ReviewsAir Tire Bead Seaters

Tube, 20", Select Size & Valve Type. 1 Pack or 2 Pack Money Saver. Regular or Presta Valve Bicycle Inner Tube, Sunlite, BMX, Recumbent, Stroller, Youth Bike, Toddler Bike, Trailer

1 Tube, 20″x 1.35-1.50″ (ISO 406×35-40).
32mm PRESTA Valve (see images for sample valve types and lengths).
High pressure performance bikes, Recumbent, Road, Triathalon, or any tire with the same dimensions..
Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire. For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..

BESTOOL Manual tire bead breaker loosens the bead from the rim with leverage and is excellent for working on tires without removing the wheel.
Excellent for small ATV and lawnmower tires, 38" and 42" 14-ply farm tractor. Operates with an air ratchet or manual wrench (not included).
Easy to use - Just drive it in, snug it down and turn the jack screw..
Convenient design-With the locking collar, it will holds tire securely. Makes work safe and convenient when you operate.
Simple and Easy - Bead breaker tool for tire removal all assembly hardware are included. Clear and brief instruction makes it much easier to put....

Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire..
For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..

950 Tire Changer - Rim clamping outside 10"-20" / Rim clamping inside 12"-24".
950 Tire Changer - Includes bead blast air blast / Maximum Tire Diameter 37" (960mm) / Maximum wheel Width 12".
680 Wheel Balancer - Rim Diameter 10"-24" / Rim Width 1.5"-20".
680 Wheel Balancer - Max. wheel diameter: 44" (1117mm) / Maximum wheel weight 155 lbs.
Includes bead blast air blast / Pre set to American Standard Measurements / Includes all accessories shown in the pictures.

980 Tire Changer - Rim clamping outside 13"-24" / Rim clamping inside 15"-28".
980 Tire Changer - Includes bead blast air blast / Maximum Tire Diameter 49" (1250mm) / Maximum wheel Width 13".
800 Wheel Balancer - Rim Diameter 10"-24" / Rim Width 1.5"-20".
800 Wheel Balancer - Max. wheel diameter: 44" (1117mm) / Maximum wheel weight 155 lbs.
Includes bead blast air blast / Pre set to American Standard Measurements / Includes all accessories shown in the pictures.

THE LIP SEALER: Get it sealed right on the first try.
The lip on the barrel guides the tire blast tank to the perfect 40 degree angle for easy tire....
FOR TIRES BIG AND SMALL: This tire blaster seats tires as small as 4 inches and as large as 24-1/2 inches.
Get things rolling again for cars, trucks,....
DON'T TIRE YOURSELF OUT: This bead blaster is faster, easier, and safer than other ways to seat tires that use straps or fire.
PERFORMANCE UNDER PRESSURE: Fill this tire bead setter up to a maximum of 150 PSI with a standard shop air compressor.
PORTABLE POWER: Connect a dual chuck to the ball valve to turn this bead seating tool into a portable tire inflator.

2 Tubes, 700c x 28-35, (27x1-1/8 to 1-1/4).
48mm Presta Valve, Threaded w/Removable Core.
Please check the side of your tire or on your old inner tube for the proper size, valve type and valve length..
When changing your bicycle inner tube ALWAYS be sure to add just a little air to the tube before installing. This gives it form so it doesn't get twisted or bunch up which may cause a pinch flat. Once the new tube is installed and BEFORE fully inflating only add a few PSI to further form the tube. Inspect for an even bead of the tire to the rim on both sides..
Then, inflate to approximately half the desired PSI and re-inspect the tire bead to the rim again. If even beading all the way around on both sides then inflate to the recommended air pressure. This procedure is important because if the bead doesn't hook properly on the rim then as the inner tube is inflated it can sneak out between the tire and rim and then BOOM!.

Versatile Application - The bead breaker and foot pump are great for all kinds of tires - ATV, Golf Cart, Bus, Truck, Agricultural, and even Back Hoe Tires.
Easy Operation - The pump adopts the user-friendly foot-actuated design for easy control and operation, time-saving and labor-saving with strong power.
Excellent Removing Tool - Our tire bead tool kit can perform greatly on the tires by loosening tire bead from the rim with leverage without removing the wheels.
Heavy Duty - Max Pressure 10,000psi (700bar).
Pressure Range: 40-150psi (2.8 to 10.3Bar) Our hydraulic bead breaker delivers 10,000 lbs. of force in seconds to break beads smoothly under hydraulic action.
Hydraulic Foot Pump - Our bead breaker tool kit comes with a 700bar air hydraulic foot pump, and one air hose is also included..

Car bead breaker universal bead breaker for car, truck, tractor, mower, ATV, RV, golf cart and more..
No need for hydraulic pump. Loosens tire bead from the rim with leverage..
Clamping jaw with two adjustable set screw for better grip on wide variety..
Excellent for working on tire without removing the wheel from tractor..
Operates with impact wrench and or air ratchet wrench. Easy to use with simple hand tools, 1 person operation..

The leader in hybrid tires, Kenda offers numerous styles with something suitable for every cyclist.