ReviewsAlloy Milling Part

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.

Check Stock

MNKNENG 8 Set 1/4 inch End Mill Bits 4 Flute Straight Milling Cutter HSS-AL CNC Square Nose End Mill Bits Straight Shank Drill Bits for Wood, Steel, Titanium(6.35mm,4T) 1

Dimensions ---- Shank diameter: 1/4inch / 6.35mm.
Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life.
Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance..
Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds.
Durable, high precision and not easy to break.
easy installation and improved work efficiency..
Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc..
Package Contents ---- 8pcs 1/4” end mills, each is individually packed in a plastic storage box..

Check Stock

3 Inch Cross Slide Drill Press Vise, Aluminum Alloy Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount Cross Sliding Vise with Rotating Handle for Wood Working

【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining, maximum jaw is 2.73in.
【High Accuracy】: The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm.
Ergonomic handle of the milling vice clamping machine for easy slide on and off.
【Heavy Duty Construction】: Drill press vice is constructed of high quality aluminum alloy, ensures high hardness and durability.
The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation.
【Easy to Use】: With high-strength accuracy screw, the bench milling vice holder is not easy to slip or deform, provide great stability and easy to use, high working efficiency.
【Versatile Milling Vice Holder】: 3 inch cross slide drill press vise is designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc., great for home use or light professional use.

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Chuck Holder, Milling Tool Holder Not Rusty for Processing Steel and Cast Iron

Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
Easy to use and not rusty, such chuck holder is easy to use in the practical life..
With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..

Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
Screw on triangle style insert with a chip breake.
10 pieces per box, provides longer tool life than uncoated grades.

Check Stock

Carbide Milling Inserts TPCN32PDTR TPG32 Mutilayer Coated Carbide Turning Inserts for indexable End Mill,10pieces/Pack

TPCN32PDTR（TPCN1603PDTR） Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle..
Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
For turning and milling carbon and alloy steels, tools steel and stainless steel.
Screw on triangle style insert with a chipbreaker.
10 pieces per box, provides longer tool life than uncoated grades.

Check Stock

Milling Inserts,Carbide Inserts,10PCS APMT1604 Milling Inserts,Cemented Carbide Lathe Turning Inserts,15-50HRC Hardness,Suitable for fine and semi-fine milling of Stainless Steel M Materials

PRODUCT PARAMETER: Item Type: Milling Inserts.
Processing Material: Steel, stainless steel, etc..
PRODUCT PERFORMANCE: APMT1604 Insert is made of hard alloy titanium plating, wear resistance and incisive blade.wear resistance, good strength and toughness, heat resistance and corrosion resistance..
SAFE & DURABLE: Great processing and high quality, provide fast cutting.Smooth chip removal, high hardness, high heat resistance.High-precision passivation treatment, leading coating process, long service life..
APPLICATION: The Milling Inserts Suitable for fine and semi-fine milling of stainless steel M materials..
CUSTOMER SERVICE: If you have any questions, please feel free to contact us. Our professional after-sales team will solve your problem in time..

Check Stock

Adoles Aluminum Door Hinge Jig,Woodworking Door Hinge Template,Slotting Locator,Suitable For Door Lock Jig And Router Jig,Helps You Install Quickly

...uide slots and other slotting applications and designs, newcomers need to adapt to the tool to gain experience after more convenience and fast..
【HINT】Router jig needs to be used with a trimming machine. After the slotting is completed, you need to pay attention to the milling knife touching the hinge jig, which comes with a 12mm chisel, right angle hinge needs to be trimmed to a right angle before installation.

Check Stock

Milling Tool Holder, Chuck Holder C20-FMB22 Not Rusty Hard Alloy for Processing Steel and Cast Iron

After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
Easy to use and not rusty, such chuck holder is easy to use in the practical life..
Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..

Check Stock

JTR 3pcs 90 Degree BAP300R End Mill Holders Indexable Inserts Tool Holder with 10pcs APMT1135PDER Milling Inserts for Machining Steel Cast Iron

The holder made of 40CrMo , Important material ,solid hard ,High vibration-absorbing performance.
The holders supports high cutting,90° Cutting angle ,Screw down insert.
APMT1135 Miling inserts: For shoulder milling, face milling and slotting.
Design for :Steel /Titanium alloy /Stainless steel / Cast iron.
Improve the surface finish of the workpiece, offer long service time.

Check Stock