoff.
Acetylene Regulator for MC Tank with protective rubber gauge boot.

Check Stock

TCP Global 5 Gallon 20 Liters Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid Caster Wheels Regulator Gauge - Use for Curing Resin in Casting Molds

Professional heavy-duty 5 gallons (20 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds....
The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 12.3" inside diameter and is 13"....
Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge....
The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless....

Check Stock

Relationshipware StratoLauncher IV Ultimate Tilting Water Rocket Launcher + StratoFins Kit

Easy to assemble metal water rocket launcher with a 125 PSI safety valve. Rocket will NOT fly straight without an aerodynamic nose cone made from a....
Kit includes StratoLauncher IV, StratoFins, ball head, pressure gauge, QConnect w/valve (tank not included). Watch assembly video on this listing at....
StratoLauncher IV Ultimate will propel a 2 liter plastic (PET) soda pop bottle over 350 ft. in the sky. Watch the last minute of the assembly video....
Supports most .5L, 1L, 1.25L, 1.5L, 2L soda bottles @ air pressures as low as 15 PSI up to 120 PSI..
Kit is fully upgradeable, expandable, & can be accessorized into a complete launching system for STEM..

Check Stock

Fafeims CGA347 Paintball Fill Station PCP SCBA Charging Connector Adapter with Hand Tight

?PERFORMANCE?The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use..
?APPLICATION?6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank. It is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..
?EASY TO USE?Knob type exhaust valve, the air outlet is very smooth. The hand tight CGA347 nut and nipple for connecting with SCBA(Fire fighting) tank..
?SIZE?24 inch long x 0.070 inch ID(DN2) micro-bore hose. The valve charging connector is made of sainless steel, which is sturdy and durable for long time use..

Check Stock

150DB 4 Trumpet Train Horns kit Super Loud Air Horn with 150 PSI 12V Air Compressor Air Horn Compressor Tank For Any Vehicle Trucks Car Jeep Or SUV

...rumpet air horn produces a loud roaring sound..
【150 PSI compressor】Automatic Safety Protection Design And Has A 3L Air Compressor, Which Will Automatically Stop Pumping When The Air Pressure Reaches 110Psi Inside. This compressor comes with built-in 0-150 PSI pressure gauge which is designed for any high-pressure air horns that require on-board air system. Equipped with built-in temperature switch with great performance. Will automatically shut off when air compressor goes over 80°C and restart when it gets back down to 70 °C..
【Package Include】 4 Trumpet Chrome Train Air Horn Kit-Complete Package(1 x 4-trumpet air train horn.
1 x sealing tape with Necessary hardware included) .The Kit Includes Basic Parts And Additional Sealing Tapes And Extra Hoses For Your Replacement And Other Use..
【Easy Installation】Flexible And Portable, Easily Detach It From One Vehicle To Another. the tips :Face to the mouth of the hose connector and then bind it clockwise with the sealing tape for 3-5 circles. Then tightly screw up it with the connector of compressor and horn.Premium Quality &....

Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks，Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

★【2.3LDiving Tank Package】The D23-A incorporates improvements to the diving package, including bottle head first stage valves and pressure gauges, as well as pressure tubes,and added some configurations to enhance the diving experience.The total weight of D23-A diving package is 4.6kg. It can be carried directly for short distances, and can be transported in the car if traveling..
★【Bottle top valve】: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure g....

Check Stock