ReviewsAlternator Bolt Kit

XS Power BIG3-RD Upgrade Kit (XP FLEX, 1/0 AWG, 250A)

  • Replaces your vehicle's battery ground-to-chassis wire, the chassis-to-engine block wire, and the alternator charge output wire.
  • Ring terminals are already crimped to the wires.
  • Kit Contents: 1qty - 6ft 0AWG XP FLEX RD Cable, 2qty - 4ft 0AWG XP FLEX BK Ground Cable, 8qty - XS Power Brand Heat Shrink.
  • Kit contents: 8qty - 0AWG Crimp Terminals, 10qty - Wire Clamps, 10qty - Zip Ties, 10qty - Screws.
Check Stock

10si 12 Si alternator charge wire plug with diode keeps alternator charging at low RPM

  • Delco alternator 10Si and 12Si alternator excit wire plug with diode.
  • Ready to plug into '73 & up GM internally regulated alternator.
  • Special diode prevents engine run and voltage feedback.
Check Stock

Painless Performance 30705 CS-130D Style Internal Fan GM Alternator Pigtail

  • Replacement pigtail for CS-130D internal fan alternator.
  • Kit comes complete with pigtail and a 85-OHM,  5-watt resistor.
Check Stock

ARP 4303302 Stainless 300 Hex Alternator Bracket Bolt Kit

  • CVR PERFORMANCE SBC Mid Head Mount Alternator Bracket Kit P/N 7970-4.
Check Stock

Moroso 63841 Alternator Drive Kit

  • Big Block Chevy with Electric Water Pump This Alternator Drive Kit is crank-mounted and designed with spacers that can be replaced with pulleys to drive other accessories such as external oil and vacuum pumps. Note: Use Moroso 710-97170 Gilmer Drive Pulley if external oil pump is used..
Check Stock

All States Ag Parts Parts A.S.A.P. Alternator Conversion Kit fits Ford 2N 9N 8N

  • Compatible with Ford Tractor(s) 2N, 8N (s/n 263844-earlier), 9N.
  • Includes: Alternator, Resistor, Coil, Wiring Harness, Belt, Brackets, & Hardware Kit.
Check Stock

Michigan Motorsports GM Bosch Alternator Wire Harness Adapter Connector LS1 LS2 LS3 LQ4 LQ9 LM7

  • GM Bosch Alternator Wire Harness Adapter Connector LS1 LS2 LS3 LQ4 LQ9 LM7.
  • GM DR44G Bosch Alternator Adapter LS1 LS2 LS3 LM7 LQ4 LQ9 Plug and Play 6".
  • If you are upgrading your alternator to the DR44G alternator you will need this plug and play adapter. This will adapter your 4 way flat connector to the Bosch connector for the alternator. And the best thing is it is PLUG AND PLAY!.
  • This part generally fits Chevrolet, GMC vehicles and includes models such as Express 2500, Express 3500, Savana 2500, Savana 3500 with the trims of Base Cutaway Van 2-Door, Base Extended Cargo Van 3-Door, Base Standard Cargo Van 3-Door, Base Standard Cargo Van 4-Door, LS Extended Passenger Van 3-Door, LS Standard Passenger Van 3-Door, LS Standard Passenger Van 4-Door, LT Extended Passenger Van 3-Door, LT Standard Passenger Van 3-Door, LT Standard Passenger Van 4-Door,.
  • SL Extended Passenger Van 3-Door, SL Standard Passenger Van 3-Door, SL Standard Passenger Van 4-Door, SLE Extended Passenger Van 3-Door, SLE Standard Passenger Van 3-Door, SLE Standard Passenger Van 4-Door . The engine types may include 4.8L 294Cu. In. V8 FLEX OHV Naturally Aspirated, 6.0L 5967CC 364Cu. In. V8 FLEX OHV Naturally Aspirated. This part fits vehicles made in the following years 2010, 2011..
Check Stock

2-Way Pigtail Plug Connector Alternator Repair Plug Harness Fit for Denso Nippondenso Kubota etc

  • Compatible Model: This alternator repair plug harness fit for GM Cheverolet Corvette Toyota Acura Lexus GMC Pontiac Saturn Nissan Mitsubishi Honda.
  • 2-Way T-shape: The pigtail plug connector harness is designed as 2-Way T-shape, which can be used for a variety of alternator brands and models other than the above models, NOTE: Please confirm whether the pictures are the same before purchasing.
  • Enough Wire Length: The package contains a connector harness, plug and play, with enough lead length for maintenance or connection, so the harness is not too short, please feel free to purchase.
  • 100% Copper Wire: The 2-way alternator repair plug harness is copper wire with built-in cross-linked polyethylene high temperature TXL, when this pigtail is used, a good connection can be established on the alternator.
  • Stable Performance: The pigtail plug connector harness has passed 100% quality inspection before leaving the factory, it is wear resistant, high temperature resistant, has a longer life, and can be used repeatedly.
Check Stock

WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit Power Steering Pump Alternator Pulley

  • Removes pressed-on alternator and power steering pulleys on late-model GM and Chrysler engines..
  • The threaded end installs late model GM alternator and power steering pulleys, including Quad 4.
  • This puller fits some AMC vehicles. Will NOT work on 3.3L and 3.5L Chrysler engines.
  • Reverse the jaws to pull the alternator internal bearing..
  • Case Dimensions: (L)9″ x(W)7.25″ x(H)2″. Weight 2 lbs..
Check Stock

Xislet Alternator Pigtail Connector Replacement Compatible with 72-88 GM Cars Trucks 10SI 12SI 15SI 17SI Alternator Connector Wire Harness PT2288 Repair Kit 88862207

  • Farewell to thinner wires and cheaply made, this alternator pigtail was made of quality wires (The white wire is 14 gauge and the red one is 10 gauge).
  • Build in the cross linked polyethelene high temperature TXL with 100% copper wires, replace it with this pigtail to make a good connection on the alternator.
  • Plug and play, easy to replace the old frayed connector, there is plenty of lead length to make your repair or connection.
  • This alternator pigtail generally fits AMC, Buick, Cadillac, Checker, Chevrolet, GMC, International Harvester, Jeep, Olds mobile, Pontiac vehicles.
  • This pigtail connector for the alternator may fit other models and applications, For additional product information please refer to items specifics or contact us.
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock