ReviewsAlloy Steel Flange

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

• Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
• Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
• Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
• Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
• EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....

Pointer Knob, 1-1/8, 1/4X1/2 PH, 8-32 SS

• Made from alloy steel 5155 with heat treat to RC 56-58.
• Head Diameter?0.747" Head Angle ?15° Drawbar Thread Size?5/8"-11 Machine Taper Size ?CAT40 Neck Diameter?0.549" Hole?0.281" Pilot?0.641" Overall Length?2.001" Shoulder To Head?0.787" Shoulder To End?1.024".
• High quality black oxide finish to ensure long enduring tool life.
• Each retention knob is individually magnetic particle tested to ensure free of crack.
• Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob.

DEER U Road Mountain Bicycle MTB Wheel Hub Front and Rear Skewers Quick Release Clip Bolt Lever Axle QR 145/180 mm, a Pair (Black)

• Smooth cam action lever. Durable deep color 5 micron finish in a wide color range. Extruded CNC machined alloy hub nut with large flange..
• Axle diameter: about 4.5 mm. Front Skewer Size: 145 mm. Front Skewer Weight: 46 grams. Rear Skewer Size: 180 mm,Rear Skewer Weight:51 grams..
• Durable and compatible with most road bikes, mountain bikes, MTB, BMX..
• Easy to set up and quick installation, perfect for replacement, as soon as installed, you can use your bicycle like new..
• APPLICATION - The axles fit for the majority of 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike..

ALLOYPRO 60pcs Large flange blind rivets Aluminum,Flange Diameter 5/8 16 mm ,Pop Rivets Assortment Kit Blind Rivet by Bolt Dropper,3/16 x 5/8 Inch,grip range 8-12mm

• Material: Aluminum alloy rivet body, corrosion-resistant, never rust,our hardware is very strong , good stability and long service life..
• Large flange: Large flange has stronger riveting force, larger supporting surface and special protection for soft materials. It is suitable for fixing soft surface materials and splicing objects in various indoor and outdoor scenes..
• Dimensions: Hole 3/16 inches (4.8 mm), length: 5/8 inches (16 mm), outer diameter of large flange: 5/8 inches (16 mm). Recommended grip range: 3/16 inch (4.8 mm) diameter, recommended riveting thickness: 1/3 inch-1/2 inch (8-12 mm)..
• Quality: Good workmanship, thick and stable riveting body, smooth core pulling, fastness and durability..
• Packing: 60pcs，3/16"x5/8"(4.8x16 mm) blind rivets with large aluminum flange..

Kashaipu Exhaust 3" Exhaust Collector Flange Oval 2-Bolts Flanges Manifold Muffler Connect Cat-back 3" Inch ID Pipe (3" inch)

Solid Brass Door Stop, Decorative Door Stopper Wall Protector, Heavy Duty Door Stop with Rubber Bumper Tip for Wall Door Protection Sound Dampening, Brushed Gold Brass Plated

• 【SOLID BRASS】Our door stops are made of premium brass material, heavy duty and durable. This well made brass door stop is much stronger and nicer looking compared to the ones made of zinc alloy and usual stainless steel. The whole body and the base flange are all brass metal. You will find it thick and sturdy when you receive it..
• 【DECORATIVE DESIGN】Made of high quality brass and treated with great coating, this door stop protects against corrosion and rust. And its awesome brass color helps to match your home and office style. It will be a subtle yet impactful addition to your room..
• 【DOOR and WALL PROTECTION】Our door stop with soft rubber tip prevents damage to your door and wall. It is ideal for wall and door protection in home, offices and hotels. With our well made door stops, no doorknob holes and scrapes on your wall anymore and no loud noise when fast swinging doors..
• 【PERFECT FOR YOUR HOME】The brass door stopper has an attractive classy shape without any sharp edges. The good rubber tip protector stays tight, is friendly to children and pets. And its body can be firmly screwed into the base flange, not easy to fall off. Perfect for your bedroom, bathroom, living room, and office etc..
• 【EASY INSTALLATION】 The door stops are 82....

PQYRACING Turbocharger Adaptor Flange T25 T28 GT25 GT28 5 Bolt to 3' v Band Turbo Outlet DOWNPIPE Flange Adapter

• Adapter body material: Common stainless steel,V band flange material: 304 stainless steel Material: Cast & CNC machined forged billet T6061 aluminum.
• Turbo discharge flange material: Laser cut mild steel with chrome plated.
• Not blow out like the cheap paper ones,Design for turbo application.

InSinkErator QLM-00 Flange Quick Lock Disp Mount, Stainless Steel

• DISPOSER SINK FLANGE: Available only from InSinkErator, this Polished Stainless Steel sink flange features the Twist-On, Twist-Off Quick Lock design that helps ensure fast and easy replacement of existing disposer mounts..
• FOR STAINLESS STEEL SINKS: This polished stainless steel InSinkErator sink flange complements most stainless steel sinks..
• AMERICA'S #1 DISPOSER BRAND: There are more American-built InSinkErator garbage disposals in US homes than all other brands combined. A full line of models means there's one right for every need and budget..
• FASTER, CLEANER, SMARTER: From meal prep to cleanup, InSinkErator helps make it fast & easy to keep your kitchen clean with our iconic appliances: garbage disposals & instant hot water dispensers..
• A HISTORY OF INNOVATION FOR THE SINK: We invented garbage disposals in 1927, & we're the world’s largest manufacturer of garbage disposals & instant hot water dispensers for home & commercial use..

Attwood Attwood 66074-3 Stainless Steel Deck Fill Replacement Cap and Chain fits Attwood Deck Fills with a 3.0” Flange Size

• Replacement Cap and Chain for Attwood Deck Fills with 3.0” Flange Size (66446C1 Gas, 66407C1 Diesel, 66408C1 Water).
• Attaching beaded chain included with cap.
• High-polish Enhanced 316 stainless steel alloy.
• Flush cap is slotted for separate key (sold separately) and features an O-ring that seals the cap watertight..

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

• Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
• Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
• Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
• Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
• Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..

BLACKHORSE-RACING 3' Vband 90 Degree Elbow Adapter Flange Kit to T4 Turbo 304 Stainless Steel Cast

• ▲ 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. Vband Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
• ▲ Cast Turbo Elbow Adapter + Vband Flange and Clamp Kit, One Pair. T4 to 3" V-Band.
• ▲ Flange Is Threaded with 4 M10x1.5 Holes, T4 Turbo Flange (to Turbo Side).
• ▲ 3" Vband Flange (to Header/Manifold Side).
• ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service..