ReviewsAlu zinc Coated Steel Coil

Electrodepot 60 Amp 4 Pole Normally Open Contactor 110-120V Coil Motor Load 40A Lighting 63A Bundle with Slotted Steel Zinc Plated DIN Rail 35 mm x 6 in – 1 Piece with 2#10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head....
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

3'/4' Drop Lowering Kit with Spindles For 1982-2004 Chevy S10 4CYL 2WD by TSS

  • Compatible with 1982-2004 Chevy S10 2WD 4-CYLINDER.
  • FRONT: MaxTrac 1" Drop Coil Springs, MaxTrac 2" Ductile Cast Iron Drop Spindles / Knuckles.
  • REAR: 4" Aluminum Angled Drop Blocks, (4) Zinc Coated U-bolts.
  • NOTE: 4X2 2WD model required. 4-CYLINDER model required.
  • The Suspension Specialists is an American company with fast shipping, technical support available, and products you can count on. Please see our description for further details, or contact us for assistance.
Check Stock

Pair Rockville X6.5C Competition 6.5

  • ...er coils in them for advanced sound filtering to give you the best sound quality), Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each.
  • Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket, Oversized 1.5 ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78 inches, Impedance: 4 Ohms, Tweeter Size: 3.86' x 1.97 inches, Cutout Diameter of Tweeter: 2.80inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off, Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz 20,000 Hz.
  • Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1 Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-installed mounting screws included.
  • Features of Included Crossovers: 2-Way Passive Crossover Network, One Pair of 4-Ohm Audiophile Grade Crossovers, Gold Plated Screw Terminals, Hingtat 100V Capacitor Modules (Best in Class), High Quality CCAW Coil Windings (Best in Class), High Gr....
Check Stock

Air Compressor Accessories Creallr 20 Pieces Air Compressor Tool Kit Air Hose Fittings with 1/4 Inch NPT Plug/Connect/Coupler Air Blow Gun 25Ft Recoil Air Hose and Dual Head Air Chuck

  • 【Flexible In Use】The air compressor hose kit compares to standard air compressor hoses, the 1/4 "x 25 ft coil air hose has 1/4" MNPT connections....
  • 【Quick and Easy Connect System】1/4"NPT I/M type industrial air quick coupler and plug of the compressor fittings with pre-coated sealant thread....
  • 【Complete Accessories】The air compressor tools include air blow gun with 5 different nozzle attachments, sealing tape, pencil tire gauge, heavy....
  • 【High Quality Material】The air compressor attachments are made of premium corrosion resistant zinc plated hardened steel construction for longer....
  • 【Reliable Service】We provide 30-day money back service and 12 months service. If you have any questions, please contact us at any time, and we'll....
Check Stock

Southco E3-19-25 Series Vise Action Powder Coated Zinc Alloy Tool Operated Compression Latch with Slotted Recess Head,Black

  • Material : Zinc alloy, powder coated and steel, zinc plated.Exquisite workmanship，Wear and durable.
  • Surface : Black powder coated or chrome plated. Corrosion resistant and no rust.
Check Stock

ACDelco Professional U505 Ignition Coil

  • high quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown.
  • silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly.
  • laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed.
  • professional, premium aftermarket replacement.
  • provides the performance and dependability you expect from acdelco.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • ...e brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
  • 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof process extends its service life. Even if you can't use it up in a short time, you don't have to worry that it ....
Check Stock

WEN Steel Saw Horse Set, 1300-Pound Capacity, Height Adjustable, Two Pack (WA1302)

  • Includes two sawhorses for a combined capacity of up to 2600 pounds.
  • Adjust between 9 different heights ranging from 24 to 32 inches.
  • Lightweight, collapsible design and onboard carrying handle make for easy storage and transport.
  • Features pivoting feet, 43-by-5.75-inch powder-coated zinc-plated support surfaces, durable steel construction, quick release height adjustment, and foldable material support pegs.
  • Powder-coated zinc-plated surface prevents workpieces from marring and slipping.
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and t....
Check Stock

INVERT Pro Scooter Premium Quality BMX Stunt Scooter for Kids 10 Years and Up Perfect Trick Scooter for All Riders Lightweight Deck Integrated Headset Alloy Wheels ABEC Bearings Powerful Brake

  • Most suitable for the 10-14 year old age range, the L3 scooter is the top of line Invert complete with all the bells and whistles you....
  • When looking at the Invert L3 complete you'll noticed a bunch of features that put this scooter in a category of it's own for its price, from....
  • 20.5" L x 4.7" W (520 x 120mm) 6061-T6 Alu deck with front and rear angled inserts, 2 Bolt 6061-T6 Alu Clamp, Invert 165mm TPR 25A grips....
  • No shortcuts were taken in the making of the L3 Invert Supreme scooters, from the materials used on each part down to smallest details.....
  • Stainless steel forged forks enables this scooter to be compatible with 30mm wheels. Abec 9 chrome steel bearings ensures speed and....
Check Stock

1/4 -20 T-Nut 100 Pack Zinc-Plated Steel Corriosion Resistant 5/16 Barrel Length 4-Pronged Tee Nut for Wood Rock Climbing Holds and Cabinetry by Bolt Dropper

  • High Quality Steel: This T Nut is zinc coated steel which is one of the most prevalent types of corrosion-resistant coatings, making it last longer than other nuts on the market today..
  • T Nuts You Can Depend On: Our T Nuts are very strong and are great for both indoor and outdoor use. This zinc-coated carbon steel is superior to regular steel and provides excellent rust resistance..
  • Great To Keep Around: Bolt Dropper Tee Nuts are great to have around for use in all of your projects needing a wood nut insert. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%..
Check Stock