ReviewsAlternator Wire Terminals

OTC 4497A Ratcheting Terminal Crimper

Heavy-gauge steel crimping tool designed for insulated wire terminal sizes commonly found on cars, trucks, SUVs, Motorcycles, ATVs, and more.
Ratcheting action crimps terminals to correct tightness on the wire making crimping fast and easy.
Insulated handles with compound mechanical leverage for power.
For wire sizes: AWG 22-18 (0.6 mm -1.0 mm) red terminals.
AWG 16-14 (1.3 mm - 1.6 mm) blue terminals.
AWG 12-10 (2.0 mm -2.6 mm) yellow terminals.
High-grade materials ensure quality performance over the lifetime of the tool.

Check Stock

Victron Energy Orion-Tr Smart 12/12-Volt 30 amp 360-Watt DC-DC Charger Non-Isolated (Bluetooth)

Victron Energy Orion-Tr Smart 12/12-Volt 30 amp 360-Watt DC-DC Non-Isolated Charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth and IP43 protection.
Suitable for both lead acid and lithium batteries, unlimited multiple units can be connected in parallel to increase output power.
With Bluetooth Smart enabled the unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
Screw terminals: The screw terminals give the advantage of not needing any special tools for installation.
For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery.

Check Stock

1200 Piece Non-Insulated Crimp Electrical Wire Terminals Assortment Kit - Ring Fork Spade Butt Splice Connectors & Male Female Quick Disconnect

Non-Insulated Crimp Wire Terminals Are Connectors That Are Used To Mate, Connect, Or Terminate A Single Wire, While Allowing A Connection To A Screw Or Stud Type Electrical Connection. Non-Insulated Wire Terminals Are Best Suited When Special Performance Or Installation Customization. Non-Insulated Terminals Are Commonly Used In Automotive And Marine Vehicles, But Can Be Used In Various Other Electrical Applications..
Non-insulated Crimp Electrical Wire Terminals Available In 22-18, 16-14, And 12-10 AWG Gauge Ring, Fork Spade, Male & Female Disconnects & Butt Splice Connectors..

Check Stock

Attwood 14230-3 Single Pole 4-Way Selector Marine Battery Switch

use for 6-volt to 32-volt D. C. (direct current) systems.
Rated for 300 amps continuous use at 6 volts and 150 amps continuous use at 12 volts.
Includes an automatic alternator field circuit disconnect to prevent surges and so, protect your valuable boat electronics.
Rugged build features Bakelite housing, copper washers, and solid brass terminals and nuts.
Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.

Check Stock

New PM Alternator/Regulator Compatible with/Replacement For John Deere Utility Tractor 2210 2305 2320 2520 MIA10312, SE501843, MIA10338, SE501822, AM877557, AM879144, CH15587, MIA881692, AM877958

New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed).
Specs: Alternator, Voltage: 12, Amps: 15, Notes: Permanent Magnet, Closed Back.
Specs: Regulator, Electronic & Rectifier, Voltage: 12, Polarity: Negative, Includes Brush Holder?: No, Adjustable?: No, Includes Rectifier?: Yes, Includes Tolerance Ring?: No, Notes: (3) Blue Wires: Stator, (2) Red Wires: B+, (2) Black Wires: B-, (1) Yellow Wire: Ignition, (1) Green Wire: Light.
Replaces OEM Part Numbers: Alternator- John Deere: MIA10312, SE501843, MIA10338, SE501822, AM877557, AM879144, CH15587.
Replaces OEM Part Numbers: Regulator- John Deere: MIA881692, AM877958.

Check Stock

Pastall 970Pcs Wire Ferrules Kit Tinned Copper Crimp Connector Non Insulated Electrical Cable Pin Cord End Terminal Assortment Kit with 48Pcs Heat Shrink Tubing

540 pcs assorted crimp terminals: ring terminals, spade Terminals, Bullet Male & female, butt Splice & connectors, fork spade, and piggy back.
Wire terminals kit providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic connections..
Wire range: 22-16 ( Red )/ 16-14 ( Blue )/ 12-10 ( yellow ) a. W. G..
All insulated electrical terminals are nicely enclosed in plastic case for easy access and carry..
Wire terminal connectors are made with copper core, tin plating and PVC insulator. Ideal for garages, auto electricians, mechanics, workshops etc. . . Suitable for cars, vans, motorcycle, homes etc..

Check Stock

Moroso SWITCH,BATT DISCONNECT,SPR/DUTY (74102)

Moroso's Super-Duty switch with rating of 2000 amps intermittent and 300 amps continuous is perfect for engines with large starter draw, RVs, Drag Cars with alternators and other applications (20 amps on small terminals).
Two pairs of copper studs (1/2" -20 & 10 -32) make it ideal for disconnecting alternator (or other electrical device) in addition to the battery.
Sealed shaft keeps out moisture and debris.
Indexing pin aligns switch with mounting panel and prevents rotation.
also includes decal to indicate switch location during emergencies.

Check Stock

WMYCONGCONG 3 Kits 8 Pin Way Waterproof Electrical Connector Plug for Car Automotive (8 Pin)

8 pin way waterproof electric wire cable connector plug, fits 1.8mm terminals wire, designed for 22-18 AWG wire..
Waterproof cable connector, not be affected by water, dirt, fog, or other chemicals, convenient to use..
Ideal for car, truck, boat, motorcycle, trailer lighting systems, motorcycle, electric vehicle, household appliances, computer wire connector, and other wire connection..
Male Terminal Length: 24*23.5*36mm/0.94*0.93*1.42in(max.L*W*H).
Female Terminal Length: 31*30*27mm/1.22*1.18*1.06inch(max.L*W*H)..
Package Content: 3 * male connector housing, 3 * female connector housing, 24 * male terminals, 24 * female terminals, 48 * silicon rubber cable seals..

Check Stock

800PCS Wire Ferrules Sopoby Insulated Ferrule Crimp Pin Terminal Kit for Electrical Projects AWG 24-10 8 Sizes

Type: Ferrule Cord Pin End Terminals Connectors.
Ferrule Wire Range: 24-10 A.W.G. *** 0.3-6.0mm².
Material: Copper + PVC *** Package Includes: 800pcs wire ferrule terminals.
100% Brand-New High Quality Wire Ferrules Cord Pin Terminals, compliant with RoHS..
The ferrules can be used to wire up a machine with a PLC, HMI and power supply, speakers or other electronic equipment. They are easy to use and....

Check Stock

HKS 800 PCS Solder Seal Wire Connectors - White 26-24 AWG - Heat Shrink Solder Butt Connectors - Tinned - Automotive Marine Boat Crimp - Waterproof and Insulated

...lder seal wire connector,adequate solder around the wire, melt and flow until form seal on the wire..
[Easy Application]Strip wire insulation, use wire crimper crimp Heat Shrink Wire Connector and wire , apply heat with a heat gun while rotating a terminal. Electrical wire terminals crimp connectors will reduce in size and adhere to the wire.No need soldering set . Safe durable connection Finish quickly..
[Easy Identification]Different color Heat Shrink Wire Connector kit terminal with wire gauge imprint provides easy identification. measure your wire, and easily choose the right connector by looking at wire gauge imprint on electrical wire terminals crimp connectors..
[Insulated Waterproof Seal Prevents Wire Corrosion]Whether you are working on your boat, motorcycle ,vehicle, home or scientific project, our Heat Shrink Wire Connector electrical wire terminals crimp connectors will ensure strong crimps, increased current flow and waterproof connections every times..
[Advance Heat Shrink Tubing] Insulation tubing shrinks to 1/3 of its original size, providing the highest shrink rati....

Check Stock

Nilight 540PCS Mixed Quick Disconnect Electrical Insulated Butt Bullet Spade Fork Ring Solderless Crimp Terminals 22-16/16-14/12-10 Gauge Electrical Wire Connectors Assortment Kit 2 Years Warranty

540 pcs assorted crimp terminals: ring terminals, spade Terminals, Bullet Male & female, butt Splice & connectors, fork spade, and piggy back.
Wire terminals kit providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic connections..
Wire range: 22-16 ( Red )/ 16-14 ( Blue )/ 12-10 ( yellow ) a. W. G..
All insulated electrical terminals are nicely enclosed in plastic case for easy access and carry..
Wire terminal connectors are made with copper core, tin plating and PVC insulator. Ideal for garages, auto electricians, mechanics, workshops etc. . . Suitable for cars, vans, motorcycle, homes etc..

Check Stock