ReviewsAlloy Steel Tubes

Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI

  • Tuff tooth design reduces tooth strippage.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • Wavy tooth set helps prevent stripping for cutting thin workpieces.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

Lenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

TRiPEAK 12T+12T SRAM Oversized Ceramic/Steel Bearing Jockey Wheel Pulley Set for 10/11Speed OSPW Sram Red/Force/Rival Groupset Road Cyclocross Gravel Rear Derailleur

  • Aluminum Alloy Hubs with Precesion Ball Bearings.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox QXP Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 120" Length, 1" Width, 0.035" Thick, 5-8 TPI

  • QXP vari-tooth design with high positive rake and deep gullets for high-production cutting.
  • Bimetal for cutting carbon steel, alloy steel, bearing steel, mold steel, tool steel, stainless steel, and aluminum and other nonferrous materials.
  • Good for cuts in solid shapes, cylindrical tubes, and sheets.
  • Vari-raker set for multipurpose cutting applications.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

Sharp-tec Speed Pipe Cutter, 1/4-inch to 2-1/2-inch (6-64mm) Adjustable Aluminum Alloy Tubing Cutter, Plumbing Pipe Cutting Tools for Copper, PVC, Brass, Aluminum

  • 【Speed Pipe Cutter】 — Quick and easy way to get clean rounded cuts on tubing from 6-64mm (1/4''~2-1/2'') outer diameter in tight areas and close quarters with Sharp-tec Tube Cutter..
  • 【Aluminum Alloy Heavy-Duty Cutter】 — Made of high-quality Aluminum Alloy, which is durable and resistant to corrosion and rust. Safe and durable with strict quality testing..
  • 【Adjustable Depth & Precis】 — Adjustable cutting depth designed for fast and safe cutting. Works well and makes precise cuts. Features a solid adjustment knob which provides a firm grip. Cutting tubes quickly and precisely..
  • 【Spare Blade】 — Includes one spare blade in the handle. Nice workmanship also ensures lifetime durability. It reams quick, clean, easy inside and outside diameter beveling of tubes. BE CAREFUL NOT TO clamp too tightly, it may cause the blade to break!.
  • 【Ergonomic and Easy To Use】 — Easily cuts copper, brass, aluminum, steel, and plastic pipes. The Ergonomic design also makes it comfortable, stable to handle, and safe in cutting..
Check Stock

SOMA Tire Lever Steel Core Card (Pack of 2)

  • Slim, classic shape gets under beads easier than wider levers.
  • Nylon plastic exterior will not gouge alloy rims or pinch tubes.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Libraton Copper Cutter, Tubing Cutter with Deburring Tool Heavy Duty Mini Pipe Cutter for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean. Strong corrugated knob for comfortable stable operation..
  • [Wide Application] The copper tube cutters' cutting range is up to 2" (50mm)(OUTER DIAMETER). The Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Easy To Operate]: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 86690LPB72360 LXP Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 4-6 TPI

  • LXP vari-tooth design with a high positive rake angle and deep gullets for increased material penetration and chip-carrying capacity compared to standard tooth.
  • Bimetal for cutting carbon steel, alloy steel, bearing steel, mold steel, tool steel, stainless steel, and aluminum and other nonferrous materials.
  • Good for cuts in sheets, solid shapes, and cylindrical tubes.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check Stock