ReviewsAlloy Cnc Machining Part

AIYIHOBBY Aluminum Alloy Front Caster Block & Steering Blocks kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736(Blue)

Compatible with 1/10 Scale Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor, Nitro Slash, Bigfoot 2WD RC Cars Trucks ONLY..
2WD Front Caster Steering Blocks kit can be easily upgrade replace Traxxas stock part #3632 Caster blocks, #3736 Steering blocks..
1/10 Front caster steering blocks kit is made of aluminum alloy material for increased crash resistance and long-lasting durability during the most extreme RC action..
Metal front caster steering blocks is CNC precision machining for smooth suspension arms operation in all conditions..
Package Include(Necessary parts required for installation): 2*Steering Block, 2*Caster Blocks (left/right), 6*Screw Pins, 2*Screw, 4*5x11x4mm bearings, 4*Gasket..

Check Stock

3Pcs ShareGoo Metal 25T Servo Horn 25 Teeth Steering Arm Compatible with Futaba Savox Power HD HSP Servos Motor Compatible with Wltoys Himoto Redcat Traxxas Axial 1/8 1/10 Car Truck (Black)

Compatible with Futaba HSP Power HD Axial Savox Xcore MG995 MG996R MG946R and So on. Fit for 1/8 1/10 RC Models,for example,compatible with Traxxas Axial Tamiya HPI HSP Wltoys Axial SCX01 RC car truck..
Made of aluminum alloy,CNC machining makes it precise in size and stable in performance..
Distance from hole center to hole center:12mm,16mm,20mm / 0.47",0.62",0.78".
A great replacement part for your rc models car..
Pack of 3piece 25T servo arm. Color: black.

Check Stock

Scott Archery Talon Release - Black Strap

Material: Aluminum Alloy Made, Strong Durable and Solid Archery Compound Bow 3 Fingers Thumb Release Aid..
Precision Craftsmanship ：CNC machining, seamless splicing, and superior hand feeling. The surface is hard oxidized, wear-resistant, and does not fade..
UNDENIABLE COMFORT: The Trigger's Sensitivity Can Be Adjusted By Wrench. Good Operation, No Hand Injury..
Great for Hand Held:Left And Right Hands Can Be Adjustable.Compact and Lightweight, Convenient to Carry, Hard Oxidation Treatment, Built-in Safety Device..
UNINHIBITED ROTATION :362°Rotated Clamp Head..

Check Stock

Adjustable 7 Piece Aluminum Camber Link Rod Ends Sets with 16*Screws and 8 Nuts for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts (Blue)

❤fit for 1/10 2WD Slash, Ford F-150 Raptor, Nitro Slash,Specially for Slash 2WD RC vehicle. RC Car.They are made of upgraded aluminum alloy, anodized, CNC machining, high precision and full set of tie rods turnbuckles.
❤The pull rod can adjust its length according to your needs. replaceable 1935 3139A 3139X 3644 3745..
❤It is easy and convenient for installation and removement, and it is also an excellent upgrade spare part to replace the broken or old one. Meanwhile, it is a great gift for RC model lovers..
❤Package Include：8 x Adjustable Metal Links,16 x Screws and 8 x Nylon Lock-Nuts(Note: If the connecting rod screw is loose, fix the connecting rod on the car shelf and tighten the screws to solve the loosening problem.).
❤100% brand new, Made by ROOPZZO, Exquisite Workmanship, Durable.

Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

BACHIN Mini Lathe Beads Polisher Machine Diy Machining for Table Woodworking Wood DIY Tool Lathe Standard Set

Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use..
Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch).
Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm.
High-precision, stability, low noise, aluminum alloy materials, CNC machining..
Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes..

Check Stock

Piscifun Alloy X Spinning Reel Saltwater CNC Machined Sealed Body Lightweight Metal Fishing Spinning Reel 11+1 Bearings Spinning Fishing Reel Freshwater 5000

Strong & Durable - The Piscifun Alloy X spinning reel is constructed with a one piece precisely CNC machined body to hold larger internal gearing....
Waterproof Design - The Alloy X fishing spinning reel comes with strong seals from the drag knob to the reel’s main body to block the invasion of....
Premium One Piece Bail Wire- Allows the line to travel unimpeded to the line roller. This seamless design and special surface treatment reduces....
Light & Tough - The precise machining process accurately removes unnecessary corners, the weight of Alloy X spinning reel is reduced and the strength....
Unique & Innovative - The Alloy X is loaded with incredible features like our easy to maintain back cover, super powerful carbon fiber drag and tough....

Check Stock

Compound Bow Kit M109E Steel Ball Compound Bow 30-60lbs Adjustable Draw Length Adjustable Adult Compound Bow Left and Right Hands Universal

【Bow handle】Made of high quality 7075 aluminum alloy material. CNC precision machining, fine workmanship, smooth surface and wear-resistant. The wind tunnel design can reduce the overall weight of the compound bow, reduce wind resistance, and make archery more accurate. Composite ergonomic design, comfortable grip. Those who are accustomed to left-handed archery can also use it.
【Bow Limbs】Made of American high-quality materials. Professional grade bows. Stable performance and lasting resilience. Durable and won’t lose lbs with prolonged use. The bow limb is the core component of the compound bow. A good Bow Limbs is crucial..
【Cam】 The cam is also precisely machined by CNC machining technology. Equipped with bearings, the rotation is smoother. Shooting arrows and shooting steel balls are more stable. A good cam can save you even more manpower when you’re shooting arrows. The labor saving rate is as high as 70%.
【Parameter Adjustable】The draw distance can be adjusted between 25.5-28.5 inches. The pulling force can be adjusted between 30–60lbs, which can be adjusted according to your own needs. Keep the same up and down when adjusting the parameters..
【Packing list】Compound bow x1, arrow rest x1, shock absorber x1, wrench x1, rel....

Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock