ReviewsAlloy Steel Universal Joint Shaft

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

[Total Size] - Outer Diameter: 12mm / 0.47".
Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
[Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
[Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
[Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
[Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.

Check Stock

Dorman CS650021 Clutch Slave Cylinder Compatible with Select Audi / Volkswagen Models

REACH ALL FASTENERS, EVEN IN TOUGH SPOTS with our ball spring design impact universal joint set, thanks to the smooth and fuss-free 360-degree rotation feature..
USE WITH ANY HIGH-TORQUE IMPACT GUN! The LEXIVON fully impact-grade universal joint sockets are made from robust heat treated Chrome Molybdenum alloy steel..
DESIGNED TO PASS THE TEST OF TIME, your swivel socket adapters are coated with Manganese Phosphate treatment for maximum corrosion and rust protection..
IDENTIFY YOUR COMFORTABLE ADAPTERS EFFORTLESSLY thanks to the Laser-etched sizes (1/2 inch, 3/8 inch and 1/4 inch U-joint drive), while the spring-loaded detent ball will prevent dropping..
100% PROBLEM-SOLVING, 100% RISK-FREE – Meet & Exceeds ANSI (The American National Standard Institute) and backed by our Lifetime Limited Warranty for your complete peace of mind..

Check Stock

Joint Coupling Metal Shaft Coupling Motor Connector - 0.5in×0.9in×2in

CONNECT RIGID RODS-This joint or coupling connects rigid rods whose axes are inclined to each other..
DURABLE-The universal joint is made of premium metal material, which is durable and has a long service life..
COMMON USE-The shaft joint is commonly used for shafts that transmit rotary motion..
BLACK-Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
WIDE APPLICATION-The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..

Check Stock

Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in×0.9in×2in)

【CONNECT RIGID RODS】This joint or coupling connects rigid rods whose axes are inclined to each other..
【DURABLE】The universal joint is made of premium metal material, which is durable and has a long service life..
【COMMON USE】The shaft joint is commonly used for shafts that transmit rotary motion..
【BLACK】Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
【WIDE APPLICATION】The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..

Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..

Check Stock

Heyiarbeit 3mm to 3mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

[MATERIAL] - Universal joint shaft coupling is made of high quality brass, which is strong, wearproof, and durable.
[FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
[FUNCTION] - Shock mitigation, noise reduction.
when the rated torque is exceeded, the coupling can protect the safety of the linkage.
[APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.

Check Stock

Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

[MATERIAL] - Universal joint shaft coupling is made of high quality iron, and then electroplated, much stronger, wearproof, durable to use.
[FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
[FUNCTION] - Shock mitigation, noise reduction.
when the rated torque is exceeded, the coupling can protect the safety of the linkage.
[APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.

Check Stock

OEMTOOLS 25202 Ball Joint Separator, 15/16 Inch Pickle Fork Tool, Heavy Duty Steel Tie Rod Removal Tool, Ball Joint Removal Tool, And Joint Splitter

Pickle Fork Separator Tool: The tapered fork wedge design of this ball joint separator tool focuses on the fundamentals of machine technology for an easy and uncomplicated process.
Precision Performance: Striking the handle with a hammer separates the ball joint cleanly.
Designed with a 15/16 inch opening for a firm hold and secure removal.
Hardened Steel: The heat treated steel alloy construction of this ball joint separator stands up to tough jobs.
Zinc plating resists rust and extends service life.
Thoughtful Design: Ball joint separator handle features a nonslip knurled texture.
Used as designed, this front end service tool will stand up to years of use.
Versatile Uses: This universal ball joint separator can be used for a variety of repairs.
For example, the ball joint tool can also be used on CV drive shafts.

Check Stock

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..

Check Stock

RC Car Drive Shaft, DEVIVAE 4pcs Wheel Transmission Drive Shaft Accessory Parts for 005 1/18 High-Speed Truck

The Metal Splined Drive Shaft made of Hardened steel construction,durable..
Universal joint style, Splined engagement, splines are timed to allow driveshafts to be installed in phase.
Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..

Check Stock

U-Joint Shaft 15mm ID Universal Joint Coupling Rotatable Double Section Coupling Joint 15 * 32 * 85mm DIY Steering Joint

FIRMLY CROSS SHAFT: The double section Cross shaft coupling is applied to rigid rods whose connecting axes are inclined to each other, usually when the rigid rod with complicated path is not easy to work.
THICK UNIVERSAL JOINT: This motor connector consists of a pair of hinges that are close together, these hinges are connected by a horizontal axis, and the other end will also move with the free rotation.
SPECIFICATIONS: Material: Metal--Inner Diameter: 15mm / 0.6in--Outer Diameter: 32mm / 1.3in--Length: 85mm / 3.3in--Weight: 344g / 12.1oz (approx.).
HIGH HARDNESS COUPLING: Our universal joints are made of high-quality metal, which has high hardness, will not be deformed when transmitting torque, is durable and has a long service life.
COMPLETE ACCESSORIES:1 x Universal Joint2 x Screws,Widely used for connecting model cars, model ships, robots, etc.

Check Stock