ReviewsAluminium Alloys

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 1/2\-13 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 3/8 -16 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof T Groove Security Nuts Zamak 5 Zinc #10-24 Qty 25

  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • Installed using a special tri groove socket (sold separately).
  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Check Stock

VIGRUE 80Pcs Sanding Discs Set, 2 Inches Quick Change Discs with 1/4 inch Holder, Surface Conditioning Discs for Die Grinder Surface Prep Grind Polish Burr Rust Paint Removal with Container

  • 15 x Nylon SiC sanding discs (Coarse/ Medium/ Fine).
  • 35 x Aluminium Oxide Discs (36 Grit/ 40 Grit/ 60Grit/ 80Grit/ 120 Grit/ 180Grit/ 240Grit).
  • 25 x Zirconium oxide Discs (60Grit/ 80Grit/ 120Grit/ 180Grit/ 240Grit).
  • Total 80pcs sanding discs all come in a convenient transparent box.
  • 【High Performance】 Nylon SiC (Silicon carbide) discs feature open-mesh 3D structure with superior hardness and brittleness, leading to good elasticity and plasticity, suitable for different shape objects.
  • Aluminium Oxide discs combine quality aluminium oxide sandpaper and strong R-lock shank base.
  • Zirconium Oxide with strong cutting force and long service life, apply for polishing hard metal, such as titanium alloy.
  • 【Extensive Application】 Assorted Girts (from 36 to 240) of 2 inch sanding discs fits various surface such as stainless steel, alloys, iron, non-ferrous materials.
  • conditioning and preconditioning, oil paint removal, rust removal, glue or adhesive removal, self-sharpening, sanding, cleaning, grinding, stripping, deburring, polishing, finishing, etc..
  • 【Quick-change & Steady Design】 With unique safety torque spiral, the connection between sanding disc and holde....
Check Stock

(500pcs) #10-24 Security Break Away Nuts Aluminum Ships FREE in USA by Aspen Fasteners, AFTPR-171070-D

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Barb Drill Bit, Multiple Sizes Tapered Hole Drilling with Center Punch for Metal Plastic Wood Plates

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

uxcell 4Pcs 6063 Seamless Aluminum Round Straight Tubing Tube 1 Feet Length 0.234 Inches ID 0.312 Inches OD

  • The aluminium tube is commonly used for frames, boat building, gardening products, general fabrications and shop fitting,DIY aircrafts or other remote control models..
  • Aluminum Round Tubes are available in alloys 6063 offering better corrosion resistance and weldability than other Aluminum Round Tub.
  • The interior is smooth with no seam and is available in an extruded structural or a drawn seamless aluminum round tube for higher precision applications..
  • It can be easily cut and drilled, and can be welded with the right equipment..
  • Different size aluminum tubing for your needs. Please check it right before purchasing..
Check Stock

(5000pcs) 1/2-13 Security Break Away Nuts Zinc Die Cast Ships Free in USA by Aspen Fasteners, AFTPR-171110-M5

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

(500pcs) 1/2-13 Security Break Away Nuts Zinc Die Cast Ships FREE in USA by Aspen Fasteners, AFTPR-171110-D

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

THINBIT 3 Pack SPT045D5 'S' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

Coceca 48pcs Roloc Disc 2 Inch Quick Change Discs with 1/4'' Holder Surface Conditioning Disc, Fine Medium Coarse for Die Grinder Sanding Disc Surface Strip Grind Polish Burr Paint Removal

  • Three Attachment Offers: Our 2 inch roloc sanding discs include three different type of grits and grains for attachment offers: Fine, medium and Coarse. 16 pieces of each quick changing discs brings a longer life for die grinder to use..
  • One Free Holder: We offer a 1/4 inch Rubber Holder, which can easily connect with almost all drill drivers and save your time. Premium Material: The surface conditioning discs made of superior aluminium oxide. Open nylon web structure with better elasticity and plasticity for objects of various shapes..
  • Premium Material: The surface conditioning discs made of superior aluminium oxide. Open nylon web structure with better elasticity and plasticity for objects of various shapes..
  • Wildly Used: Quick Changing discs not only good for cleaning and finishing on stainless steel, alloys, non-ferrous materials and almost all kind of metals, but also can be used for removal of light rust, oxides and coatings..
  • Enjoy Your Purchasing: Our team is always pleasure for any concern you may have. We take pride in the quality of our surface conditioning discs, if you have any questions, please feel free to contact us..
Check Stock