ReviewsAir Tank Inlet Valve

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks,Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ...: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure gauge. You can fix the pressure gauge in the visual range to check at any time..
  • ★【Package content】:D23-A includ the following products:2.3Ldiving tank+Copper primary breather valve+Extension pressure gauge+Plastic secondary breathing valve *1.
  • ★【After-sales service】: 24-hour af....
Check Stock

NEWCOMDIGI Brine Shrimp Eggs Incubator, Hatchery for Artemia Eggs, Live Artemia Cysts Hatchery Kit, DIY Aquarium Fish Tank Hatch Tool for Fish Food (4 PCS Set)

  • ...ide or Outside Tank Use: Our brine shrimp hatchery kit is a more good looking and effective aquarium feeding tool. The ability to use it inside the tank with suction cups and outside the tank with the included stand. Just make sure the temperature is suitable..
  • ★ ☀❤ Easy to Use: Connect the air pump to the air inlet at the bottom of the incubator, inject the treated water to the standard water level in the incubator tank, and add about 10g sea salt to pre-dissolve, then add 3-5g brine shrimp eggs and adjust the appropriate air volume..
  • ★ ☀❤ Package Including: The 4 PCS Set package comes with 1 x check valve, 1 x suction cup fixed holder, 1 x shrimp incubator, 1 x hose. The 17 PCS Set comes with 1 x shrimp hatchery, 1 x black control valve, 1 x check valve, 1 x air stone, 1 meter of transparent air hose, 1 x shrimp trap, 2 x automatic shrimp feeders, 3 x brine shrimp straws, 6 x brine shrimp storage bottles. (shrimp egg is not included)..
  • ★ ☀❤ Satisfaction Guarantee: If you have the slightest problem with our product, please feel free to give us a message and we will help you solve your problems as soon as possible.We go out of our way to make sure every customer is happy and satisfied with our product and service..
Check Stock

IMXMI 3/4\ Tankbuddy Valve PumpBuddy High Flow Large Water Discharge 20mm Float Valve Double Water Level and Adjustable Water Level (TB20)

  • ...mise starting and stopping of running water or the pump system(Level difference accept Customization)..
  • 2.APPLICATION:water tank、water tower、water pool、Irrigation、 animaldrinking、Sprayequipment、swimmingpool etc..
  • 3.WORK PRINCIPLE:It fits easily through a thin walled tank or screws into a threaded tank inlet.As the tank empties,the float travels down the cord until it hits the level topper.The valve then opens immediately to give a full flow.As we discharge te water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down..
  • 4.ADVANTAGE:High flow, Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m, Keeps pump operation to a minimum, Valve Seal Access System for quick access to valve seal, Ideal for all makes and models of tanks, Available inlet sizes..
  • 5.Instruction is included in the package. You can install and use it according to the instruction. If you have any after-sales questions, please feel free to contact us..
Check Stock

IMXMI 1" Tankbuddy Valve PumpBuddy High Flow Large Water Discharge 25mm Float Valve Double Water Level and Adjustable Water Level (TB25)

  • 2.APPLICATION:water tank、water tower、water pool、Irrigation、 animaldrinking、Sprayequipment、swimmingpool etc..
  • 3.WORK PRINCIPLE:It fits easily through a thin walled tank or screws into a threaded tank inlet.As the tank empties,the float travels down the cord until it hits the level topper.The valve then opens immediately to give a full flow.As we discharge te water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down..
  • 4.ADVANTAGE:High flow, Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m, Keeps pump operation to a minimum, Valve Seal Access System for quick access to valve seal, Ideal for all makes and models of tanks, Available inlet sizes..
  • 5.Instruction is included in the package. You can install and use it according to the instruction. If you have any after-sales questions, please feel free to contact us..
Check Stock

Galaxy's Edge Star Wars Legacy Lightsaber (26' Lightsaber Blade)

  • Pack of 2 premium inflatable swords. Luke / Yoda green single blade design..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape. *For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
Check Stock

EXCELFU RV City Water Fill Inlet Flange Brass with Check Valve, RV Water Inlet Connection 1/2" NPT, City Water Inlet for RV Camper Motorhome Trailer Marine

  • RV City Water Inlet Replacement: Direct OEM replacement of rv city water inlet..
  • Specification of RV Water Inlet: The rv water inlet connection check valve is with 1/2" NPT male threaded pipe on the inside, 3/4" GHT female threaded pipe on the outside, flange thread is 3" diameter..
  • RV City Water Inlet with Check Valve: Built in check valve/back flow preventer and easy to install this city water check valve inside your RV's fresh water system, no more leaking when use tank and pump for water and save water for your RV..
  • Brass RV City Water Flange: The pipe threads of RV water fill inlet is constructed of durable solid brass instead of the plastic. Fine workmanship with precise thread to reduce leaks and resistant to rust, UV light, daily wear and road salts. Made to extend the life of your hose..
  • City Water Inlet for RV: City water connection inlet flanges connet trailer marine RV camper to city water hoses, keeps contaminants out of your fresh water system. Easy-grip knob allows easily attach and detach the hose..
Check Stock

Chapin International Chapin HydroFeed 4701, 24-Ounce, No Color

  • 24-Ounce clear tank with funnel-shaped head for easy filling and monitoring usage.
  • Ideal for use with liquid or granular concentrates and/or fish emulsion applications.
  • Built-in bracket for secure mounting to walls or posts.
  • Large opening with O-ring for leak-free operation.
  • Rigid inlet tube with filter for debris-free mixing and drain plug with valve to quickly empty the tank after each use.Use with Sprinkler systems and standard garden hoses.Power source type: Air Powered.
Check Stock

Kerick Valve MA252 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/4\ Tube

  • Estimated rate of flow up to 1.5 gpm at 60 psi.
  • Tank mount with extended threads on inlet side of valve for mounting through tank wall.
  • Includes 1.5x4" float ball attached to adjustable valve shutoff arm.
  • 1/4" tube fitting inlet and free-flow outlet.
Check Stock

Malida Water Filter Float Ball Valve,or Fish Aquarium  Uses 1/4 Inch Supply Tube.

  • Suitable for Reverse Osmosis System,Fish Aquarium,etc.
  • PVC for corrosion resistance,Top mounted.
  • Float Ball Valve Shut off Uses 1/4" Supply Tube.
  • Tank mount with extended threads on inlet side of valve for mounting through tank wall.
  • PVC Mini Float Valve, Tank Mount, Adjustable Arm.
Check Stock

2 Premium - Red Single Blade Inflatable Light Saber Swords, Lightsaber, Party, Gift, Action Play, Blow up Darth Vader (Red 1-Blade)

  • Pack of 2 premium inflatable swords. Darth Vader red single blade..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape..
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
  • For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
Check Stock

Mini Scuba Tank, 0.5L Scuba Oxygen Cylinder Scuba Diving Tank, Scuba Diving Equipment Diving Respirator, Scuba Accessories Underwater Breathing Device For Underwater Diving Breathe Training(Orange)

  • ...esist internal corrosion and stands up well to damage. Our scuba gear passes DOT certified in the US (This is the genuine product of the DEDEPU brand, we have got authorized)It can be used normally within 30 meters and as a standby air source at 60 meters..
  • 【Triple Filtration】:In our scuba tank compressor, the inlet valve, and the outlet valve is set up as a filter device, the triple filter can effectively remove peculiar smell, let every bite you have clean air to breathe, even if you use other commercial electric inflator scuba tank pump or replace bottle without filtering device to supply gas, the filtration unit can reduce their oil smell which will greatly improve your diving experience..
  • 【Wide Compatibility】: The diving tank kit provides a scuba tank pump and refills adapter that you can use the scuba tank hand pump to inflate the scuba tank at any time. ( Please inflate it in advance. It will take some time) It is also compatible with electric inflation pumps with pressure above 200bar3000PSI/200Bar/20MPA). The 1L diving tank can be used for 493 times underwater breaths when fully inflated, it's about 15-20 minutes(the driving time determined by the breathing rate)..
  • 【Just Take and Go】: Package including 1*D08 Air Tank, 1*Saftety La....
Check Stock