ReviewsAluminium Engine Oil Cooler

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Dorman 625-209 Engine Oil Cooler Hose Assembly Compatible with Select Cadillac / Chevrolet / GMC Models

  • Ideal replacement - this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
  • Quality materials - this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
  • Easy to install - no special tools required.
  • Quality tested - rigorous quality control ensure this hose assembly conforms to product standards.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

3C3Z6A642CA Engine Oil Cooler Kit for 2003-2007 Fo-rd F250 F350 F450 F550 Super Duty 6.0L V8 Diesel Engine 904-228 AKWH

  • The oil cooler is a device that accelerates the heat dissipation of lubricating oil to keep it at a lower temperature. On high-performance, high-power enhanced engines, due to the large thermal load, an oil cooler must be installed..
  • OEM: 3C3Z-6A642-CA, 3C3Z6A642CA, 904-228 3C3Z 6A642 CA, 904228, 3C3Z6A642AA, 3C3Z6A642BA, 3C3Z6A642BB, 1886511C93, 3C3Z-6A642-AA, 3C3Z-6A642-BA, 3C3Z-6A642-BB, 904-228, 015339, OCK388.
  • 6.0 Power-stroke Oil Cooler Fits: 2003-2007 Fo-rd F250 F350 F450 F550 Super Duty 2005-2010 E250 E350 E450 Super Duty 6.0L V8 Diesel Engines ONLY. 6.0L V8 Diesel Engines ONLY!.
  • Function: Engine oil is vital to most engine components. A faulty oil cooler can cause many problems, including cooling system failure and engine damage (leakage, overheating, and scarring due to the loss of lubricating properties of overheated oil). It is important to keep all parts of the lubrication and cooling system running properly so that your car can be used. If it is not handled in time, it will directly cause engine failure. You need to replace a new oil cooler for this problem..
  • Please BE AWARE that the vehicle compatibility list may not be 100% accurate. However the OE number provided in our listing is.If you are not certain about compatibility of the parts y....
Check Stock

Oil Filter Housing Oil Cooler Kit - Compatible with 2014-2017 3.6L Dodge Avenger, Journey, Durango, Jeep Wrangler, Grand Cherokee, Chrysler 200, 300, Town & Country - Replace 68105583AF 68105583AE

  • OIL FILTER HOUSING OIL COOLER KIT - Also known as Oil Filter Adapter or Oil Cooler Housing, encases and protect the oil filter for your vehicle, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine..
  • FIT THE FOLLOWING VEHICLE - Compatilbe with 2014-2017 3.6L V6 Pentastar, including 2014-2017 Chrysler 200, 2014-2017 Chrysler 300, 2014-2016 Town & Country, 2014 Dodge Avenger, 2014-2017 Dodge Challenger, 2014-2017 Dodge Charger, 2014-2015 Dodge Durango, 2014-2017 Dodge Grand Caravan, 2014-2017 Dodge Journey, 2014-2017 Jeep Cherokee, 2014-2015 Jeep Grand Cherokee, 2014-2017 Jeep Wrangler, 2014-2017 Ram 1500, 2014-2015 Ram C/V, 2014-2018 Ram ProMaster 1500 2500 3500..
  • REPLACE PART # - Oil cooler replace Mopar 68105583AF 68105583AA 68105583AB 68105583AC 68105583AD 68105583AE, include Oil Filter, Temp Sensor, Bypass Valve, Spring, and Gasket. Commonly found on 14, 15, 16, 17 Chrysler 200, 300, Town & Country, Dodge Avenger, Challenger, Charger, Durango, Grand Caravan, Cherokee, Grand Cherokee, Wrangler, Wrangler JK, Ram 1500, C/V, ProM....
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

PQY 10 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 10 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10 Oil Capacity: 0.24L.
  • Package include:1x 10Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock

PQY 16 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 16 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10.
  • Package include:1x 16Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock

DPI 618 Factory Style 1-Row Cooling Radiator Compatible with Chevy GMC C/K Pickup/Suburban AT 88-95, Aluminum Core

  • ▶️ This radiator is compatible with Chevy GMC C1500 C2500 C3500 K1500 K2500 K3500 AT 1988-1993, Chevy GMC C3500HD AT 1992-1994, Chevy GMC C1500 C2500 K1500 K2500 Suburban AT 1992-1995, fits 4.3L 5.0L 5.7L without engine oil cooler..
  • ▶️ Come with [1] brand new radiator, improve engine cooling efficiency..
  • ▶️ It is constructed of high quality full T-6061 aluminum construction core to ensure a long lasting performance life..
  • ▶️ Lightweight direct bolt-on OE fitment or replacement for the factory unit, perfect fitting and running. No need drilling or modification, easily for the installation..
  • ▶️ Rows: 1 | Core Dimension: 28-1/4" W X 17-1/4" H X 1-1/4" D | Inlet / Outlet: 1-5/16" 1-9/16" | Transmission Oil Cooler(TOC): Yes | Engine Oil Cooler(EOC): No | OEM Part Number: 3058768 52457841 52457843 0069188 | Parkslink Number: CU618 618 CU617 CU618CC.
Check Stock

Aluminum Oil Cooler Oil Filter Housing | Replacement for 3.6L 2011-2016 Dodge Journey Grand Caravan Jeep Wrangler Chrysler 200 300 Ram ProMaster & More | Replaces# 926-876, 5184294AE, 68105583AF

  • 【UPGRADED VERSION】This upgraded engine oil cooler assembly is made entirely of die-cast aluminum, which helps prevent fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life.
  • 【PREMIUM QUALITY】Long life-span matters, that is why our 3.6 oil filter housing comes with high-grade filter medium, die-cast aluminum housing, OE standard coolant temperature sensor and precision manufactured oil pressure switch for you to put an end to oil leaks.
  • 【REPLACEMENT FOR】2011-2016 Chrysler 200 300 Town & Country | 2011-2016 Dodge Challenger Charger Journey, 11-15 Durango, 11-13 Caravan, 14-16 Grand Caravan, 11-14 Avenger | 2011-2016 Jeep Wrangler, 14-16 Cherokee 3.2L, 11-15 Grand Cherokee | 13-16 Ram ProMaster.
  • 【REPLACE OE NUMBER】926-876, 5184294AE, 68105583AF, MS97204. The oil filter adapter has undergone extensive testing, means you will get a fairly reliable oil cooler housing to perform excellently under all operating conditions.
  • 【24-MONTH WARRANTY】If for any reason at all, you are not fully satisfied with the 3.6 e....
Check Stock

3mirrors Aluminum Engine Oil Cooler Filter Housing Adapter Replacement for 2017 2018 Dodge Chrysler 3.6L & 3.2L Oil Radiator Assembly 68310865AB with Sensor& Manifold Gaskets 68310865AA, 68310865AC

  • Direct Replacement OE number, 68310865AB, 68310865AA, 68310865AC, Engine Oil Cooler Compatible with 2017 2018 Ram 1500 ProMaster 1500 ProMaster 2500 ProMaster 3500 3.2L and 3.6L engines..
  • The Oil Cooler is a Replacement for 2017 Chrysler 200.
  • It's an Upgraded Aluminum alloy oil cooler housing kit, The radiator parts are welded layer by layer of aluminum alloy plates, with High and low-temperature resistance. All parts are tested with high-pressure fluid..
  • The Oil Cooler Filter will help you solve the problems of oil leaking, oil temperature too high and oil pressure too low. A good oil cooler filter assembly can keep the engine running normally, making you have a safe and comfortable driving experience. A worthwhile investment for your car..
Check Stock