ReviewsAl Wire Scrap

VEVOR SWT508-JE Automatic Wire Stripper Machine 0.1-8 mm², Computer Sheathed Wire Cutting and Stripping Machine Hard Tungsten Steel Blade, Wire Stripping Machine Four Wheel Drive

  • ... time you might spend on trifles. You need to set the numbers, and then it takes over..
  • Tidy The Mess Up: It is equipped with a wire straightener, setting the wire in order before slipping it into the inlet..
  • Wide Application: The scrap wire stripping machine is the perfect choice to deal with wires of various types, including PVC, Teflon, silicone cables, glass fibers, etc. And it is widely used in the electronics industry, electrical industry, motors industry, and so on..
Check Stock

Happybuy Wire Stripping Machine DA 0.06 inch -1.5 inch,Wire Stripper Machine 11 Channels 10 Blades, Automatic Wire Stripping Tool with Manual Hand Cranked Industrial for Recycling Copper Wire

  • ...itch. Don't tuck your finger in, though, when it's on..
  • Extensive Use: This machine is ideal for whatever hard wire or soft wire, it can be easily stripped by using this model. Such copper wire recycler will detach the plastic and rubber insulation from undamaged scrap wire, a must-have for copper wire recycling..
Check Stock

BestEquip Wire Stripping Machine 0.06' -1.5',Automatic or Hand-crank Wire Stripper Machine 11Holes & 10 Blades, Automatic Wire Stripping Tool Motor Rated Speed 1400Rpm,for Recycling Copper Wire

  • ...ades for your wire stripping. A protective cover for high security and ensuring continuous high performance..
  • Extensive Use: This machine is ideal for whatever hard wire or soft wire, it can be easily stripped by using this model. Such copper wire recycler will detach the plastic and rubber insulation from undamaged scrap wire, a must-have for copper wire recycling..
Check Stock

TEMCo Kanthal A1 wire 24 Gauge 100 Ft Resistance AWG A-1 ga

  • 24 AWG, Average wire diameter: 0.0201 in. (0.51054 mm), 2.07 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 20 Gauge 25 Ft Resistance AWG A-1 ga

  • 20 AWG, Average wire diameter: 0.032 in. (0.8128 mm), 0.817 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 18 Gauge 50 Ft Resistance AWG A-1 ga

  • 18 AWG, Average wire diameter: 0.0403 in. (1.02362 mm), 0.515 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 16 Gauge 25 Ft Resistance AWG A-1 ga

  • 16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 28 Gauge 1000 Ft Resistance AWG A-1 ga

  • 28 AWG, Average wire diameter: 0.0126 in. (0.32004 mm), 5.27 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 16 Gauge 8 oz (79 ft) Resistance AWG A-1 ga

  • 16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 18 Gauge 8 oz 126 ft Resistance AWG A-1 ga

  • 18 AWG, Average wire diameter: 0.0403 in. (1.02362 mm), 0.515 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 16 Gauge 1 lb 159 ft Resistance AWG A-1 ga

  • 16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock