ReviewsAir cooled Engine Oil

SUNROAD 50cc Bicycle Engine Kit 26' 28' 2-Stroke Motorized Motor Bike Kit for Mountain and Road Bike Cycle Motor Kit Black

  • This 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike, you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter..
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Lēnā upe

  • ENGINE: Honda GX 160 engine delivers reliable and rugged performance.
  • MULTIPLE NAILERS: 9.5 CFM delivered at 90 PSI operates multiple nailers simultaneously.
  • PUMP: Cast iron, low RPM, oil lubricated pump for improved performance and durability.
  • AIR COOLED: Air-cooled after cooler reduces moisture inside air tanks.
  • REGULATOR: Locking regulator ensures efficient air pressure delivery.
Check Stock

Anbull 7.5 HP 223cc Recoil Start Gas Engine Horizontal Shaft 3/4' x 2.43' Go Kart Gas Engine for Log Splitter Single Cylinder 4-Stroke Gas Engine Forced by Cooling OHV Motor EPA Approved

  • 【7.5HP High Performance Motor】Anbull 4 Stroke 7.5hp gas engine has a Max Output Power/Speed of: 5.5kW/4000RPM & Torque of 12.5Nm. Shaft Size: 3/4" Diameter, 3/16" Length. Keyway 5/16”-24 UNF. Compression Ratio of: 8.5:1. Bore x Stroke of: 70mm x 58mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm..
  • 【Low Oil Sensor】The low oil shutoff functionality turns the engine off to prevent serious damage or failure when the gas engine at low oil level. Similarly, if the oil level is lower than required level when starting, it will not start..
  • 【Built-in Forced Air Cooling System】Transistorized Pointless (TCI) Ignition System, recoil start system and built-in forced-air cooling system keep the motor cool and delivers high reliability and durability operation..
  • 【Industrial Grade OHV Motor】Industrial grade OHV motor is equipped with higher combustion efficiency and allows your machine to run at higher speed..
  • 【EPA approved】 The horizontal shaft is mounted in the crankcase with dual ball-bearings, making this gas engine an ideal replacement for most standard engine configurations. The powerful gas engine features a durable cast iron cylinder making it the perfect replacement engine for a go-kart, log-splitter and dozens of other....
Check Stock

PEXMOR 50cc Bicycle Engine Kit, 2-Stroke Petrol Gas Motor Engine Set, Motorized Bike Cycle Complete Engine Refit Kit, Super Fuel-efficient for 26' 28' Bicycle (50cc (Silver))

  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

Seeutek 80cc Bicycle Engine Kit 26" 28" Bike Bicycle Motorized 2 Stroke Cycle Petrol Gas Motor Engine Kit Upgrade with Speedoemter

  • 80cc bicycle engine kit with speedometer.This bike engine kit fits most mens' 24" and larger bicycles which includes mountain,cruiser,chopper and road bikes with a V-frame, at least a 8.5" height clearance for the engine. Large bikes (larger frames/down tubes) may require the universal mount. Notes: Be assured the mixing ratio for gas and oil:16:1 for break period (first 300 miles)/20:1 after to avoid motor lock up or piston seized. Please read attached instruction manual before installation..
  • 80cc bike motor kit, Mode of engine: single cylinder, air-cooling, 2-stroke.
  • chain length:110 links, 55 inches. Driving ratio:18: 01.
  • lubrication oil: motorcycle synthetic 2 stroke oil. Notes: Fuel Type:Gas 93# and please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting..
  • Horse power: 2.75 HP. Ignition type: CDI. Engine Type: Single cylinder, air-cooling, 2-stroke.
  • Chain Length: 110 links. Larger frame size requires drilling into bike frame and use of the universal face plate.Notes:If new carb ....
Check Stock

Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

munirater 2 Stroke 80cc Bicycle Petrol Motor Engine Kit, Bike Motorized 2 Stroke Engine Kit for 24inch 26inch Bicycle

  • Engine type: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • Fitment: Fits for most 24inch or 26inch wheeled bikes with V-frame. Max.speed: 38km/h.
  • Low Fuel Consumption: 2.5L/100km, Engine oil: motorcycle synthetic two-stroke oil. The mixing ratio is 16:1 for new sets.
  • 20:1 after running 300 miles. In order to better break in the engine, please limit the time of the first few rides to 1 hour.
  • Package: This 88CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle.
  • Upgrade bike: This bicycle engine kit can help you upgrade an ordinary bicycle to an electric bicycle, enjoy a faster riding experience.
Check Stock

Diesel Engine 196CC 4 Stroke Single Cylinder Forced Air Cooling Horizontal Axis Engine Recoil Hand Start 3000RPM 2.2KW, 53mm Shaft Length (Orange)

  • 【SELF-INJECTION DIESEL SYSTEM】4 Stroke 196CC Diesel Engine, equipped with elf-injection diesel system, good atomization, low oil consumption, more punctual diesel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【GOOD COOLING PERFORMANCE】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS 1】Model: 168F, Shell material: Aluminum, Displacement: 196CC, Speed: 3000 RPM, Maximum output: 2.2KW, Number of cylinders: Single Cylinder, Engine cooling method: Air Cooling, Start method: Manual Start, Starting system: Hand Recoil, Ignition method: Compression Ignit....
Check Stock