ReviewsAircondition Copper Fitting

RIDGID 62862 RT-175 Electric Soldering Gun

  • The product is 62862 TORCH, RT175 FLAMELESS 115V.
  • This product manufacture by United States.
  • Lightweight Rugged Electric Soldering Gun.
  • This Gun Sweats Joints on Copper Tube up to 3".
  • The RT-175 Can Be Operated on a Standard 115v, 15amp Outlet.
  • There is No Open Flame to Worry about Igniting Wallboard, Insulation or Studs and Joists in the Walls.
  • Easy to Operate, Just Place the Carbon Tips on the Copper Fitting and Remove When the Solder Begins to Flow.
Check Stock

WeldingStop 9-8215 9-8210 SL60 SL100 Plasma Torch Electrode Nozzle 60A Tip for Thermal Dynamics Cutmaster 52 SL60 Consumables PKG/10 [Hafnium & Copper Electrode 9-8215]

  • ✓Use Hafnium wire and Copper to make 9-8215 electrodes——The electrode uses hafnium wire and copper as the main materials. Unlike other products on the market that use cheap Pickaxe wire. the service life of the electrode using hafnium wire is longer than other electrodes using pick wire.
  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 / 102 / 152 Cutter SL60 / SL100 Torch；These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 5pcs 9-8215 electrodes and 5pcs 9-8210 standoff tips WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 60A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Rubber Flex Coupling Parallel 2” Tubular x 2\ Tubular

  • FLEXIBLE RUBBER. Flexible rubber parallel coupling that fits with steel piping, copper, cast iron, plastic, copper and lead..
  • HIGHLY DURABLE. Sealed leak-proof flexible connectors with stainless steel clamps that will last.
  • MANY APPLICATIONS. Applications include non-pressure drain, waste, and vent piping systems and sewer systems indoors and outdoors.
  • CERTIFIED AND UPC APPROVED. Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use..
Check Stock

Rubber Flexible Coupling Parallel 1-1/2 inch x 1-1/2 inch

  • Flexible rubber parallel coupling that fits with steel piping, copper, cast iron, plastic, copper and lead.
  • Applications include non-pressure drain, waste, and vent piping systems and sewer systems indoors and outdoors.
  • Sealed leak-proof flexible connectors with stainless steel clamps that will last.
  • Double fitting size: 1-1/2” x 1-1/2”.
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use.
Check Stock

uxcell Acrylic Computer GPU Universal Water Cooler Cooling Block Radiator Clear

  • Package Content: 1 x Water Cooling Block.
  • Material: Acrylic, Stainless Steel, Copper.
  • Size: 73 x 73 x 22 mm/2.9” x 2.9” x 0.9”(L*W*H).
  • Screw Size: 35 x 2.4mm/1.4” x 0.09”(L*D).
Check Stock

uxcell Acrylic Computer GPU Universal Water Cooler Cooling Block Radiator Black

  • Product Name: GPU Cooling Block Radiator.
  • Package Content: 1 x GPU Cooling Block Radiator.
  • Material: Acrylic, Stainless Steel, Copper.
  • Size: 73 x 73 x 22 mm / 2.9” x 2.9” x 0.9”(L*W*H).
  • Screw Size: 35 x 2.5 mm / 1.4” x 0.1”(L*D).
Check Stock

Parker A-Lok 4NU4-B Brass Compression Tube Fitting, Nut, 1/4\ Tube OD

  • Nut tightens and provides compression on the ferrule of a flareless fitting.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • ...ater compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule....
Check Stock

Legris 0105 08 17 Brass Compression Tube Fitting, Connector, 8 mm Tube OD x 3/8\ BSPT Male

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to tubing on one end and has a BSPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Ferrule compression fitting for a leak-resistant seal.
  • For use with copper, nylon, or plastic tubing.
Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

  • This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
  • This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
  • Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock