ReviewsAircraft Sheet Metal Tools

Jwodo 2Packs Torch Tip Cleaner for Cleaning Welding Cutting Nozzles, Gas Orifices, Oxy-Acetylene, 1Pack Sheet Metal Thickness Gauge Measuring Tool, Great Welding Gage Plated Size Inspection Tool

【PREMIUM QUALITY】This tip cleaner wires are made from premium quality Stainless Steel and Enclosed in a Sturdy Aluminum Casing. The stainless steel Sheet Metal Gauge and the tip cleanner are all rust-proof, non-deforming with good elasticity..
【USEFULLY TIP CLEARNERS】The 13 different diameter Cleaning Wires with spiral knurling can help you dirty and won’t dirty your hands. The professional tip cleaners are great for welding cutting Nozzles or oxy-acetylene torch tips, Gas Orifices, cleaning Engine Carburetors for most auto motorcycles, ATV, lawn equipment and many other power sport carburetors, and cleaning other small orifices such as nozzles, air tools, camping stoves, tattoo device, sprinklers, shower heads and so on..
[PROFESSIONAL METAL THICKNESS GAUGE] The sheet thickness gauge is a must-have metal working tools and equipment for checking metal sheet wire size before welding or working. Our updated professional metal thickness gauge features with double-sided scale and deep engraved golden letters, which allows you to read the number easily and clearly from all directions without misreading..
[SIZE] The Tip Cleaner Set includes 2Pcs 100mm (4”) Tip Cleaner. Each 4” Tip Cleaner includes a flat file and 13 Wire Files (49 to 77) wi....

Check Stock

2023 New Electric Drill Plate Cutter,Metal Nibbler Drill Attachment with Adapter, DIY Metal Drill Attachment, Sheet Metal Knife for Cutting Iron, White Sheet, Steel,Copper, Aluminum(less than 1mm)

[Strong Cutting Ability] This metal nibbler drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, it can save a lot of work time, Improve efficiency. TINUFREE.
[Electric Drill Plate Cutter Accessories] With a high hardness cutting head, this nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm).Dseeky.
[Easy to Use]: This metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. And it also comes with an adapter handle, which can adapt to a variety of different electric drills. The drill bit is very compact, easy to store when not in use, perfect for your toolbox or locker and easy to carry..
[Multi-purpose application]The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. It can not cut sheet metal with blending, ribbed, special-shaped or welded shape or non-metallic ....

Check Stock

Metal Nibbler Drill Attachment, Electric Drill Plate Cutter Attachment, Metal Cutter Attachment with Handles, Smooth Cut, Convenient and Efficient Metal Shears, Suitable for Home Cutting

High-grade Materials: The metal cutter is made of high strength carbon steel, and is designed with double scissors for smooth and flat cutting. Our sheet metal tools can avoid the soreness of using manual scissors as usual..
Reliable Attachment: The nibbler drill attachment includes with 1 electric drill plate cutter (No electric drill), 1 wrench, 1 hex wrench and 1 set of fixing tools. It is compatible with most hand electric drill, lithium electric drill and impact drill. We provide you with a rubber ring. If the fixed position of the electric drill handle is small, add it in..
Ease of Operation: The replaceable electric drill plate cutter and the handle are easy to install on the drill bit. Begin to hold and cut, you can feel the same feelings of cutting like an industrial cutting..
Precision Cutting: Our metal sheet cutter has positioning groove to help you cut in an accurate way..
Applicable Materials: Suitable for sheet metal with a thickness of less than 1mm. Do not try to cut stainless steel and carbide, unless it is less than 0.5mm. If you have trouble with cutting, please contact us..

Check Stock

AIRCAT 6350 Low Vibration Reciprocating Air Saw 9,500 Strokes per Minute

APPLICATION: This saber saw, or also known as saber saw, is a powered reciprocating saw and is hand-held, yet larger than a jigsaw, that uses a....
DESIGN: This air tool is designed for high-speed metal cutting requirements with body and sheet metal, and is ideal for body shop repair, muffler and....
QUALITY: The body of this unit is constructed with aircraft grade aluminum with an adjustable blade guide that increases blade life, accuracy and....
VERSATILE: This tool can cut intricate shapes and tight radius curves on a flat and/or curved surface and cuts all types of aluminum, plastic,....
SPECIFICATIONS: Includes 10,000 RPM free-speed, 10 mm stroke length, 1.5 mm cutting capacity, 6 CFM air consumption, 90 PSI air pressure, and a 1/4"....

Check Stock

5052 Aluminum Sheet Unpolished Mill Finish H32 Temper ASTM B209 0.09 Thickness 36 Width 48 Length OnlineMetals

5052 aluminum provides excellent formability, good corrosion resistance, good workability and higher strength than that of either 1100 or 3003..
5052-H32 is typically used in aircraft fuel lines, sheet metal work, fuel tanks, appliances, lighting, wires, and rivets..

Check Stock

Boeshield T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 12 oz. (5)

Boeshield is great for use in Marine, Bicycles, Automotive, Tools and Aviation.
Boeshield loosens rusty and corroded parts and is safe on paints, any metal surfaces, plastics, and vinyl.
T-9 flushes out dirt and old lubricants, displaces moisture, and penetrates moving parts.
Boeshield dries to a thin, waxy film that clings to metal for months.
Boeshield was developed by The Boeing Company for lubrication and protection of aircraft components.

Check Stock

BILITOOLS 3-Piece Hand Seamers Sheet Metal Bending Pliers Set Straight, 45° & 90° Metal Bender Tool

Three sizes of sheet metal bending pliers for your selection: straight jaw, 45 degree jaw, 90 degree jaw. These hand seamers are 2-3/8'' (60mm) wide..
Designed for bending or straightening sheet metal edge. Ideal tool for use on the car when it is not possible to use a bench folding machine or in tight areas..
Made of high quality, heat treated drop forged carbon steel, these tools are made with longevity and durability. Hardness approx. 30 to 35 HRC. Complete with a black finish with red dipped handles..
The pliers jaw close perfectly parallel and the edges of the pliers head are very straight—but they are not sharp. Sheet metal is not damaged when bending through the jaws of the pliers..
Please note: the metal benders may being a bit stiff to open/close at first, but they will start to loosen up after a while..

Check Stock

HURRICANE 18 Inch Folding Tool, Sheet Metal Bending Tool for HVAC, Bending and Forming Metal

【Sheet Metal Folding Tool】Hurricane 18" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together..
【Two Folding Depths】Creates 3/8" and 1" depth folding in ductwork..
【Ideal for HVAC Applications】Used for bending and forming metal, making seams, hems, pans and drive edges..
【Ensures Precise and Accurate Bends】Handy sight holes assure accurate bending depth alignment..
【Constructed of Heavy 16-Gauge Steel】Powder-coated low carbon steel to resist rust..

Check Stock

BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 1 Gallon Jug

Boeshield T-9 is great for use in marine, bicycles, automotive, tools, RV's, and aviation.
Loosens rusty and corroded parts and is safe on paints, any metal surfaces, plastics, and vinyl.
Flushes out dirt and old lubricants, displaces moisture, and penetrates moving parts.
Dries to a thin, waxy film that clings to metal for months.
Developed by the Boeing company for lubrication and protection of aircraft components.
Call or email us with any questions or concerns.

Check Stock

12 Metal DIY Model Kits Tool Including 7 Metal Model Long Edge Bending Tools Tab Twisting Tool Cylinder Cone Shape Bend Assist Tool 1 Clipper 4 Metal Tweezers for 3D Metal Jigsaw Puzzles Assembly

...e suitable for gifts to your family and friends, especially to those DIY model lovers.
Multiple functions: these 3D metal puzzles assembly tools are designed to bend the edge of metal pieces, bend or twist the tabs of metal pieces, and make cylinder and cone shapes.
Clipper is great for cutting pieces from the metal sheet, you don't need to remove each piece by bending back and forth.
Metal tweezers are suitable for unapplied details.
Easy to store: these metal model tools are compact and portable, making them easy to store in your toolbox.
Their tiny sizes allow you to carry them anywhere on demand, no matter if you are travelling, schooling, working, hiking, etc..

Check Stock

YESWELDER Round Dual Sided Metal Sheet Guage & Metal Sheet Thickness Gauge 2pk Stainless Steel Wire Welding Gauge

Package included - 1 piece of round dual sided wire gage + 1 piece of metal sheet thickness gauge.
High-quality material - Made of stainless steel, it has anti-rust and anti-corrosion properties. It is durable, it will not rust in dry environment, and it is easy to store. You can use it for a long time without changing it frequently,compact and light in weight, easy to carry.
Useful handy tool - Using these gauges to determine the thickness of material before working in order to save time and material. Really useful handy tools.
Easy To Use - Simply press the teeth against the object to match the contour and then trace the shape you need.
saves your time to mark the precise cut, easy to read.
Wide application: Dual-Sided Round Wire Gauge:Gauging uncoated sheet, plate iron and steel.
Wire/Metal Sheet Thickness Welding Gauge:Checking metal sheet wire size before welding or workin.

Check Stock