ReviewsAir Tank Manifold Fittings

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 50.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Check Stock

PHITUODA 1\\/2 3 Ways 6 Ports Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting with Pipe Sealant Tape - Pack of 2

  • *Package Included: 2 x Air Hose Manifold Block, 2 x Pipe Sealant Tape. Position: 3 Ways. The number of Threaded Ports: 6 Ports. Threaded Port Dia: 1/2" BSPT..
  • *Premium Material: The manifold body is made of high corrosion-resistant anodized aluminum with a sky blue brushed nickel finish, which makes it not easy to deform, more durable, and 50% lighter than standard fittings..
  • *Practical Design: The operating pressure is 0 to 1MPa / 145 PSI. Guaranteed pressure resistance is 1.2MPa / 175 PSI. The max working pressure is 2MPa / 300 PSI. The working Temperature is 32 - 140 ℉ / 0 - 60 ℃..
  • *Ideal Application: Manifold Block takes one line of air from a pump, air cylinder, compressor, vacuum engine, or other such system and splits it into many of them. All ports are in the same size so that you can use it as a 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirement..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!.
Check Stock

Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank

  • 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Check Stock

MaxLine 100 Foot 0.5 Inch Semi Flexible Compressed Air Tubing Master Kit Pipe Mounting Clips 10-Pack and Filter Regulator with Gauge

  • Tubing master kit, 10 mount clips, and regulator ensure an easy-to-use, contained, and safe air compressor set up in your shop.
  • Semi-flexible tubing uses compression fittings for leakproof performance.
  • Constructed with aluminum core surrounded by inner and outer layer of polyethylene.
  • Includes 100 feet of 0.5-inch tubing, (3) air outlet kits, compressor manifold kit, (5) elbow fittings, deburr, and cutter tool.
  • Mounting clips are easy to install with single screw hole.
  • Each clip withstands 175 pounds per square inch.
  • 5-micron filter protects air compressor tools by removing harmful solid particles and liquid contaminants from your machine.
  • Gauge relocates for reversible flow direction.
Check Stock

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

  • SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
  • WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
  • features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
  • DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
  • EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
  • SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.
Check Stock

Lichamp A/C R134A Adapters with Puncture 134A Can Tap, AC 134 Quick Coupler Hose Connector Fitting Kit with Tank Adapter and Valve Core Remover, QA02

  • Professional AC R134A freon charging tool kit, come with pair of R-134A adapter, 1-piece ac can tap valve with tank adapter, 1 classic valve core remover..
  • R 134A Adapter, adjustable valve for easy attching and removal without freon leaking, accurate snap lock (5 ball) with knurled grip ring for easy operation, removable copper adapter for longer maintenance, 1/4 inch male fitting compatible with most automotive air conditioner diagnostic AC manifold gauge hose.
  • Can Tap Valve Set, R-134A can tap refrigerant bottle dispenser with 1/4 inch male fitting, extra conversion tank adapter featuring 1/4 inch female to 1/2 inch male fitting, thus this set will fits both 1/4 and 1/2 inch female fittings AC gauge hose.
  • Come with extra automotive high and low pressure side service port valve core removal and installation tool, dual head with thick and thin heads will fits most models.
  • 100% SATISFACTION: If you aren't satisfied with your purchase, contact us through our email at any time you want, and we'll issue you a refund..
Check Stock

SMC KM11-07-11-6 PBT Push-To-Connect Tubing Manifold, 2 Inlets-3/8\

  • Port A One-touch Fitting, Port B One-touch Fitting.
  • One-touch fittings give the most efficient operation.
Check Stock

Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the ....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....
Check Stock

Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support

  • 100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 50” Longest Length (not including fittings) x 18” x 26” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in ....
Check Stock

Maxline Pressured Leak-Proof Easy to Install Air Compressor Accessories Kit Piping System | 1/2 inch x 100 feet HDPE-Aluminum | Connects w/ any Air Compressor Hose | 100 PSI | 35 Pieces | M3800.

  • of 1/2-inch tubing, (3) air outlet kits, compressor manifold kit, (5) elbow fittings, deburr and cutter tool.
  • 175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter.
  • Compression style nickel plated brass fittings.
  • maximum from the air compressor, up to 2000 sq..
Check Stock