ReviewsAll purpose Welding Rod Holder

Forney 31101 E6011 Welding Rod, 3/32-Inch, 1-Pound

All position welding, all purpose rod for deep penetration and fast freezing on dirty, rusty and painted materials.
Smooth arc wetting and spread with good spatter providing fast deposition and flatter contour fillets offering faster travel speeds^Minimal surface preparation required.
Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications.
Dependable and ideal for AC operation, can be welded DC+ too.

Check Stock

Forney 31201 E6011 Welding Rod, 1/8-Inch, 1-Pound

All position welding, all purpose rod for deep penetration and fast freezing on dirty, rusty and painted materials.
Smooth arc wetting and spread with good spatter providing fast deposition and flatter contour fillets offering faster travel speeds^Minimal surface preparation required.
Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications.
Dependable and ideal for AC operation, can be welded DC+ too.

Check Stock

Forney 31210 E6011 Welding Rod, 1/8-Inch, 10-Pound

All position welding, all purpose rod for deep penetration and fast freezing on dirty, rusty and painted materials.
Smooth arc wetting and spread with good spatter providing fast deposition and flatter contour fillets offering faster travel speeds^Minimal surface preparation required.
Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications.
Dependable and ideal for AC operation, can be welded DC+ too.

Check Stock

Welding Electrode 10pcs ARC welding rods Electrodes Mild steel 1.6mm - 3.2mm E6013 General purpose Welding Rods (Size : 1.4mm x 250mm 10pcs)

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
Not recommended for use with low open circuit-Voltage OCV power sources.

Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

110V Welding Machine, IGBT Portable MMA Welder Machine Gun, 6 Variable Current Handheld Welding Machine for 1/16”-1/8” size Arc Welding Rods

The welding machine with IGBT inverter technology not only increases efficiency, but also reduces the weight and size of the arc welder..
MMA welding machine, perfect appearance, high quality internal structure, small body, light weight, energy efficient, easy to carry and use, whether you are working outdoors or indoors..
Multi-purpose MMA welder is versatile and suitable for repair, metal fabrication, outdoor repair, truss. Suitable for welding alloy steel, carbon steel, copper and other non-ferrous metals..
ARC welder fits all 1/16”-1/8” size welding rod.
Kit includes: 1*ARC welder, 1* Earth Clamp, 1× brush, 1*user’s manual and 1*tool pouch.

Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

Check Stock

GADFISH Stainless Steel Hitch Fishing Rod Holder, Hitch Mount Rod Holder, 4 Link Tube for 2" Hitch Receivers with Quick Release Pin,Truck Adjustment Fishing Rod Rack, Fishing Pole Holder

...ver, easily stored in trunk with garage and wall mount. Also can store 4 rod tubes, suitable for 1.57" diameter rods.The length, width and height of the fishing rod are 16.54''x12.2''x9.84''..
【Light and Stable】Stainless steel fishing Rod Holder has been tested by welding strength, the pins and fixed shaft firmly lock the rod holder, which can be used smoothly in bumpy and muddy journeys to ensure the stability of the rod..

Check Stock

STINGER Stv002 Electrode Holder Insulated

V Securely Holds Electrode, Ergonomic Comfortable Rubber Handle.
Amperage: 0 - 350, Electrode Capacity: 5 MIL / 3/16", Cable Capacity: 1/0 ga..
Eliminates Arc Burns From Rod "Popping" Out.
Molded Thermoset insulating cover set meeting the requirements of your welding projects.
Most Heavy Duty Welding Electrode Holder on The Market, Made In The USA.

Check Stock

200A ARC Welding Machine, 110V/220V Dual Voltage Welder, IGBT Stick MMA Welder LED Display with Electrode Holder Work Clamp

【 Digital IGBT Inverter Technology 】This welder has 110/220V dual voltage, using IGBT technology, current control of the welder ,One-button arc starting makes welding more smooth and easy to use. It’s suitable for novice operation. It’s also equipped with overcurrent, overvoltage and overheat protection to ensure the safety of operation..
【Auto Adaptive Arc Force】If the arc function is turned on, the welding rod can achieve the effect of no sticking and no spattering or arc breakage under the condition of ensuring stable welding..
【Heat Dissipation】Built-in thickened serrated radiator, external high-speed silent fan double the heat dissipation, extending the life of the welder..
【Multi Use】The Welder machine is ideal of 6010 7018 welding rod, suitable for mild steel , stainless steel, low alloy steel and other metal material..
【Package】 1 x Stick welder ,1 x Electrode Holder with 10 feet Cable, 1 x work Clamp & 10 feet Cable , 1x Power Cord , 1 x Brush and Hammer , 1 x mask , 1 x carrying strap , 1 x User Manual..

Check Stock

THKFISH Fishing Rod Holders for Garage Ceiling Fishing Rod Rack Store 16 Fishing Rod Combos Fishing Rod Rack for Garage Room Boats,1pair-GOLDEN

...ds, just need to hang up. NOTE: You can also alternate the fishing rod butt and tip to provide extra clearance for fishing reels..
ENHANCE STABILITY: This fishing rod rack is sturdy and durable. We improved the stability by adding a second-beam to the rod rack, and all the welding joints are reinforced in order to improve its structural strength. The fishing rod rack is made of Iron, and smooth coating keeps the rods and your line from getting scratched..
WIDE APPLICATION: This fishing rod rack can mount on the ceiling of your garage, home, cabin, boathouse or shed for your convenience. Suitable for most fishing rods including spinning, baitcasting, fly rods, ice rods, saltwater fishing rod and more! The mounting holes in end makes hanging easy. Easily installed, then you can quickly and easily access the fishing rods..
A GOOD CHOICE: A good solution for storing fishing rods. There are a variety of color options (Black, White, Gold), suitable for different household style. The package includes 1 pair fishing rod holder. If you're looking for a premium rod rack, THKFISH provide highest level of customer service and qual....

Check Stock